Latest activity
-
Ffrankz replied to the thread Grub starts the old kernel.The ESP on sdb2 (UUID 0104‐CE60) is already the one managed by Proxmox, and the correct EFI entries (Boot0002 and Boot0004) already point to that partition.The problem was not a missing ESP or to be initialized, but simply that the firmware...
-
Rrulezz replied to the thread Faster VM moves between two nodes with node-local ZFS pools (per-blocksize storages).Hi, I still don't get an idea to have different names for different nodes. To me it doesn't add a thing to your tiering except for unnecessary complication. You write you need different blocksizes, well, that makes sense, but different names per...
-
Sstudioblackbird replied to the thread Kernel 6.17 - End of Support after July.I have a community membership which I don't expect it to provide the same amount of effort. Do i have access to open tickets with a paid continuity access membership?
-
GGMBauer replied to the thread Proxmox VE 9 installer fails on Dell PowerEdge T630 before installer UI, while Proxmox VE 8 and Debian 13.6 installer boot successfully-same hardware.The only safe way to test a 9 on that device is to disconnect the drives and connect one blank ssd for a quick installation. But for complete confidence you will have to restore your vms. Did you try...
-
Ggfngfn256 replied to the thread Grub starts the old kernel.Based on this output, it would appear that this is sdb2 on your mode (as shown by lsblk output in a previous post of yours). However sda2 (UUID 0104-11A4) does not appear managed by proxmox-boot-tool. What I would probably do: proxmox-boot-tool...
-
JJohannes S replied to the thread Ich möchte Proxmox neu aufsetzen - Was sollte ich verändern?.Nein, generell sollte man die HA einer Anwendung benutzen, ich sehe die HA-Features eines Hypervisors generell nur als Notbehelf, wenn das nicht anders geht. Denn: Die Entwickler einer Anwendung können auch deren Spezialfälle berücksichtigen, was...
-
Ddaanw replied to the thread Grub starts the old kernel.Don't change fstab. The ESP's you want your system to use for booting should be in /etc/kernel/proxmox-boot-uuids. proxmox-boot-tool refresh will update all included ESP's with the actual kernels.
-
JJohannes S replied to the thread Kernel 6.17 - End of Support after July.Do you happen to have a support subscription? Then your best way of action would be to file a support case for two reasons: You have actually a guarantee that somebody from the Proxmox team will help you to solve your problem instead of hoping...
-
Jjackydec replied to the thread Intel 125U chipset unusable with proxmox or bad hardware? Constant system hangs/freezes - FIX: Pre-allocate iGPU memory using lgfx Gsm2 in BIOS.So, the K15 (48gb ram 1tb ssd) arrived on tuesday. Didn't touch the bios, only to put in on 'Silent' mode to be energy efficient. installed 'vanilla' Proxmox on it. (network via wired connection & fixed ip address) installed Jellyfin as a...
-
JReiner Zufall: ich bin vor zwei Wochen bei einem simplen Test (auf einer potenten Hardware) mit OMV fundamental gescheitert. Ich habe einfach nicht begriffen, in welcher Reihenfolge ich im Web-Interface etwas tun muss, um ans Ziel zu gelangen...
-
Llonger replied to the thread Proxmox VE 9.1 installation process does not recognize keyboard and mouse.Cool, thanks for sharing
-
Ddaanw replied to the thread Proxmox VE 9 installer fails on Dell PowerEdge T630 before installer UI, while Proxmox VE 8 and Debian 13.6 installer boot successfully-same hardware.You can install Proxmox on the IDSDM of the Dell T630, but do not use this as a permanent solution because the SD cards will wear out quickly. New PVE9 install looks like nomodeset kernel parameter is needed indeed. Do you boot your working...
-
LLongbowbln posted the thread Neue Installation - im Netzwerk nicht erreibar in Proxmox VE (Deutsch/German).Hallo, habe den Proxmox Server neu installiert, dabei ist der mit dem Netzwerkkabel am Router verbunden. Ip: 192.168.20.150 Gaeway: 192.168.20.1 Die Installation hat auch es so übernommen, das alles eingestellt ist die IP! Die Interfaces...
-
WGC Job ran successfully. From 3 days gc run to 4 hours. This speed difference is insane.
-
Rrobertlukan posted the thread (Community tool) Windows template → clone + Sysprep customize on PVE in Proxmox VE: Installation and configuration.Hi, I built a small community project for something I kept missing after moving Windows workloads to Proxmox: take a golden-image template, clone it, and customize the guest (hostname, network, timezone/locale, workgroup or AD join) with Sysprep...
-
Llblaesius replied to the thread Problem mit TPM in Windows Server 2025.Ja genau, jedes weitere Sicherheitsupdate hat das gleiche TPM Problem ausgelöst. Kumulative Updates konnten wir installieren. Grüße, Luca
-
DGC Job ran successfully. From 3 days gc run to 4 hours. This speed difference is insane.
-
Jjoshiyamamoto replied to the thread Use ZFS Special vdev with Raid 5.GC Job ran successfully. From 3 days gc run to 4 hours. This speed difference is insane.
-
Ffredd24 reacted to Johannes S's post in the thread Proxmox cluster split after FritzBox Update with
Like.
If you want to learn or play around with clusters you could create them as vms on one of your sites :) Depending on your hardware only lxcs might work but that would still give you some insights how clustering, ceph, ha etc work even without... -
GGMBauer replied to the thread Proxmox VE 9 installer fails on Dell PowerEdge T630 before installer UI, while Proxmox VE 8 and Debian 13.6 installer boot successfully-same hardware.Proxmox doesnt work with SDs. VMware worked with SDs, Proxmox doesnt. Which SSDs/HDDs do you use in which configuration?