Latest activity
-
J_--James--_ replied to the thread ProxmoxVE and the shared root account for update/upgrades..You mean as in paying for the subscriptions? which every enterprise I manage have deployed PVE on does? Love how this comes back to "you want a feature then contribute" when that is not even the issue here. If you mean open a ticket, or file a...
-
gyptazy replied to the thread ProxmoxVE and the shared root account for update/upgrades..True. Then it's probably about starting to contribute :) -
Ssnullp replied to the thread PSA: ZFS performance bug on >=256k recordsize.If your system have lots of free RAM, but: 1. swap is full, 2. ARC lower than your expectation and 3. have an active dataset with >=256k recordsize. You might be affected by this bug. You can try stop the workload on the dataset to see if...
-
Iimpact83 reacted to yves.menge's post in the thread Lockout of Minisforum MS-A2! Brick Warning ! ; after 1.03 update of 9955hx with
Like.
I have the 9000 cpu on mine. -
Iimpact83 replied to the thread Lockout of Minisforum MS-A2! Brick Warning ! ; after 1.03 update of 9955hx.Thank you. got my MS-A2 9955hx downgraded with your file from 1.03 to 1.02 and PCIE-Passthrou works again unter proxmox. Many many thanks PS: i even reportet the problem in detail to minisforum.
-
Wwaltar replied to the thread Dell R760 High I/O Pressure with NFS, but No Measurable VM Impact.ZFS don't like nfs default export sync behavior which can be a bit alleviated with a slog device. Your 25Gb node1 still shows more I/O pressure as data would come faster as on the other and so normally you see the higher pressure there. Download...
-
Ssnullp posted the thread PSA: ZFS performance bug on >=256k recordsize in Proxmox VE: Installation and configuration.I have been seeing this issue for years and recently I finally figured it out: https://github.com/openzfs/zfs/issues/18893 Before this bug is fixed do not use recordsize that is >= 256k.
-
Ddimmispencer replied to the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host.Hello, Dave! Could you please share the current status?
-
Ddimmispencer reacted to daveanderson's post in the thread Broadcom BCM57504 (100G) bnxt_en TX timeout and NIC reset on Proxmox 8.1.5 — while BCM57414 (25G) works fine on same host with Like.
I see kernel 7.0.14-3-pve is out. Have been looking forward to a post 7.0.13 kernel to see if those bnxt_en fixes have any impact one way or the other. Have deployed it to a low criticality workload machine in this cluster, one that was...
-
Kkfietz replied to the thread PVE Management IP on a SDN VLAN.@DamienDye thanks for sharing your thoughts! I should have been clearer. I was only thinking about Simple, VLAN and QinQ zones here. My experience with the other zone types is limited, so I can't say much about VXLAN/EVPN. On the chicken and...
-
DamienDye replied to the thread Moving from 3-node full-mesh SDN to a 6-node using switches.how have you created the mesh by hand or using the inbuilt SDN open fabric mesh note proxmox openfabric is the ISIS protocol not ospf because it's possible to turn the mesh into a ring while it's running what you need to do is move one cable... -
DamienDye replied to the thread PVE Management IP on a SDN VLAN.am not sure this is the desired state you want a SDN network could be on any system supported as such you would be saying that having a system IP on a vTEP of vxnet should be supported too ? the SDN is meant to be an overlay network not the...
-
Yyves.menge replied to the thread Lockout of Minisforum MS-A2! Brick Warning ! ; after 1.03 update of 9955hx.I have the 9000 cpu on mine.
-
DamienDye replied to the thread Slow speed on second bridge.not much to go on here whats the logs say dmesg for example? what nic driver is it and whats it connected to in the system? are the nics on the same numa domain as the vCPU are you running EEE in the interface ? does it work faster without...
-
Iimpact83 replied to the thread Lockout of Minisforum MS-A2! Brick Warning ! ; after 1.03 update of 9955hx.is this (the link) for the 7000 or 9000 cpu?
-
UdoB replied to the thread [SOLVED] Possible to auto sync groups from OIDC on login; specifically remove groups from a user?.Great! You may tag this thread "Solved" by editing the first post and selecting the corresponding prefix for the title. -
DamienDye replied to the thread [SOLVED] Feature Suggestion: Display "VLAN Raw Device" in Network Interface Overview.like this you mean you can just enable it on the columns selector by hovering over a menu field and click the drop down
-
-
DamienDye replied to the thread Tailscale in OMV-VM drives me crazy....couple of questions 1) you open media vault is successfully connected and active on your tailnet ? 2) is tailscaled running on the omv system 3) do you see the tailscale0 interface on the omv with the tailscale ip once we have determined...
-
Following links are propably of interest: Smoother migration for WindowsVMs: https://forum.proxmox.com/threads/a-small-game-changer-for-windows-migration-to-proxmox.181582/ This is especially useful for migrations with minimal downtime as...
-
Oorkiniec posted the thread Dell R760 High I/O Pressure with NFS, but No Measurable VM Impact in Proxmox VE: Installation and configuration.I am seeing sustained I/O Pressure and I/O Delay on one Proxmox node only when its VM disks are stored on NFS. These are standalone nodes and are not in a cluster. Node 1: Proxmox VE 9.2.2, kernel 7.0.2-6-pve, Dell PowerEdge R760, dual Xeon Gold...
