Latest activity
-
Eepv5jubs reacted to r0bb10's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with
Like.
fairly simple, just boot armbian, add the official proxmox repo wget https://enterprise.proxmox.com/debian/proxmox-release-trixie.gpg \ -O /usr/share/keyrings/proxmox-archive-keyring.gpg cat >/etc/apt/sources.list.d/proxmox.sources <<'EOF'... -
IIsThisThingOn reacted to MarroniJohny's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
Ja, habe atm eine fixe IP mit 10 Gbit. Jetzt bin ich leider noch auf doppelt NAT und Providerbox angewiesen. Will aber den Provider wechseln. Dann gibt es entweder wieder eine fixe, oder gleich ein /29er Subnet. Und nein, ich habe keine Fritte...
-
IIsThisThingOn reacted to DeQuzzie's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
Results, as promised. Hardware and data: PVE 9.1.18, kernel 7.0.2-5-pve, zfs-2.4.2-pve1. The pool is a two-way mirror of 7200 rpm drives (Exos ST12000NM0127 + SkyHawk ST8000VX004), 7.27T size / 6.29T allocated, 86% capacity, 3% fragmentation, no...
-
IIsThisThingOn reacted to daanw's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
If it is "worth it" depends on a lot of things. My use case was archiving as much as possible data on single server with all disk slots used. A 1.3 dedup ratio is not much, but on archiving for example 100TB of data it results in quite a bit of...
-
MMarroniJohny reacted to Bu66as's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
Bei Semi-Sync pass auf den Timeout auf. rpl_semi_sync_master_timeout steht per Default auf 10 Sekunden, und wenn die Replica nicht rechtzeitig quittiert, schaltet der Primary still auf async zurück und läuft weiter. Kein Fehler, nichts was...
-
MMarroniJohny replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.Ja, habe atm eine fixe IP mit 10 Gbit. Jetzt bin ich leider noch auf doppelt NAT und Providerbox angewiesen. Will aber den Provider wechseln. Dann gibt es entweder wieder eine fixe, oder gleich ein /29er Subnet. Und nein, ich habe keine Fritte...
-
BBrandon Lee hat zwei Varianten ausprobiert: https://www.virtualizationhowto.com/2026/08/install-proxmox-arm64-on-a-raspberry-pi-5-this-weekend/...
-
Sswgwolfila replied to the thread Conntrack not working when VM has HA turned on.Hi, this is not only by migrations via HA - but also by bulk migrations... same effect. Only with 1:1 Migration - Select vm via gui und use Option "Conntrack State" then works Migration WITH Conntrack. Please correct Bulk-Migration Gui option...
-
-
Dd.oishi replied to the thread Snapshot best practices.As far as I have researched, I understand that there is no well-established best-practices document for this. This is probably more about the specifications than best practices, but the following patch may eventually be reflected in the...
-
MMarroniJohny reacted to IsThisThingOn's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
So Jungs, kriegt auch wieder ein. Kein Grund für ad hominem Attacken, wir können bei der Sache bleiben. Wenn dies dein Problem war, kannst du dir ja ein VPS bei DigitalOcean oder AWS EC2 holen. Dann bist du selbst "Herr der Sache". Das stimmt...
-
Llonger replied to the thread Snapshot best practices.Interesting topic, I am not aware of performance impact with keeping snapshot for too long or more snapshots means less performance. Indeed "snapshots are no backups" is to be taken seriously therefore ensure to always have your scheduled backup...
-
NNounours replied to the thread Eject RDX after synch Job.Hi, Thanks for your answer, but the https://bugzilla.proxmox.com/show_bug.cgi?id=6598 have more request that i say. In the job synch process on a removal device, there are already "run on mount" and "unmount when done", and this two options are...
-
Leider. Ich finde es tatsächlich ein Problem, dass sich die Support-Community mittlerweile auf zig Kanäle (Forum, inoffizielles Reddit und inoffizielles discord) verteilt. Zum einen, weil dadurch das Niveau des Skilllevels der Mitglieder und der... -
fschauer replied to the thread PVE 9.2 OCI data disk always deleted (bug or working as intended?).In the delete dialog of the Web UI there is a warning saying "Referenced disks will always be destroyed.". So this is expected behavior. Did the container config still reference the disk? Note that detaching a disk still references it as unused... -
drwadu replied to the thread Question about Proxmox Cluster Resource Scheduling.one thing to keep in mind about what causes imbalance and why migrations might not be effective is that non-HA-managed VMs contribute to imbalance too, but other than HA-managed resources they cannot be moved around to reduce imbalance your... -
66equj5 replied to the thread [TUTORIAL] Proxmox VE auf Raspberry 5.Brandon Lee hat zwei Varianten ausprobiert: https://www.virtualizationhowto.com/2026/08/install-proxmox-arm64-on-a-raspberry-pi-5-this-weekend/...
-
EEl_Rapha replied to the thread Potential Greylisting issue.Hi, once again, thank you for your help, it's appreciate. 1) Ok 2) Ok 3) No, definitely no. I took time to re-read the documentation and explore my logs. I understand that: laposte.net never retry to send email! The second attempt is another...
-
fireon replied to the thread USB-Festplatten automatisch einbinden, formatieren und per PBS-Pull-Sync befüllen – wie mit beliebigen Platten umsetzen?.https://forum.proxmox.com/threads/removable-datastore.185084/#post-861981 -
fireon reacted to proxuser77's post in the thread Proxmox Cluster und mDNS von Brother Netzwerkdruckern with Like.
Ich sehe drei Möglichkeiten: 1. VLAN-fähiger Switch und Router, 2. separate physische NICs in den PVEs und dann via separatem Dumb Switch miteinander verdrahten und darüber Corosync laufen lassen. 3. Nicht vom Handy aus drucken. Wenn 1 oder 2...
-
LLeonid Kanareykin reacted to robertlukan's post in the thread [Automation] Mass migration tool for MS Win11/Server with Like.
Hi everyone, Built(with Cursor) this little migration helper to make VMware -> Proxmox moves less painful, mainly for Windows 11 VDI batches (but it works for Windows Server guests too). The main goal is controlled parallel imports, so you can...
