Latest activity
-
TTrevorW posted the thread [SOLVED] Can't log in via GUI or connect via PDM in Proxmox VE: Installation and configuration.After my main cluster node died (3 node cluster) I've decided to go the Datacentre Manager Route. I had TFA enabled on the main node and have been unable to login via GUI to the remaining nodes. One of them I just bit the bullet and reinstalled...
-
LHi, my guess is, that there is no file, but you have to edit the service entry in the registry (HKLM\System\CurrentControlSet\Services\QEMU-GA) and append -b <rpcs to block> to the ImagePath-Entry instead.
-
JohnnieKF replied to the thread [SOLVED] Disabling TLS 1.0 and 1.1./etc/pmg/templates doesn't exist by default. It's an override directory - the stock templates are read-only under /var/lib/pmg/templates/ and pmgconfig uses a file from /etc/pmg/templates/ only if you put one there. You need to create it... -
Ppaulie_m replied to the thread Problem Booting Migrated SCO OpenServer 6 VM: “vfs_mountroot: cannot mount root”.I don't know if they will work for SCO OpenServer 6 (I suspect not) but I have created VirtIO drivers (SCSI Controller and NIC) for SCO OpenServer 5 so that you can install/migrate and use native Proxmox drivers. N.B. That I only have one...
-
Ccyruspy replied to the thread Shared SSD for OS & datastore acceleration.Yes, you are correct about the scenario. In a "let's design this and purchase this" scenario I would purchase dedicated flash storage for metadata. Is sharing the small boot disks what concerns me.
-
Ccyruspy replied to the thread Shared SSD for OS & datastore acceleration.I'm not sure I'm following. This machine is only for PBS, live data are in other computers.
-
66equj5 replied to the thread Probleme bei installation von Openmediavault.Also gut: spricht gegen ipv6. :p
-
j.theisen replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.Could you maybe run the following command on the affected server? lsblk --ascii -M -o +HOTPLUG,ROTA,PHY-SEC,FSTYPE,MODEL,TRAN,WWN | grep nvme It will give us some additional information on the used drives since HPE just sells SSDs from different... -
HCan you please link the documentation article/part you have in mind? RTFM alone does not help anyone...
-
Aaszczupal replied to the thread [SOLVED] Disabling TLS 1.0 and 1.1.Hi , I would like to ask this question once again We using PMG version 9.1.1 based on debian 13.6 I want to disable TLS 1.0/1.1 access via SMTP . But I do NOT have directory "/etc/pmg/templates" :( Of course , i found "/etc/postfix/main.cf" ...
-
Kkrisshurley replied to the thread LVM Snapshot-as-Volume-Chain: Newly created qcow2 image reuses old guest data after VM deletion.Thanks for the link, I really appreciate it. I hadn't come across that KB article before, and it helped me better understand what I'm seeing in my lab. It looks like my test results are consistent with what they describe, so that clears up a...
-
Hhigh_performer replied to the thread Mehrere Datastores auf EIN Tape sichern.Tage später - habe einiges probiert - jetzt wirds lang Natürlich — hier ist die anonymisierte und etwas gestraffte Fassung. Ich habe ersetzt: Zwei Tape-Backup-Jobs mit einem Standalone-Laufwerk: neues Media Set zwischen den Jobs Hallo...
-
Ppeety replied to the thread Arc Pro B60 (Battlemage) PCIe link trains to Gen1 x1 under xe driver — healthy at BIOS POST and on other hardware.Hi dcsapak, Thank you for the hints. Totally missed that. Yesterday I set aspm to off in proxmox grub and also set the PCIe to Gen3x8 in Bios. to avoid negotiation issues. Bios does show correct training with (as capability allows in my case)...
-
RDer Punkt mit dem Pull-Sync ist so definitiv wertvoll. Je nach Umgebung würde ich prüfen, wie das Adminkonzept für den PBS ist. Theoretisch gehört da eine dedizierte Adminworkstation dazu. Damit die letzte Bastion nicht von den gleichen Kisten...
-
shanreich replied to the thread List of aliases and where they are applied to..You can find the descriptions here in the documentation [1]. There are also auto-generated IPSets for SDN, if you're using that [2] [1] https://pve.proxmox.com/pve-docs/pve-admin-guide.html#pve_firewall_ip_aliases [2]... -
66equj5 replied to the thread Grundsatz für Shared Storage.Ja genau, und darüber hinaus schon gar nicht die mit durchgereichten Hard Disk, finde ich. Na daß niemand auf die Idee kommt, in einer VM Smartwerte der Disks (im Host) sehen zu können. Schon lieber nicht. :D
-
JWhat is the speed and latency between the two locations? Hopefully 10 Gbit or higher? I could see this being very slow in several cases since at least 1/3 of all I/O is copied to the other data center. 4 nodes is more than 3 but you may want...
-
JJohannes S reacted to Francois Baillargeon's post in the thread Proxmox + Ceph across 2 datacenters with
Like.
Adding to @SteveITS bandwith is indeed important, if you can get to 25 or even 100gigs between sites.. You have to keep in mind that say, in RF4, each written block gets written to 4 places for safecopying, that's a lot -
JJohannes S reacted to proxuser77's post in the thread [SOLVED] How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage? with Like.
Just a quick note regarding the Docker in LXC topic. Jellyfin also offers Debian and Ubuntu repositories: https://jellyfin.org/docs/general/installation/advanced/manual#official-linux-repository-manual They even provide a script that adds the...
-
MMusikJunk reacted to lama2176's post in the thread 7.0.14-7 kernel breaks PCI link training with Like.
I seem to have a potentially related regression on a different platform, with the same kernel boundary. Hardware: QDNV01 appliance/mainboard Intel Atom C3558 (Denverton), 4 cores AMI BIOS 5.13, dated 2024-02-21 UEFI boot Proxmox VE 9.2...