Latest activity
-
UdoB replied to the thread Shared SSD for OS & datastore acceleration.Okay, that was a misunderstanding on my side... In this case I would install PBS only on all spindles, multiple mirrors preferred. Nice side effect: at the end all of them are bootable. When everything is up and running I would add the two SSD... -
TTrevorW replied to the thread Can't log in via GUI or connect via PDM.Thanks Johnnie - that's saying that the pve cluster filesystem isn't online - isn't that what pve-cluster.service starts? Although I did notice that I no longer have /etc/pve/priv/ that I can see root@Proxb2:~# journalctl -u pvedaemon -u...
-
Ttschmidt replied to the thread IPoIB with vmbr bridge.- PVE is built around ethernet, bridging other things wouldn't help. - Linux bridges are ethernet bridges, you cant simply add IB to them - I would use an vxlan overlay
-
PPatrik_V replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.root@berdaepve042:~# lsblk --ascii -M -o +HOTPLUG,ROTA,PHY-SEC,FSTYPE,MODEL,TRAN,WWN | grep nvme root@berdaepve042:~# lsblk --ascii -o NAME,MODEL,VENDOR,TRAN,ROTA,PHY-SEC,FSTYPE,SERIAL,WWN,SIZE NAME MODEL VENDOR TRAN ROTA PHY-SEC...
-
JohnnieKF replied to the thread Can't log in via GUI or connect via PDM.The 401 arriving before the TFA prompt means it's failing at the first stage, so this is a password/PAM or /etc/pve access problem, not your TFA token. Could be that pvedaemon and pveproxy are still holding the old pmxcfs mount you removed so... -
KKran replied to the thread FIREBAT S1 hard freezes (Intel N150).No, the problem is with ProxyMox itself. I just installed version 8.4, and the server has been running fine for 24 hours now. I'll try restoring some of my containers and monitor the system's stability. I'll add: I checked the hard drive and RAM...
-
Hhuganega replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Hello Galaxis, is the problem fixed with version 7.0.14-11?
-
TTrevorW posted the thread Can't log in via GUI or connect via PDM in Proxmox VE: Installation and configuration.After my main cluster node died (3 node cluster) I've decided to go the Datacentre Manager Route. I had TFA enabled on the main node and have been unable to login via GUI to the remaining nodes. One of them I just bit the bullet and reinstalled...
-
LHi, my guess is, that there is no file, but you have to edit the service entry in the registry (HKLM\System\CurrentControlSet\Services\QEMU-GA) and append -b <rpcs to block> to the ImagePath-Entry instead.
-
JohnnieKF replied to the thread [SOLVED] Disabling TLS 1.0 and 1.1./etc/pmg/templates doesn't exist by default. It's an override directory - the stock templates are read-only under /var/lib/pmg/templates/ and pmgconfig uses a file from /etc/pmg/templates/ only if you put one there. You need to create it...
-
Ppaulie_m replied to the thread Problem Booting Migrated SCO OpenServer 6 VM: “vfs_mountroot: cannot mount root”.I don't know if they will work for SCO OpenServer 6 (I suspect not) but I have created VirtIO drivers (SCSI Controller and NIC) for SCO OpenServer 5 so that you can install/migrate and use native Proxmox drivers. N.B. That I only have one...
-
Ccyruspy replied to the thread Shared SSD for OS & datastore acceleration.Yes, you are correct about the scenario. In a "let's design this and purchase this" scenario I would purchase dedicated flash storage for metadata. Is sharing the small boot disks what concerns me.
-
Ccyruspy replied to the thread Shared SSD for OS & datastore acceleration.I'm not sure I'm following. This machine is only for PBS, live data are in other computers.
-
66equj5 replied to the thread Probleme bei installation von Openmediavault.Also gut: spricht gegen ipv6. :p
-
Jj.theisen replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.Could you maybe run the following command on the affected server? lsblk --ascii -M -o +HOTPLUG,ROTA,PHY-SEC,FSTYPE,MODEL,TRAN,WWN | grep nvme It will give us some additional information on the used drives since HPE just sells SSDs from different...
-
HCan you please link the documentation article/part you have in mind? RTFM alone does not help anyone...
-
Aaszczupal replied to the thread [SOLVED] Disabling TLS 1.0 and 1.1.Hi , I would like to ask this question once again We using PMG version 9.1.1 based on debian 13.6 I want to disable TLS 1.0/1.1 access via SMTP . But I do NOT have directory "/etc/pmg/templates" :( Of course , i found "/etc/postfix/main.cf" ...
-
Kkrisshurley replied to the thread LVM Snapshot-as-Volume-Chain: Newly created qcow2 image reuses old guest data after VM deletion.Thanks for the link, I really appreciate it. I hadn't come across that KB article before, and it helped me better understand what I'm seeing in my lab. It looks like my test results are consistent with what they describe, so that clears up a...
-
Hhigh_performer replied to the thread Mehrere Datastores auf EIN Tape sichern.Tage später - habe einiges probiert - jetzt wirds lang Natürlich — hier ist die anonymisierte und etwas gestraffte Fassung. Ich habe ersetzt: Zwei Tape-Backup-Jobs mit einem Standalone-Laufwerk: neues Media Set zwischen den Jobs Hallo...
-
Ppeety replied to the thread Arc Pro B60 (Battlemage) PCIe link trains to Gen1 x1 under xe driver — healthy at BIOS POST and on other hardware.Hi dcsapak, Thank you for the hints. Totally missed that. Yesterday I set aspm to off in proxmox grub and also set the PCIe to Gen3x8 in Bios. to avoid negotiation issues. Bios does show correct training with (as capability allows in my case)...
