Latest activity
-
Rraze posted the thread [SOLVED] TrueNAS Core to Scale Upgrade Path and HBA Installation Issues on Supermicro X11SSM/X11SSL in Proxmox VE: Installation and configuration.Board family: Supermicro X11SSM(-F) / X11SSL(-F), C236 chipset, LGA1151 (Xeon E3-1200 v5/v6, Core i3/Pentium/Celeron)Hypervisor: Proxmox VE 8.xGuest: TrueNAS CORE, full HBA controller passthrough (not per-disk passthrough)Card: Dell PERC H310...
-
KKeith Miller replied to the thread Install SSL cert for mail server.what are the ACME and Certificates options use for , and thanks for the quick response Keith
-
Pproxuser77 reacted to TErxleben's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with
Like.
Damit liegst du auch 100% richtig. Aber dem TO als "Macher" mit der Meinung "geht nicht, gibts nicht", brauchst du damit gar nicht kommen. -
JohnnieKF reacted to leesteken's post in the thread New PVE 9 node shows "unknown"/offline in GUI from PVE 7/8 nodes, despite cluster status/quorum being OK with Like.
The combination of 7.x with 9.x is untested and explicitly unsupported. Are the PVE 8 nodes updated to the latest 8.4.y? Otherwise it is untested and could be unsupported. PVE 8.x is (about to be) unsupported completely. I'm afraid your cluster... -
Ccelemine1gig replied to the thread Asus NUC14 Performance.No shame in that. Been there, done that. :-)
-
JohnnieKF replied to the thread Very high pvestatd CPU usage.The usual cause of elevated pvestatd CPU is storage polling, it stats every configured storage on each cycle. Check whether it's logging timeouts: journalctl -u pvestatd --since "7 days ago" | grep -iE 'timeout|unable|got status' And see what...
-
JohnnieKF replied to the thread How do I move a raw disk image from LVM-thin?.Check what's mounted: lsblk -f Then what your storages point at: cat /etc/pve/storage.cfg If the mirror is unmounted, your data is intact and this is a mount fix rather than a recovery job.
-
Thank you!
-
JohnnieKF reacted to TrevorW's post in the thread [SOLVED] Can't log in via GUI or connect via PDM with Like.
After restoring from Proxsave I was able to follow the instructions in https://pve.proxmox.com/pve-docs/chapter-pvecm.html#pvecm_separate_node_without_reinstall and recover the node from the failed cluster and connect it to PDM
-
JJohannes S reacted to Bu66as's post in the thread [SOLVED] Proxmox uefibios konfigurieren with Like.
Nee, du machst nichts falsch, das ist mit dem Standard-VGA-Display einfach so. Windows nimmt da den MS Basic Display Adapter und der übernimmt stumpf den Modus, den OVMF vorgibt, deswegen hast du im Gast nichts zur Auswahl. Wenn du das loswerden...
-
TTaylan reacted to golfleep's post in the thread [SOLVED] [pve8] kernel: EDID has corrupt header with Like.
Thanks, I had been previously using "drm.edid_firmware=edid/1280x1024.bin" in /etc/default/grub which then failed on upgrade to Proxmox 9 and generated additional errors. Removing and replacing with "video=HDMI-A-1:1920x1080@60e" followed by...
-
Ggolfleep replied to the thread [SOLVED] [pve8] kernel: EDID has corrupt header.Thanks, I had been previously using "drm.edid_firmware=edid/1280x1024.bin" in /etc/default/grub which then failed on upgrade to Proxmox 9 and generated additional errors. Removing and replacing with "video=HDMI-A-1:1920x1080@60e" followed by...
-
Ggolfleep reacted to Taylan's post in the thread [SOLVED] [pve8] kernel: EDID has corrupt header with Like.
I can't edit the first post, so here is the solution that works for me on proxmox 9, since I just updated to it. I just forced the mode in the kernel parameters according to this Arch-Wiki: I added "video=HDMI-A-1:1920x1080@60e" to the...
-
AIch würd das PVE jetzt nicht nochmal neu installieren. Der Installer nimmt die Platte die du auswählst, nicht automatisch die größte, und bei dir liegt PVE ja schon auf der NVMe. Passt so. ZFS zu LVM wechselst du auch nur per Neuinstallation...
-
TTErxleben reacted to proxuser77's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
Ich bin zwar kein Entwickler, aber meiner Meinung nach muss deine Software/Middleware das sicherstellen. Das Frontend darf dem Nutzer erst dann Feedback geben, wenn der Input tatsächlich in der Datenbank committed wurde und die entsprechenden...
-
TTErxleben replied to the thread Wasserdichtes System für kleine Multi Teant Anwendung.Damit liegst du auch 100% richtig. Aber dem TO als "Macher" mit der Meinung "geht nicht, gibts nicht", brauchst du damit gar nicht kommen.
-
BBigBulb posted the thread How do I move a raw disk image from LVM-thin? in Proxmox VE: Installation and configuration.I encountered an error trying to start one of my containers; the error had something to do with space shortage on the container which I didn't understand because there should've been enough space for that container and there weren't that much...
-
PPeter Neumaier replied to the thread Asus NUC14 Performance.Thank you!
-
PYou could use a VM instead of an LXC and pass the GPU directly to the VM [0]. This would mean the driver lives in the VM, pick a distro and kernel that has NVIDIA support and skip the host. You'll need IOMMU enabled and the dGPU in a usable IOMMU...
-
PPeter Neumaier replied to the thread Asus NUC14 Performance.Sorry, it was my first post - I promise to get better ...