Latest activity
-
cwt replied to the thread NVIDIA vGPU passthrough - PCI AER and ReBAR not working properly.ReBAR looks fine on the host: So I think we can rule out the BIOS/ReBAR configuration. Interesting thing though: the PCIe link is currently at 2.5 GT/s x16 while 32 GT/s x16 is supported. This may just be power management/idle behavior, but I... -
SSupaman replied to the thread Tägliches fehlschlagen der Backups wegen Timeout.Es gibt in dem Sinne keinen "Agent", und keinen Agent der ein Backup startet. Vereinfachte Darstellung: der PVE Backup Prozess liest die Datenblöcke vom PVE Storage, verschlüsselt diese ggf. und überträgt die Blöcke an den PBS. Für ein Backup...
-
Ccirivas posted the thread download.proxmox.com unreachable from Colombia (EHOSTUNREACH on na2.cdn node) in Proxmox VE: Installation and configuration.Hi, Since 2026-08-12 ~07:14 (local time, UTC-5) the Proxmox apt repositories (http://download.proxmox.com/debian/{pve,pbs,pbs-client}, bookworm) intermittently fail with "connect (113: No route to host)" from my host in Colombia (ISP ETB). DNS...
-
Wwinproof replied to the thread [0x08000800]: an uncorrected error caused a data fabric sync flood event.i try, thanks
-
JJohannes S replied to the thread Does changing "CT Change Detection Mode" from default to data speed up GC?.For a hdd-based pool adding two small ssds as special device mirror gives the best improvements. You will need to rewrite the data although. And it really needs to be a mirror, if the special device is gone, anything else on the pool is lost too
-
JJohannes S reacted to Impact's post in the thread Does changing "CT Change Detection Mode" from default to data speed up GC? with
Like.
You probably don't need to. Unlikely. It disables implicit atime but tools can still explicitly set it on files. PBS should do this and it also has safety checks. You could try to set a higher minimum ARC size and also play around with metadata... -
JJohannes S reacted to Impact's post in the thread Does changing "CT Change Detection Mode" from default to data speed up GC? with Like.
Is there a specific reason you disabled compression? AFAIK it will only help due to metadata compression, not hurt. Especially with HDDs. I'd try disabling atime and enabling compression again. Ideally you set it at the pool root and let the CT's...
-
JJohannes S reacted to Impact's post in the thread Does changing "CT Change Detection Mode" from default to data speed up GC? with Like.
I don't think this affects GC times. If you want faster backups try the metadata mode. If you want faster GCs we need to look at your pool and your settings. Let's start with lsblk -o+FSTYPE,LABEL,MODEL zpool status -vtLP zfs get all...
-
J@AlexanderB: prüfe, wenn alles fertig ist ob bei größeren Kopiervorgängen auf den Share nicht alle paar Sekunden bzw. Minuten der Traffic kurzzeitig runter geht. Wenn das so ist hast du irgendwo einen Flaschenhals. Am besten auf die IO Werte...
-
JJohannes S reacted to bbgeek17's post in the thread Solo business owner, can I use proxmox as an alternative to Windows 365? with Like.
Hi @galffing , I hope you don't mind me saying this, but based on the questions you've asked, it seems like W365 would be the best fit for your business needs. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
JJohannes S replied to the thread How to prevent node from hosting any VM/CT ?.OK then I would just have separate storage cluster. Existing Ceph clusters can be added as storage to ProxmoxVE after all and with such a setup no workload will ever be put on your storage nodes. One drawback I see though: Running computer and...
-
There are some logs of the interfaces going up/down but I don't remember if this happened when I tested it and/or plugged/unplugged the backup switch. Since I removed the backup link inside the bond, no more issues were found. From what I saw... -
JJohannes S reacted to jim_os's post in the thread KI basierte Dokumentation der Infrastruktur with Like.
Moin Du hast zwar das erwähnt, aber ich würde mir trotzdem sehr gut überlegen ob ich irgendeiner KI tatsächlich meine kompl. Proxmox-Konfig. und somit ja auch irgendwelche Zugangsdaten, offen legen würde. Und das nur weil mir irgendeine KI...
-
JJohannes S reacted to ITT's post in the thread [Community project] Proximo — an open-source, least-privilege MCP/API layer for managing PVE with an AI agent (feedback wanted) with Like.
I generally find this trend very dangerous. ("For they do not know what they are doing") Link to Wikipedia (Vibe-Coding) Link to "The Computer Chronicles - Artificial Intelligence (1984)" Edit: Link corrected / added
-
Bbroadway replied to the thread [Community project] Proximo — an open-source, least-privilege MCP/API layer for managing PVE with an AI agent (feedback wanted).And this is where everyone get's to choose - Oh Look that' person is not real, they are just VIBE CODING -- its very easy for you to dismiss something you're afraid of by labeling it something you understand - It's harder to qualify the person...
-
Jjeremy.lecour replied to the thread How to prevent node from hosting any VM/CT ?.The 2 nodes (that can run VMs) are not part of the Ceph cluster. When we designed the whole thing we thought that having a single PVE cluster would redure friction between the virtualization and the storage compared to having a 2 nodes cluster...
-
Zzyghom replied to the thread [0x08000800]: an uncorrected error caused a data fabric sync flood event.completely solved by reinstalling PVE from the scratch now it is: cat /proc/cmdline initrd=\EFI\proxmox\7.0.14-11-pve\initrd.img-7.0.14-11-pve root=ZFS=rpool/ROOT/pve-1 boot=zfs clocksource=tsc tsc=reliable uname -a Linux gorilla 7.0.14-11-pve...
-
Wqm config 107 agent: 1 boot: order=scsi0;ide2;net0 cores: 4 cpu: x86-64-v2-AES ide2: none,media=cdrom memory: 8192 meta: creation-qemu=11.0.0,ctime=1781881657 name: kuduh net0: virtio=BC:24:11:C3:E8:C7,bridge=vmbr0,firewall=1 numa: 0 ostype: l26...
-
LnxBil reacted to bbgeek17's post in the thread Solo business owner, can I use proxmox as an alternative to Windows 365? with Like.
Hi @galffing , I hope you don't mind me saying this, but based on the questions you've asked, it seems like W365 would be the best fit for your business needs. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -... -
Ppulipulichen reacted to Johannes S's post in the thread [SOLVED] Is there a way to enable HA by default for all new VMs in a cluster? with Like.
I would create a template without disc's and all settings, afterwards clone it for the new vm. For feature requests https://bugzilla.proxmox.com might have already one, otherwise feel free to create one.