Latest activity
-
UdoB replied to the thread How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage?.Okay. Unfortunately I cannot answer reliably as I do not have Jellyfin in a container. But... I would expect "mount points" to supply the required tooling: https://pve.proxmox.com/pve-docs/chapter-pct.html#pct_mount_points -
KkosmicUser replied to the thread How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage?.I understand that my setup is sub-optimal. For the moment though, this is still the question I am asking: It's okay if it's not possible, or ineffective; I just would like to know.
-
This has been updated. Thanks for pointing it out!
-
This page links to an outdated admin guide. The online docs have it right.
-
As @gurubert already mentioned, you will need one node in a 3rd location. Our Stretch Cluster guide has more details on how to get it up and running: https://pve.proxmox.com/wiki/Stretch_Cluster You will have to span up a layer2 network between... -
Kkrisshurley posted the thread LVM Snapshot-as-Volume-Chain: Newly created qcow2 image reuses old guest data after VM deletion in Proxmox VE: Installation and configuration.Hi, I believe I have found an issue with LVM storage using snapshot-as-volume-chain=1. I can reproduce it consistently on a fully updated Proxmox VE 9.2 installation on multiple cluster nodes. Environment Proxmox VE 9.2.10 qemu-server 9.2.5...
-
Bbl1mp replied to the thread Meinung Disaster Recovery Konzept.Der Punkt mit dem Pull-Sync ist so definitiv wertvoll. Je nach Umgebung würde ich prüfen, wie das Adminkonzept für den PBS ist. Theoretisch gehört da eine dedizierte Adminworkstation dazu. Damit die letzte Bastion nicht von den gleichen Kisten...
-
mkoeppl replied to the thread Wrong link to admin guide.This has been updated. Thanks for pointing it out! -
Ddmaahr posted the thread [SOLVED] S3 backend lowercases Access Key ID during SigV4 signing → SignatureDoesNotMatch (MinIO/RADOS) in Proxmox Backup: Installation and configuration.Reporting what appears to be a bug in the native S3 backend's SigV4 signing. Happy to provide additional logs or test a patch. Details below. Version: proxmox-backup-server 4.2.5-1 (also reproduced on 4.2.4-1) S3 provider: StorageFactory.io...
-
aaron replied to the thread Proxmox + Ceph across 2 datacenters.As @gurubert already mentioned, you will need one node in a 3rd location. Our Stretch Cluster guide has more details on how to get it up and running: https://pve.proxmox.com/wiki/Stretch_Cluster You will have to span up a layer2 network between... -
JYou can't re-encrypt; instead you can point new backups at a new key and keep the old ones archived until retention has pruned the last snapshot that used the old key. https://pbs.proxmox.com/docs/backup-client.html
-
Wwbk reacted to encryptedcurse's post in the thread Automatically mount nested datasets into LXC with
Like.
Funnily, I found a relevant Reddit thread a few minutes after this one: I can confirm the recursive mount works! However, I don't like the fact that Proxmox doesn't show these entries in the Resources tab like 'native' mounts. -
PPatrik_V posted the thread HPE MR416i-o & HPE MR408i-o Gen11/10 in Proxmox VE: Installation and configuration.Hi Team, I’d like to ask which kernel version after 6.18 works reliably with the HPE MR416i-o and HPE MR408i-o (different firmware versions almost always behave the same way). I have several ProLiant DL380 Gen11 and Gen10 servers... I use the...
-
Jj.theisen reacted to max1337's post in the thread [SOLVED] restore failed: detected chunk with wrong digest. / TASK ERROR: connection error: unexpected EOF with Like.
Hello everyone, as a final update on this: memtest found errors with the RAM of the system. I started to unplug modules until I figured out which module was the culprit and replaced it. Ran memtest again with the system fully configured and was...
-
Mmax1337 replied to the thread [SOLVED] restore failed: detected chunk with wrong digest. / TASK ERROR: connection error: unexpected EOF.Hello everyone, as a final update on this: memtest found errors with the RAM of the system. I started to unplug modules until I figured out which module was the culprit and replaced it. Ran memtest again with the system fully configured and was...
-
SS3v|\| replied to the thread Einstellungen Mail Filter (Block-/Welcomelist).Zur Info für andere: Wenn ich "com.ar" als Domain ausschließe, dann kommt "*@telecentro.com.ar" trotzdem durch. Hab mich jetzt nochmal mit Regular Expressions auseinandergesetzt und teste jetzt "^.+\.com\.ar$" - hoffe dass das so passt
-
Bbdr replied to the thread Increased latency on disks since 9.2.6 and associated 7.0.x kernel.Thanks for the reply @j.theisen I will test by rebooting into kernel 7.0.14-5 tomorrow morning to avoid disrupting any ongoing operations. And yes I'm using mdraid configured as RAID1 across 2 NVMe drives (/dev/nvme0n1 and /dev/nvme1n1). Details...
-
fiona replied to the thread [SOLVED] Windows 11 bootloop with kernel 7.0 (works with kernel 6.17).Hi, because the feature depends on kernel support and that was newly implemented between those kernel versions. Proxmox VE already removes the flags because of the issues you encountered, but the custom args take precedence. -
gurubert reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
gurubert replied to the thread Proxmox + Ceph across 2 datacenters.Basically you need three locations for automatic HA. Otherwise you will always have issues with split brain situations. Addendum: If there is no common layer 2 network available for the VM traffic you cannot migrate a VM from one location to the...