Latest activity
-
Francois Baillargeon reacted to SuBun7's post in the thread [SOLVED] /etc/network/interfaces Permission Denied after Hardware Change with
Like.
After moving my HDD with my ProxMox installation to a new computer - some hardware in the previous one gave out - trying to access '/etc/network/interfaces' by any means shows the message "Permission Denied". I'm not sure why this is happening... -
Francois Baillargeon replied to the thread Intel I225-V igc NETDEV WATCHDOG/reset loop on 7.0 kernels; stable on 6.17.That smells like this https://bugzilla.proxmox.com/show_bug.cgi?id=6273 Unfortunately it required a Kernel regression
-
VvPro replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.Had exactly the same issues with some HPE DL380 Gen 11 and MR-416i-o, never figured out how to address this issue. Put MRs from JBOD to RAID and set up the RAID. Use the RAID-Volume for "ZFS single disk". ZFS sees the MR RAID as a physical disk...
-
Francois Baillargeon replied to the thread unifi enviroment native + tagged on the server port.Hey Johannes, yes set it as id 1 if now it will behave as a trunk port. I used that before to make virtual OPNSense boxes where trunking was wanted. Hope thah helps!
-
Francois Baillargeon replied to the thread systemd[1]: user@1002.service: Failed with result 'timeout'..Hmm, smells like bad ram Can you see anything in your ipmi ? See, it seems like it's expecting stuff from memory that returns a different value Aug 08 03:27:10 safe2025 kernel: list_add corruption. prev->next should be next (ffff8a80671bc818)...
-
Vviktorio reacted to UdoB's post in the thread [SOLVED] How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage? with Like.
You have not much experience with PVE, are using sub-optimal (not recommended) hardware and are starting with "Docker in LXC". This lands you immediately inside a battle field. That combination means you are piling up multiple problem areas from...
-
Francois Baillargeon replied to the thread Proxmox + Ceph across 2 datacenters.I agree with the others that this is a setup with many caveats and has high disk consumption (due to the requirement of having rf4) Also this sounds like Corosync will be over shared media , so make sure your QoS is tight accordingly
-
TTErxleben replied to the thread Grundsatz für Shared Storage.Das ist doch viel zu verkompliziert. beim Anlegen einer VM nur daran denken, zwei virtuelle Disks anzulegen. Einmal 8GB fürs BS und eine in gewünschter Größe für die Daten. Wenn es um das Bluescreenproblem bei OMV geht, dann nach Hinweis von...
-
PSeit pve-manager 9.2.7 sieht man den Unterschied bei der Template-Auswahl. Ab Version 9.2.10 vom pve-manager kann man die unpassende Architektur gar nicht mehr auswählen. Also einfach mal updaten. :)
-
Bboisbleu replied to the thread Frischer LXC Container startet nicht.Wer das Enterprise Repository nutzt, steht aktuell auf 9.2.4.
-
Vviktorio reacted to ghedo's post in the thread serial console to VM hangs after extended time away and is unrevocerable except on reboot with Like.
same problem: px 9.x guest debian13 , xterm.js stop working after a while
-
PPatrik_V replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.There's so much evidence that I'm not making this up... That's why I'm asking if the 7.X kernels are already better in this regard?
-
PPatrik_V replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.root@berdaepve041:~# dmesg -T | tail -30 [Fri Jul 17 13:11:37 2026] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Fri Jul 17 13:11:37 2026] CR2: ff4443b3443ec000 CR3: 0000000ae8c3e006 CR4: 0000000000f73ef0 [Fri Jul 17 13:11:37 2026] PKRU...
-
PPatrik_V replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.root@berdaepve042:~# dmesg -T | tail -20 [Fri Jul 17 10:15:21 2026] ? __pfx_kthread+0x10/0x10 [Fri Jul 17 10:15:21 2026] ret_from_fork_asm+0x1a/0x30 [Fri Jul 17 10:15:21 2026] </TASK> [Fri Jul 17 10:15:21 2026] Modules linked in: tcp_diag...
-
PPatrik_V replied to the thread HPE MR416i-o & HPE MR408i-o Gen11/10.I found that old Log root@berdaepve042:~# ps aux | grep -E "zz-proxmox-boot|cp /boot|update-initramfs" | grep -v grep dmesg -T | tail -40 zpool status -v root 6319 0.0 0.0 2680 1968 pts/1 S+ 09:51 0:00 /bin/sh...
-
BSeit pve-manager 9.2.7 sieht man den Unterschied bei der Template-Auswahl. Ab Version 9.2.10 vom pve-manager kann man die unpassende Architektur gar nicht mehr auswählen. Also einfach mal updaten. :)
-
Since nobody picked up the issue, it is still not implemented and nobody is currently working on it. If you feel like this should be more important, add a comment to the Bugzilla issue. Thank you. -
JJohannes S reacted to leesteken's post in the thread [SOLVED] How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage? with Like.
Run a VM that provides a network file share. All things can be accomplished in the same way as you would do with multiple physical systems (except that you use VMs or containers). EDIT: TurnkeyLinux provides VM/CTs that can run on Proxmox, see...
-
JJohannes S reacted to cwt's post in the thread [SOLVED] How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage? with Like.
Agree with @UdoB : a common distro (Debian/Ubuntu) with SSH access/server, docker base install and maybe portainer (or dockhand) for an easy entry or more simple management would the better choice. Your initial idea is like driving a formula one...
-
JJohannes S reacted to UdoB's post in the thread [SOLVED] How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage? with Like.
You have not much experience with PVE, are using sub-optimal (not recommended) hardware and are starting with "Docker in LXC". This lands you immediately inside a battle field. That combination means you are piling up multiple problem areas from...