Latest activity
-
gurubert replied to the thread Grundsatz für Shared Storage.In einem solchen Szenario wäre ein NFS-Server direkt auf dem Proxmox die simpelste Lösung. Und dann die NFS-Exporte nach Bedarf in die VMs mounten. -
JJohannes S reacted to Onslow's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with
Like.
FWIW: "ZFS Fast Dedup for Proxmox VE 9.x: Technical Implementation Guide" https://klarasystems.com/articles/zfs-fast-dedup-for-proxmox-ve-9x/ -
JJohannes S reacted to IsThisThingOn's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
I thinkg this is en excellent read on why it might could be considered now. I stil think it is not a good idea. Why? Storage is cheap, performance is not. While it is faster, it still comes with a IMHO extreme performance penalty. The other...
-
DDocZoid replied to the thread [SOLVED] VLANS richtig einrichten.Ich möchte noch was zu dem Thema ergänzen, was ich nach etlichen Stunden Suche erst gefunden habe. Proxmox lief zunächst in einem Netzwerk ohne VLANs, erst später habe ich OPNSense auf eine VM installiert, Dabei war vmbr1 zunächst noch nicht VLAN...
-
BBu66as replied to the thread Fehler ZFS beim booten.Zum Boot-Problem: dein PVE-Root liegt auf einer anderen Platte, es hängt nur der Import vom kaputten Datenpool und blockiert damit den Boot. Beim Bootprompt hängst du an die Kernel-Cmdline systemd.unit=emergency.target dran, dann kommst du in...
-
Iivenae reacted to Bu66as's post in the thread [TUTORIAL] Backup RAW image oder ZFS_SEND -> restic with Like.
Cooles Projekt, sieht echt durchdacht aus. restic check verifiziert dir nur die restic-Chunks, ob der zfs-send-Stream danach auch sauber per zfs receive wieder zurückkommt, sagt dir das nicht. Ich würd regelmäßig echt mal einen Test-Restore in...
-
fba replied to the thread HA trouble with SDN.Hi, I would check that: the SDN zone isn't limited to specific nodes and the target node is excluded (s. /etc/pve/sdn/zones.cfg) there is no ha-rule for restricting the nodes for this vm and the strict setting being enabled. (s... -
Mmeyergru replied to the thread IPv6 DHCP in LXC.1. LXCs are usually configured via the network settings from the PVE definition. You do not have to set anything within the LXC itself, and even less so on the PVE host. 2. To rule out general network setup problems, I would try to test a Debian...
-
Ffrankz replied to the thread Grub starts the old kernel.root@pve:/etc/default# proxmox-boot-tool kernel list Manually selected kernels: None. Automatically selected kernels: 6.17.13-19-pve 7.0.14-4-pve 7.0.14-6-pve 7.0.6-2-pve root@pve:/etc/default#
-
Ddeviljindante replied to the thread Problems with PCIe passthrough with two identical devices.I used gemini to compile the kernel on the linux subsystem on win11 (so as not to compile it for hours on the proxmox host) and send it for installation on my proxmox host. Maybe the solution was somewhere here (how to do it), but it seems to me...
-
Ddeviljindante reacted to celemine1gig's post in the thread Problems with PCIe passthrough with two identical devices with Like.
I am really fscinated by all this AI craze. You do not need to ask patchrick84, or the AI for that matter. The required information is all in this thread. Reading and understanding is all that is required. The official Linux maintainer for the...
-
Iivenae replied to the thread Windows Server Boot-Problem.Aus genau dem Grund hab hebe ich meine Autosnapshot jetzt mindestens ein Windows-Update Intervall auf. Dann kann ich einen Monat zurück und die Daten manuell rüberziehen. Hatte das Thema letztens auch. Es war aber ein VDI Rechner ohne Daten, da...
-
BBu66as replied to the thread Windows Server Boot-Problem.Falk hat recht, offline reinschauen ist der richtige Weg. Häng die kaputte OS-Disk einfach als zweite Platte in die jetzt laufende VM und schau in Windows\System32\winevt\Logs (System-Log) und in die Update-Historie rund um den Ausfallzeitpunkt...
-
G_gabriel replied to the thread IPv6 DHCP in LXC.as VM within PVE or physical external ? is your Edge router have IPv6 ? IPv6 uses RA to get IPv6 prefix from router then generates its own IPv6 itself , it's not like IPv4 DHCP. BTW, /etc/sysctl.conf is no more used since Debian13, *.conf are in...
-
TTErxleben replied to the thread [LXC Problematik] Promox Virtual Environment 9.2.5 - LXC Container - Probleme nach Update oder Fehlbedienung.Da ich ja neugierig bin und hier noch 3 Basis-Debian-LXCs (8, 9. 10), lediglich ehemals als SQL-Hosts genutzt, rumlümmeln habe, habe ich die mal gestartet. v9 und v10 starten problemfrei. und sind zumindest im Netz erreichbar. Debian Jessie (v8)...
-
Ccelemine1gig replied to the thread Problems with PCIe passthrough with two identical devices.I am really fscinated by all this AI craze. You do not need to ask patchrick84, or the AI for that matter. The required information is all in this thread. Reading and understanding is all that is required. The official Linux maintainer for the...
-
Ddaanw replied to the thread Grub starts the old kernel.What does proxmox-boot-tool kernel list say?
-
UdoB reacted to Onslow's post in the thread ZFS dedup on a Proxmox host in 2026 — has fast dedup changed the recommendation? with Like.
FWIW: "ZFS Fast Dedup for Proxmox VE 9.x: Technical Implementation Guide" https://klarasystems.com/articles/zfs-fast-dedup-for-proxmox-ve-9x/ -
Uunsichtbarre reacted to coldcold's post in the thread Migrating pfSense from VMware to PVE with Like.
When moving pfsense from Vmware, the biggest hurdle isnt the disk its the network interface assignment. Before you shut down the VMware VM, take a note of the MAC addresses assigned to your WAN/LAN. When you create the VM in Proxmox, manually...
-
fireon reacted to eric420's post in the thread [BUG] TOTP window freezes sometimes when attempting to login and unable to click anything with Like.
For what it's worth, I am having the same problem. I am using Firefox and have the Bitwarden extension installed. It is usually helpful in auto-filling in the username, password, and TOTP but for some reason sometimes I will enter the username...