Latest activity
-
Sshodan reacted to fireon's post in the thread How to disable Secure Boot easily for iPXE when you get NBP file downloaded successfully / failed to load Boot / Access Denied with
Like.
To boot via PXE, either the PXE server must support Secure Boot (which you don't want to set up), or you can choose disable Secure Boot when creating the VM by disabling it as follows: -
Sshodan replied to the thread How to disable Secure Boot easily for iPXE when you get NBP file downloaded successfully / failed to load Boot / Access Denied.Thanks !
-
Ppvpaulo posted the thread Intel E810 / ICE / IRDMA HMC Error causing Corosync link loss and node reboots – Proxmox VE 7.3 in Proxmox VE: Installation and configuration.Hello, I have a 6-node Proxmox VE cluster running HA and Ceph, using Intel E810-XXV network adapters. I am experiencing recurring node reboots on some of the nodes, and based on the logs, I suspect the issue may be related to the Intel E810 /...
-
Rrhs reacted to fiona's post in the thread Proxmox 9 CPU/IO starved when doing a restore from PBS with Like.
Hi, a similar issue was also reported in our enterprise support and investigated by our support engineers. We suspect that the issue is related to the pbs-restore process using the host page cache and filling it up for ZFS and are currently...
-
JJanWerner reacted to toffer84's post in the thread Proxmox Cluster und mDNS von Brother Netzwerkdruckern with Like.
Hallo zusammen, nach ich meinen Cluster im Homelab aus 2 PVE Host und einem QDevice (Raspi) nun seit ca. 3 Wochen gut nutzen kann, ist folgendes im Netzwerk aufgetreten: 2 Brother Netzwerkdrucker machen Probleme mit ihren Druckaufträgen und...
-
Mmmurphy reacted to SInisterPisces's post in the thread [SOLVED] Correct Way to Install Proxmox Kernel Headers and Related Support Files? with Like.
Thanks! # apt show proxmox-default-headers Package: proxmox-default-headers Version: 2.0.0 Priority: optional Section: admin Source: proxmox-kernel-meta Maintainer: Proxmox Support Team <support@proxmox.com> Installed-Size: 8,192 B Provides...
-
JHi, This thread is the top thread for google search proxmox how to change vmid For some reason I wanted to change the VMID of some VMs and was frustrated to find it's not easy. I also figured out while I'm at it, there's a bunch of other...
-
Mmeyergru replied to the thread Snapshots cause console error: Marking clocksource 'tsc' as unstable because the skew is too large.I think I may have hit the same bug - and for me, it causes actual trouble: https://bugzilla.proxmox.com/show_bug.cgi?id=7935
-
SSpiceGuy posted the thread Need the path for logs files for a container. in Proxmox VE: Installation and configuration.I'm trying to update a container on my PVE 9.2.10 and it seems that the update goes perfectly when I run "update" from the container's console. No error are seen in the console. When I try to access the container from my browser it won't open. I...
-
The Administration Guide claims: However, after installing Proxmox VE (9.2 in a VM) on BTRFS, I noticed and confirmed that it also uses systemd-boot when using EFI without secure boot. Maybe someone can please correct this? Are there any... -
GGMBauer reacted to UdoB's post in the thread Proxmox Cluster und mDNS von Brother Netzwerkdruckern with Like.
Nein, ich nicht - ich habe solche Geräte nicht ;-) Netztrennung. "Komische" Dienste und Corosync+Adminzugang zu den PVE würde ich immer trennen.
-
CCutthroat replied to the thread Enabling VLAN Aware on a bridge makes the untagged management interface unavailable.Apply this. There are some quirks with this card. You need to limit the number vlans you are going to use and use a post-up config. You might have to change the pci bus below to match your setup. Had similar issues. Below is an example. iface...
-
Mmmurphy posted the thread Proxmox VE hangs sometimes when running nvidia-smi in VM in Proxmox VE: Installation and configuration.I've created a VM running Debian 10 and passing through a Nvidia GPU (Tesla K80). After installing the Nvidia v470 drivers I attempted to run the ```nvidia-smi``` command which should show info about the graphics card, however it caused the host...
-
MMarroniJohny replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.Ist dir irgendwie langweilig? Oder willst Du irgendwie die Welt vor böserem beschützen, wie dein Freund da oben, der mich für nicht geschäftsfähig hält? Gute Güte. Ist ja schön, dass Du was gegen AI und mich persönlich hast. Vielleicht solltest...
-
MMarroniJohny reacted to TErxleben's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
War doch klar. Du hast ja Claude.
-
TTErxleben replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.War doch klar. Du hast ja Claude.
-
MMarroniJohny replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.Zum Glück bin ich weder auf dich noch deine Meinung angewiesen.
-
Mmbarnickle posted the thread Noob question about OVF import and PVE disk allocations (/var/tmp/) and such in Proxmox VE: Installation and configuration.I am relatively new to Proxmox though I've worked with VMWare for decades. Before I go all in on Proxmox I'm doing some hands on testing in my home lab. I have a Beelink GTR9-Pro with 128GB RAM and a 2TB NVMe drive for storage. It should be...
-
TTErxleben replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.Das du Sonnenscheinchen mit irgendwem je Stress hattest, kann ich mir gar nicht vorstellen. Ich bedauere die Menschen, die du mit deinem völlig ahnungslos, per KI zusammengestoppelten Stuss, welchen du mittels KI "validierst", womöglich hinters...
-
JJohannes S reacted to Bu66as's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
Das mit "funktioniert in beide Richtungen" würd ich mir nochmal anschauen. MariaDB fängt dir bei Master-Master keine Konflikte ab, das letzte Write gewinnt und du merkst das nicht, weil kein Fehler kommt. Bei Bestelldaten driftet dir das dann...