Latest activity
-
Wwaltar reacted to JohnnieKF's post in the thread Hello, I need to change the IP of one host for corosync network link0. with
Like.
That's great — just to confirm, can you ping the other hosts from each VLAN? Assuming they're all communicating, they should be able to sync a new version of the Corosync config between the hosts [0]. If you update ring0_addr for Host 1 and... -
BBu66as reacted to Supaman's post in the thread BackupPilot - Desktop Backup Client für Proxmox Backup Server with Like.
Unabhängig von anderen Parametern wäre der PBS aus mehreren Gründen eine gute Wahl: - wenn PVE verdwendet wird, ist der PBS sowiso vorhanden - OpenSource bzw frei verfügbar - gute Deduplizierung, kleine Backups - Datensicherheit durch Client...
-
Wwaltar reacted to Alwin Antreich's post in the thread Hello, I need to change the IP of one host for corosync network link0. with Like.
A small adaption to this. With PVE 9.2 you can disarm HA [0] which closes all watchdogs, the resource.cfg move is not needed anymore. [0] https://pve.proxmox.com/pve-docs/pve-admin-guide.html#ha_manager_disarm
-
Gghandalf replied to the thread Netapp Storage Manager for Proxmox.Hi, thank you very much for reporting this new tool. I have always waited for a tool like this. Unfortunately, this tool is only running on Windows for what ever reason... -> I can't use it then, because we are not using Windows at all in our...
-
AAntonJ reacted to bbgeek17's post in the thread [TUTORIAL] What Replaces SRM and vSphere Replication on Proxmox? with Like.
Hi Everyone, Disaster recovery keeps coming up with folks moving off VMware, usually as some version of "what replaces SRM?" We've answered pieces of this in threads for years, so we finally sat down and wrote the whole thing up properly...
-
CCPO_Siemens replied to the thread Possible mismatch of reported and actual machine version.Any further ideas? Maybe from Proxmox staff? We only have a limited number of support tickets in our subscriptions and as this doesn't really affect the VMs I don't necessarily want to waste one for this but it is driving me a bit mad.
-
SSupaman replied to the thread BackupPilot - Desktop Backup Client für Proxmox Backup Server.Unabhängig von anderen Parametern wäre der PBS aus mehreren Gründen eine gute Wahl: - wenn PVE verdwendet wird, ist der PBS sowiso vorhanden - OpenSource bzw frei verfügbar - gute Deduplizierung, kleine Backups - Datensicherheit durch Client...
-
FFrank-75 replied to the thread VM Migration error.Thank's fabian, the migration works when VM with HDD QCOW2 format is ON. server A to server B and viceversa
-
Iinfraerik replied to the thread backup connect failed: command error: failed to set owner on s3 backend.OK - data dump as requested :) root@syn-pbs:~# proxmox-backup-manager version --verbose proxmox-backup 4.2.0 running kernel: 7.0.0-3-pve proxmox-backup-server 4.2.4-1 running version: 4.2.0...
-
Mm0z reacted to DamienDye's post in the thread [SOLVED] Feature Suggestion: Display "VLAN Raw Device" in Network Interface Overview with Like.
don't forget to mark this as solved.
-
JohnnieKF replied to the thread Hello, I need to change the IP of one host for corosync network link0..It should automatically pick up the changes without the need to restart corosync, but otherwise yes this is correct! -
JohnnieKF replied to the thread Hello, I need to change the IP of one host for corosync network link0..That's great — just to confirm, can you ping the other hosts from each VLAN? Assuming they're all communicating, they should be able to sync a new version of the Corosync config between the hosts [0]. If you update ring0_addr for Host 1 and...
-
HHristoY replied to the thread Hello, I need to change the IP of one host for corosync network link0..So Thank you to All and I prepared the action plan. Is it good ?: 1. Move all VM-s from server 1 to the other nodes. 2. Put the host server 1 into maintenance mode - ha-manager crm-command node-maintenance enable <server1> 3. ha-manager...
-
DamienDye replied to the thread [SOLVED] Feature Suggestion: Display "VLAN Raw Device" in Network Interface Overview.don't forget to mark this as solved. -
SSupaman replied to the thread BackupPilot - Desktop Backup Client für Proxmox Backup Server.Genau das ist der Punkt - es gibt weder einen offziellen noch einen inoffiziellen WIndows Client, der die Linux Features inkl. Encryption abbildet. Hier könntest Du der erste sein :)
-
Rrichardh_nz replied to the thread Intel 125U chipset unusable with proxmox or bad hardware? Constant system hangs/freezes - FIX: Pre-allocate iGPU memory using lgfx Gsm2 in BIOS.Thanks for your report. Bad hardware is also my conclusion. Trying to install 26.04 or 24.04 I couldn't get through GUI installer without hanging. I think the lack of GPU usage by proxmox hid the bad hardware that would have been instantly...
-
FFrank-75 replied to the thread VM Migration error.This log is another log. VM Server 2022 test Hyperv, TPM and EFI RAW, HDD QCOW2. RAW file migrated during process but not QCOW2. root@DL160gen9:~# qm config 123 agent: 1,fstrim_cloned_disks=1 balloon: 16384 bios: ovmf boot: order=ide0;scsi0;net0...
-
Mm0z reacted to DamienDye's post in the thread [SOLVED] Feature Suggestion: Display "VLAN Raw Device" in Network Interface Overview with Like.
like this you mean you can just enable it on the columns selector by hovering over a menu field and click the drop down
-
LOffline storage migration is not yet implemented for qcow2 on LVM: https://bugzilla.proxmox.com/show_bug.cgi?id=7554 You can use online migration instead.
-
HHristoY replied to the thread Hello, I need to change the IP of one host for corosync network link0..2 physical links shared the Management Network and Corosync Network.
-
