There are some myths around SLOG, L2ARC and special device(s) in ZFS which always re-appear.
1) SLOG
A SLOG is a separate storage for the ZFS Intent Log (ZIL). Synchronous writes are protocolized and written back in the ZFS pool later. For...
I have a couple of proxmox VE hosts, running 9.2.4 with 7.0 kernel.
These systems are updated regularly (like once a month) with proper reboot
For the last update (9.2.4 to 9.2.6 - on the 7.0 kernel) I have something weird happening that trigger...
Super - Danke Euch allen - der erste Fehler wäre nun schon vermieden. Gefühlsmäßig hätte ich mich für ein RAID-Z2 entschieden.
@Falk R. : Du hast mich zwar schon zu einem Hardware PBS überzeugt - aber SSD only ist aktuell einfach zu teuer.
@UdoB...
Subject: PSA-2026-00035-1: missing privilege checks for container start-after-create/start-after-rollback
Advisory date: 2026-08-03
Packages: pve-container
Details:
When creating a container or triggering a rollback to a snapshot, the...
Subject: PSA-2026-00034-1: missing validation of comment field in firewall API
Advisory date: 2026-08-03
Packages: pve-firewall, proxmox-firewall
Details:
Missing validation of the comment field in the firewall API allowed an authenticated...
Udo und Falk haben zu special device, log device und SSDs versus HDDs und RAIDZ schon genug geschrieben.
Ergänzend folgender Blogpost von Jim Salter: https://jrs-s.net/2015/02/06/zfs-you-should-use-mirror-vdevs-not-raidz/
Seine Argumentation...
Wenn du im PBS wie produktiv empfohlen nur SSDs verwendest, dann kannst du auch mit RaidZ# arbeiten. Ich habe PBS mit All NVMe und RaidZ2 sowie einem kleinen NVMe Mirror als Special Device bei Kunden im Einsatz. Das läuft gut, aber mit HDDs...
Hi Team,
Is it possible to have an email as spam@domain.com and one as ham@domain.com. When users get spams in the mailbox they can forwrad it to that email and pmg will automatically block them. I tried to use bayes and it works sometimes then...
Did you figure out the root cause?
Same with me in a simpler architecture: upload large immich data (some videos) then crash the truenas VM. within same log here.
This issue can be reproduced easily.
```
Proxmox node syslog...
using pve 9.0.5 . 5 node ceph cluster. nodes have a mix of zfs and non zfs root/boot disks along with one large nvme formatted ext4 for vzdumps. we also use pbs .
i have a cronscript which we have used for years that checks this:
dmesg -T |...
IANAL but I think running the disk on the Ceph cluster is probably your easiest bet, that said, won't that run contraty to your wish of being separated?
Was mich mehr verwundet ist, dass, der OP ein ZFS Setup nutzt und nur einen Datenträger einsetzt.
Dann noch das Setup auf dem Promox BS mit jeweils nur einem Datenträger pro ZFS Pool.
Das macht keinen Sinn! Wo bleibt die Sicherheit?
Warum lese...
Udo und Falk haben zu special device, log device und SSDs versus HDDs und RAIDZ schon genug geschrieben.
Ergänzend folgender Blogpost von Jim Salter: https://jrs-s.net/2015/02/06/zfs-you-should-use-mirror-vdevs-not-raidz/
Seine Argumentation...
RaidZx reduziert die IOPS auf die einer einzelnen Spindel. Es liefert also - egal wie viele Festplatten in dem vdev enthalten sind und egal ob Z1/Z2/Z3 - immer die geringste Anzahl Operationen pro Sekunde.
"Auf keinen Fall" weil dies eben das...
Udo und Falk haben zu special device, log device und SSDs versus HDDs und RAIDZ schon genug geschrieben.
Ergänzend folgender Blogpost von Jim Salter: https://jrs-s.net/2015/02/06/zfs-you-should-use-mirror-vdevs-not-raidz/
Seine Argumentation...
Again, I understand that native support for GlusterFS has been removed (qemu removed it, so it really has very little to do with Proxmox itself).
But that still doesn't answer the question as to why the native GlusterFS client didn't support LXC...
Wenn du im PBS wie produktiv empfohlen nur SSDs verwendest, dann kannst du auch mit RaidZ# arbeiten. Ich habe PBS mit All NVMe und RaidZ2 sowie einem kleinen NVMe Mirror als Special Device bei Kunden im Einsatz. Das läuft gut, aber mit HDDs...
This will change as soon as the qemu version integraded in ProxmoxVE doesn't have gluster-support anymore. Since qemu deprecated it and announced that they will remove this feature at some point Proxmox developers removed it too...