Latest activity
-
Stoiko Ivanov replied to the thread pmg8to9 FAIL: "Resolved node IP not configured or active" — expected for NAT'd gateway with public HELO hostname?.Where does the HELO/EHLO banner mention the IP-address for you? connecting to port 25, and issuing a EHLO testhost - to a PMG does not show any IP-addresses in the output coming from the server for me. EDIT: without testing this explicitly - I'd... -
Ggrass127 reacted to cwt's post in the thread Can NUMA node be a reason for ESXi vs Proxmox Performance differences? with
Like.
Regarding „NUMA or not“ please see also this thread: https://forum.proxmox.com/threads/multiple-cpu-motherboard-settings-for-windows-vms.169476/post-864964 -
Ggrass127 replied to the thread Can NUMA node be a reason for ESXi vs Proxmox Performance differences?.yep, I did had NUMA enabled in proxmox, the vmware logic was very nicely explained, from https://weestro.wordpress.com/2016/04/01/vsphere-design-for-numa-architecture-and-alignment/: When the NUMA topology is exposed to a guest VM, one of two...
-
Ggrass127 replied to the thread Can NUMA node be a reason for ESXi vs Proxmox Performance differences?.To provide more context: This is my lscpu data for both the machines: FieldProxmoxVMware Hostnamepmx_host-1vmw_host-1 Architecturex86_64x86_64 CPU op-mode(s)32-bit, 64-bit32-bit, 64-bit Address sizes46 bits physical, 48 bits virtual45...
-
j.theisen replied to the thread Increased latency on disks since 9.2.6 and associated 7.0.x kernel.Hi @bdr thanks for chiming in! Could you please also try if the problem is gone for you on kernel 7.0.14-5, as mentioned by @weppa. How is your storage / your disks configured? Are you also using mdraid? Best regards Jonas -
Generell ist es bei einer Migration auch nicht verkehrt sich einen Proxmox Partner an Bord zu holen, gerade wenn es um solche kritischen Anforderungen geht. Zum PBS: Die Wiederherstellung dauert natürlich immer so lange, wie sie halt dauert... -
JohnnieKF replied to the thread Change encryption key.You can't re-encrypt; instead you can point new backups at a new key and keep the old ones archived until retention has pruned the last snapshot that used the old key. https://pbs.proxmox.com/docs/backup-client.html -
SSim0n reacted to cwt's post in the thread Multiple-CPU motherboard - Settings for Windows VMs? with Like.
There is no universal “always use 1 socket and disable NUMA” recommendation. The correct configuration depends on the VM size and on the actual NUMA resource situation on the host. Your host has two physical NUMA nodes, one per CPU socket, each...
-
Aabhijithiaaxin posted the thread Proxmox + Ceph across 2 datacenters in Datacenter Manager: Installation and configuration.Hi all, We are planning to set up a 4-node Proxmox cluster with Ceph across 2 datacenters. Our setup will be: DC1: Node 1 and Node 2 DC2: Node 3 and Node 4 Node 1 and 2 are using one network range. Node 3 and 4 are using a different network...
-
JohnnieKF reacted to UdoB's post in the thread [SOLVED] How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage? with Like.
You have not much experience with PVE, are using sub-optimal (not recommended) hardware and are starting with "Docker in LXC". This lands you immediately inside a battle field. That combination means you are piling up multiple problem areas from...
-
BDiese TrueNAS wird, auch jetzt schon, zusätzlich noch auf eine weitere TrueNAS am gleichen Standort synchronisiert. Habe ich leider versäumt zu erwähnen. Vielen Dank für diesen Hinweis!
-
cwt reacted to Bu66as's post in the thread Wasserdichtes System für kleine Multi Teant Anwendung with Like.
Mit drei Nodes pro Standort bist du das QDevice-Thema los, das reicht fürs Quorum. Und ja, OEM-Geräte mit vPro sind völlig okay, wenn du eh drei Hosts hast. Der BMC ist hauptsächlich dafür da, dass du remote hart aus- und wieder einschalten... -
BDas hat wunderbar geklappt, vielen Dank!
-
cwt replied to the thread [SOLVED] How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage?.Agree with @UdoB : a common distro (Debian/Ubuntu) with SSH access/server, docker base install and maybe portainer (or dockhand) for an easy entry or more simple management would the better choice. Your initial idea is like driving a formula one...
-
cwt reacted to UdoB's post in the thread [SOLVED] How Do I Setup Jellyfin on Proxmox With Only 1 SSD for Storage? with Like.
You have not much experience with PVE, are using sub-optimal (not recommended) hardware and are starting with "Docker in LXC". This lands you immediately inside a battle field. That combination means you are piling up multiple problem areas from...
-
driley reacted to Klitschko's post in the thread Proxmox VE 9.2.6 - NFS storage is reported as inactive although the mount is accessible with Like.
Thanks for your help. I followed your suggestion and completely removed both old NFS storage definitions as well as all remaining/stale mount points under /mnt/pve. During further troubleshooting I found that the Proxmox host itself did not... -
IDen Punkt mit dem virtuellen Backupserver würd ich mitnehmen, aber von anderer Seite: wenn der PBS als VM auf dem TrueNAS läuft und TrueNAS gleichzeitig die VM-Disks hält, hängen Produktivdaten und Backup am selben Blech. Für den Gebäude-weg-Fall...
-
l.leahu-vladucu reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
Siehe https://forum.proxmox.com/threads/proxmox-virtual-environment-now-available-for-64-bit-arm-arm64.185527/ -
l.leahu-vladucu reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
l.leahu-vladucu reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...