Latest activity
-
Why is moving docker to vms not an option? Running docker inside lxcs isn't supported for a reason after all -
Rrandyqx replied to the thread allow user to only access one vm's console/terminal.thanks, but i do not see how to connect the dots. i know how to put users in group foo, which has role bar. but when i create a role bar, with privileges VM.Console, VM.PowerMgmt. how do i say *which* vmid? perhaps i should be using the cli...
-
Sschmensch replied to the thread [TUTORIAL] Disk prevent from spinning down because of pvestatd.Old thread, but I tried editing /etc/lvm/lvm.con like this to exclude my WD drives from the vgscan: global_filter=["r|/dev/zd.*|","r|/dev/rbd.*|","r|/dev/disk/by-id/ata-WDC_WD.*|"] This caused the drives to be displayed with a question mark in...
-
news reacted to TErxleben's post in the thread Proxmox VE 9.2 – kompletter Host-Freeze / Hardreset nötig with
Like.
Das habe ich bei dem e1000-Problem noch nie erlebt. Deutet tatsächlich auf ein HWProblem. Da bin ich dann ganz bei @news. Zusätzlich ein Wärmeproblem in Betracht ziehen. Also Lüfter kontrollieren. -
Ddovah replied to the thread Intel e1000e Regression Causing Proxmox Host Freezes — Resolved by Removing Onboard NIC.While ethtool -K eno1 tso off gso off does fix the issue, it causes significant overhead on the CPU especially on a lower end CPU like the i3-8300 causing the entire system to stall. Is there no better solution? Thinking of attaching a USB...
-
Sshodan replied to the thread Can a Proxmox VM Feel Like Bare Metal? Dual 144Hz + GPU Passthrough + Low Latency.Hi, I'm on the same side-quest as you. This topic that is roughly called "single gpu passthrough", but that I call the "Hypervisor Desktop" (as opposed you typical desktop hypervisor, which is basically just running virtualbox. And as you can...
-
Kkawano-y replied to the thread Proxmox 9.2.4 boot error - kernel panic.If you want to repair the original installation, I would first inspect the old disk from the new Proxmox install before making any changes. For example, check whether the old root filesystem, /boot, and VM configuration files are still present...
-
CCookiefamily posted the thread Mirroring enterprise PDM repos in POM in Datacenter Manager: Installation and configuration.Hello, I was wondering how I could mirror my enterprise PDM repo in POM. Usually the enterprise PDM repo should be unlocked once >80% of the PVE nodes managed have a valid >=Basic subscription. I have a PDM with 4 nodes right now that are all...
-
Ddaveanderson replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host.While the firmware may improve the behavior, for us, it seems like whatever was making the firmware or kernel wig out was the autonegotiation. Fully agreed on the "there are many versions to test" statement though. We had 4 machines working...
-
Bbegeis posted the thread Proxmox 9.2.10 error when I do Upgrade on PVE Updates in Proxmox VE: Installation and configuration.I get the following error when I try to do an Upgrade on PVE Updates (schould do Upgrade from 9.2.10 to 9.2.11) zfs-linux (2.2.2-5~exp3) experimental; urgency=medium zfs-linux has now opted-in usr-merge. No behavioral changes should be...
-
-
TTErxleben replied to the thread Proxmox VE 9.2 – kompletter Host-Freeze / Hardreset nötig.Und das Lüfterrad mit einem Zahnstocher o.ä blockieren. Du wärst nicht der Erste, der einem Lüfter mit Druckluft den Hals umdreht.
-
It should not let you migrate neither the CT nor the VM. If it did, once you migrate a VM from pve-4 to pve-2, in the next ha cycle (~10 seconds) HA would say "this VM on pve-2 has another node with higher priority and the node is up, let's... -
gurubert reacted to t.lamprecht's post in the thread Ceph CVEs – keyring rotation strongly advised, probably required in the future with Like.
This can be done gradually, but needs a bit of care. We're currently in the process of finishing a migration helper tool and providing documentation for how to do this. -
Jjestep replied to the thread DSLicSrv anyone move this to Proxmox Successfully? Specifically from Nutanix.That is the only thing I changed going to Nutanix. But I agree since that is what I am seeing.
-
bbgeek17 replied to the thread DSLicSrv anyone move this to Proxmox Successfully? Specifically from Nutanix.I do not condone trying to circumvent vendor's protection put in place to prevent what you are trying to do. That said, I'd be somewhat surprised if MAC was the only thing that they go by. Blockbridge : Ultra low latency all-NVME shared storage... -
Kkawano-y reacted to bbgeek17's post in the thread Shared NFS storage showing status: unknown on 2nd pve host. with Like.
Hi @kawano-y , I think OP may have moved on as this thread is from July 2025. But it is always nice to know what the resolution was! Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Jjestep replied to the thread DSLicSrv anyone move this to Proxmox Successfully? Specifically from Nutanix.I have change it to Dell, Not sure that has anything to do with it though.
-
Jjestep replied to the thread DSLicSrv anyone move this to Proxmox Successfully? Specifically from Nutanix.Yea, that is what I am doing
-
Xxybo replied to the thread DSLicSrv anyone move this to Proxmox Successfully? Specifically from Nutanix.Have you tried to edit SMBIOS settings?
-
-
bbgeek17 replied to the thread DSLicSrv anyone move this to Proxmox Successfully? Specifically from Nutanix.There are a number of different threads to pull here. Nutanix had the benefit of original physical host, and as you can see from the config, it is also obfuscating that the OS is now virtualized. The MAC address may have been the last piece for...
