Latest activity
-
Eebiss reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with
Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64... -
UI agree, iSCSI configuration is way over complicated in PVE. I have had to create step by step instructions for myself just to make sure I don't forget anything and do things in the right sequence. I did see in the roadmap though there is a...
-
Lluckman212 replied to the thread [BETA] Community Linux 7.1 kernel packages for Proxmox VE (7.1.0-1~beta1+1).Anyone got any stories (positive or negative) about this 7.1 kernel?
-
FFearless-Grape5584 posted the thread [TUTORIAL] PVE installed on top of an SDN VXLAN zone: terminal/Web UI stalls and "failed to set mtu to 1500" in Proxmox VE: Networking and Firewall.Posting this because I could not find the same case anywhere on the forum or via search, and the symptoms are easy to misread as something else. TL;DR — If you run a PVE instance whose uplink sits on a network with an MTU below 1500 (an SDN...
-
Ggyrex replied to the thread Intel pentium 8505 support.Has there been any progress on this? I just upgraded my N5105 mini PC running Proxmox to an Intel 8505 Mini PC and I'm getting these random lockups too. The screen and keyboard freeze completely. Edit: I disabled C-states in the BIOS and changed...
-
Oorkiniec replied to the thread Dell R760 High I/O Pressure with NFS, but No Measurable VM Impact.ok here is the results with nconnect=2 and read ahead set to 8192. I shutdown the 4 virtual machines on the server during this test. It seems the write phase didn't increase but the read phase basically maxed out the connection. The psi still was...
-
CCutthroat replied to the thread Enterprise iSCSI support in PVE.I agree, iSCSI configuration is way over complicated in PVE. I have had to create step by step instructions for myself just to make sure I don't forget anything and do things in the right sequence. I did see in the roadmap though there is a...
-
PPedanticDan posted the thread [SOLVED] Can't find Proxmox GUI in Proxmox VE: Installation and configuration.I've been running Home Assistant for while in a Promo VM. I decided I wanted to add another VM, but I can't find the GUI. The Proxmox machine is on Debian 13, pve-manager is 9.2, and teh machine is only listening on ports 22, 25, 85, 111, and...
-
JJohannes S reacted to paradox55's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
Hmm. Okay, so it works. And once the VM is booted fully, it seems stable. That said, it takes 5-10 "boot" attempts on the KVM/VPS to start it fully. It crashes the other 9 attempts. Unsure of why, as it doesnt appear to be logging any errors.
-
Pparadox55 replied to the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)!.Hmm. Okay, so it works. And once the VM is booted fully, it seems stable. That said, it takes 5-10 "boot" attempts on the KVM/VPS to start it fully. It crashes the other 9 attempts. Unsure of why, as it doesnt appear to be logging any errors.
-
JJohannes S reacted to paradox55's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
Works on the orange pi 5 plus with the edk2 UEFI firmware!
-
JJohannes S reacted to FingerlessGloves's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
See `Can I mix x86-64 and arm64 nodes in one cluster?` in the Q&A section, I assume to get around the different arch problem, you could use Affinity Rules to let VMs only HA between same architecture.
-
Ddbmtr replied to the thread [SOLVED] Noteable I/O Delay after upgrade to 9.1.14.I'd also been having the IO delay issue for two months and was finally able to fix it by unchecking the box next to “IO thread” in disk settings.
-
FFingerlessGloves reacted to paradox55's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
Works on the orange pi 5 plus with the edk2 UEFI firmware!
-
Pparadox55 replied to the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)!.Works on the orange pi 5 plus with the edk2 UEFI firmware!
-
Aaoxiangtianji posted the thread 7.0.14-7 kernel breaks PCI link training in Proxmox VE: Installation and configuration.I have a SK hynix PE4010 (HFS960GD0TEG-6410A, 894G) installed on a PCIe splitter card on an ASRock B450M Pro4-F. The splitter card has no switch chip; it relies on the motherboard's PCIe bifurcation. After updating from 7.0.2 to 7.0.14-8, PVE...
-
OOnslow replied to the thread can't access proxmox web GUI.Hi, @Melone145 From your post it's not clear in what circumstances the issue started. 1) Was it after an upgrade? If yes, what was the exact command to execute the upgrade? 2) Are there any unofficial add-ons in your PVE?
-
Mmarcio79 reacted to t.lamprecht's post in the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)! with Like.
We are excited to announce the first release of Proxmox Virtual Environment with official support for a second CPU architecture: 64-bit ARM (arm64/aarch64). Until now, Proxmox VE was available for x86-64 (amd64) only. Proxmox VE 9.2 for arm64...
-
FFingerlessGloves replied to the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)!.See `Can I mix x86-64 and arm64 nodes in one cluster?` in the Q&A section, I assume to get around the different arch problem, you could use Affinity Rules to let VMs only HA between same architecture.
-
Bblackpaw replied to the thread Proxmox Virtual Environment now available for 64-bit ARM (arm64)!.Very cool! Could you mix ARM and AMD nodes in a cluster?