Latest activity
-
TBefore chasing PBS or VirtIO further: please explain the storage layout. ZFS on top of hardware RAID is a major architectural concern here.
-
TWhen you perform a backup with PBS, PVE/QEMU integrates the backup operation into the VM's I/O path. Data that is being modified while the backup is running has to be coordinated with the backup process. Depending on the storage, network, PBS...
-
TTmanok reacted to t.lamprecht's post in the thread Proxmox Virtual Environment 9.2 available! with
Like.
We are excited to announce the release of Proxmox Virtual Environment 9.2. This release focuses heavily on platform refinement, stability, and core optimization. Proxmox VE 9.2 is built on the robust Debian 13.5 "Trixie" and ships with Linux... -
TTmanok reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
TTmanok posted the thread EVPN + VXLAN Port Forwarding to a virtual DMZ in Proxmox VE: Networking and Firewall.Hi Everyone! Very very very long time since I've written a real post on here, but it's nice to be back, and I even have a blog now, what do you know? Anyway, I'm deploying a new PVE environment on a flat layer 2 network with no VLAN ability...
-
KKingneutron reacted to fschauer's post in the thread I know about bindmounts - is there a way to mount an SMB/CIFS share in multiple containers with different credentials for each? with Like.
There is a way. Under Container -> Options -> Features -> enable FUSE. Install rclone and fuse3 in the container. Run rclone config and setup an SMB remote. Mount it where needed with rclone mount ... You can setup a service in the container to...
-
KKingneutron reacted to MacRimi's post in the thread Anyone using ProxMenuX for host backup? with Like.
In ProxMenux, encryption is opt-in. The first host backup asks "Do you want to encrypt this backup?" — pick No and no keyfile is generated. If you say Yes, ProxMenux walks you through this: Keyfile source— two options: Generate a new one —...
-
GGarrick posted the thread [SOLVED] Help - Upgrade PVE 8 to 9, network keeps needing manual restart on boot in Proxmox VE: Networking and Firewall.Hello! I recently upgraded PVE 8 to 9 on my MacbookPro (Mid-2018) and need help debugging a networking issue. Network fails to start up on boot. Running systemctl restart networking.service manually gets things going again. I've masked...
-
Sshodan replied to the thread online migrate failure - block job (mirror) error: Source and target image have different sizes.Hi, This is the top google thread for "Source and target image have different sizes" While the original question is a ZFS issue, I suspect most people hitting this thread have my issue. Which happens when you try to live-clone a VM with a...
-
-
Gi have chrome os flex running inside proxmox (8.3.3) for a long time now. works pretty decent especially due to the "VirGL" GPU. I cannot remember if i did anything special during installation or something special to the UEFI setup, but i...
-
Mmrcowden replied to the thread Problem After Importing NIOS (Infoblox) QCOW2 to Proxmox VE.You don't need to use the SATA or IDE disk, or serial zero, or activated EFO. This problem usually happens because the VM requires 2 NICs instead of the default of 1. Add a second NIC and it should work. You don't need to configure the second...
-
VictorSTS replied to the thread SQL Server 2022 database corruption.That's good news, but remember that you are using an unsupported storage stack that will sooner or later give you some issue that no one will be willing to investigate / fix. Take your time to rebuild your storage to a proper ZFS setup, which... -
Sshodan reacted to fireon's post in the thread How to disable Secure Boot easily for iPXE when you get NBP file downloaded successfully / failed to load Boot / Access Denied with Like.
To boot via PXE, either the PXE server must support Secure Boot (which you don't want to set up), or you can choose disable Secure Boot when creating the VM by disabling it as follows:
-
Sshodan replied to the thread How to disable Secure Boot easily for iPXE when you get NBP file downloaded successfully / failed to load Boot / Access Denied.Thanks !
-
Ppvpaulo posted the thread Intel E810 / ICE / IRDMA HMC Error causing Corosync link loss and node reboots – Proxmox VE 7.3 in Proxmox VE: Installation and configuration.Hello, I have a 6-node Proxmox VE cluster running HA and Ceph, using Intel E810-XXV network adapters. I am experiencing recurring node reboots on some of the nodes, and based on the logs, I suspect the issue may be related to the Intel E810 /...
-
Rrhs reacted to fiona's post in the thread Proxmox 9 CPU/IO starved when doing a restore from PBS with Like.
Hi, a similar issue was also reported in our enterprise support and investigated by our support engineers. We suspect that the issue is related to the pbs-restore process using the host page cache and filling it up for ZFS and are currently...
-
JJanWerner reacted to toffer84's post in the thread Proxmox Cluster und mDNS von Brother Netzwerkdruckern with Like.
Hallo zusammen, nach ich meinen Cluster im Homelab aus 2 PVE Host und einem QDevice (Raspi) nun seit ca. 3 Wochen gut nutzen kann, ist folgendes im Netzwerk aufgetreten: 2 Brother Netzwerkdrucker machen Probleme mit ihren Druckaufträgen und...
-
Mmmurphy reacted to SInisterPisces's post in the thread [SOLVED] Correct Way to Install Proxmox Kernel Headers and Related Support Files? with Like.
Thanks! # apt show proxmox-default-headers Package: proxmox-default-headers Version: 2.0.0 Priority: optional Section: admin Source: proxmox-kernel-meta Maintainer: Proxmox Support Team <support@proxmox.com> Installed-Size: 8,192 B Provides...
-
JHi, This thread is the top thread for google search proxmox how to change vmid For some reason I wanted to change the VMID of some VMs and was frustrated to find it's not easy. I also figured out while I'm at it, there's a bunch of other...
-
Mmeyergru replied to the thread Snapshots cause console error: Marking clocksource 'tsc' as unstable because the skew is too large.I think I may have hit the same bug - and for me, it causes actual trouble: https://bugzilla.proxmox.com/show_bug.cgi?id=7935
