Latest activity
-
Kkocio replied to the thread [SOLVED] Zabbix ZFS storage size check.Thanks! I was using this tool, but it stopped working 2 years ago (after PVE 8.1 or so). Now it looks like it has been updated and works again with current version. Zabbix agent is a generic tool, it works with multiple filesystems and is enough...
-
SInisterPisces reacted to Deerom's post in the thread Tuxis launches free Proxmox Backup Server BETA service with
Like.
Hi @ all! Good news, we've re-opened the creation of free PBS datastores! You can order your datastore via https://www.tuxis.nl/en/proxmox-backup-server/ Performance has noticeably been improved thanks to the fixes that Proxmox-devs wrote for... -
SSchyGuy replied to the thread RTX Pro 2000 (Blackwell GB20x) passthrough — device fails FLR ("not ready 65535ms after FLR; giving up").Here is every relevant file I could think of.
-
WWe will re-evaluate it, but cannot make any promises. What we also look into periodically is reducing the attack surface in general, like we started rolling out some simple but relatively effective approach to block autoloading of various niche...
-
Bbroadway reacted to Tecnolobo's post in the thread Better way to idmap and control devices permissions in LCX with Like.
Hi. I think you reply at wrong post.
-
Bbroadway replied to the thread Proxmox 8.4.19 to 9.2.4 failure.Your issue is that GRUB (even the downgraded 2.06) isn't properly handling your mdadm RAID1 setup for /boot and EFI after the Proxmox 9 upgrade. It worked fine in PVE 8, but the upgrade messed up the automatic detection/config. The manual boot...
-
Bbroadway replied to the thread Better way to idmap and control devices permissions in LCX.Good catch that's what i get for trying to participate in multiple threads at same time.. thanks for keeping me straight. apologies for posting to yours.
-
KKLez replied to the thread Problems removing old Kernel 6.Thanks for all the tips, but after long tries with no success i ended up by re-installing my Proxmox Server and restored all the LXC and VMs from backups. Sorry, that i have not found another solution for the problem.
-
SSchyGuy posted the thread RTX Pro 2000 (Blackwell GB20x) passthrough — device fails FLR ("not ready 65535ms after FLR; giving up") in Proxmox VE: Installation and configuration.Hoping someone with a professional Blackwell card has cracked this. My failure looks related to the RTX 5080/#7374 threads but is a DIFFERENT stage — my device assigns fine and reaches the guest; it's the FLR reset that never completes. Host /...
-
Sspradovargas replied to the thread All Virtual Interfaces Disappeared after the Upgrade.Hi we had same problem today after adding a new interface under /etc/network/interfaces. All the VMs NIC tap itnerfaceds deatached from the physical bridge. We had to place qm set command manually and started working. but this is just workaround...
-
G_gabriel reacted to fmnamado's post in the thread Possible regression in PVE 9.2.x: unable to remove physical passthrough disks using "qm set --delete" with Like.
Hi, I think I may have found a regression in PVE 9.2.x regarding physical disk passthrough. Environment proxmox-ve: 9.2.0 pve-manager: 9.2.4 qemu-server: 9.2.0 pve-qemu-kvm: 11.0.2-1 For a long time I have been attaching and removing...
-
JJohannes S reacted to IsThisThingOn's post in the thread PBS hinter Apache2 Reverse Proxy with Like.
Genau darum würde es mich ernsthaft interessieren. Dank fixen IPs kannst du die Festen Regeln, bzgl Netzzonen IMHO viel eleganter und eventuell sogar sicherer umsetzen. Aber wenn du nicht willst, nehmen wir halt ein Bier zusammen :)
-
JAh verdammt, stimmt, der Fallstrick ist mir durchgerutscht. Der Protokollname ist 26 Zeichen lang, apache hat da intern ein hartes Limit von <16 für upgrade=. Mit dem vollen Namen kommst du nicht durch. Probier statt dem festen Namen mal...
-
JJohannes S reacted to IsThisThingOn's post in the thread PBS hinter Apache2 Reverse Proxy with Like.
Warum? Oder ganz doof gefragt, ist das wirklich, wirklich wirklich nötig? In Zeiten von kostenlosen statischen IPs (/48 oder immerhin /56 Präfix) sehe ich da wenig Gründe ;)
-
JJohannes S reacted to Tecnolobo's post in the thread Better way to idmap and control devices permissions in LCX with Like.
Hi. I think you reply at wrong post.
-
Ccrlt reacted to robertlukan's post in the thread VM processes stall when rebooting adjacent node with Like.
https://bugzilla.proxmox.com/show_bug.cgi?id=7827
-
Wwendellrodriguez replied to the thread Migration from VMware.Hi, my experience with VMware VM´s is first do a copy from the master image, from the copy move to Hyper-V temporal environment using StarWind (Freeware) when the VM is start up on Hyper-V, run MergeIDE file from Proxmox VE...
-
WTry http://redorescue.com/ Works 100% for me. And, first, remove vmware tools, if installed.!
-
WHi, If you are use mdraid for `/boot` I would suggest migrating or reinstalling a supported layout, e.g., ZFS. Because mdraid is not supported [0]. [0] https://pve.proxmox.com/wiki/Software_RAID
-
BBerndZ replied to the thread Upgrade von 6.3-2.Ok, das mit den Sicherungen habe ich mittlerweile hinbekommen, aber nur lokal gespeichert. Gespeichert wurde das Lokal mit der Endung .tar.zst Ist das richtig? Und wie kann ich die vom Proxmox auf meinen Rechner ziehen? Wenn ich das gelöst habe...