Latest activity
-
fireon reacted to guruevi's post in the thread Migrating VMs from Xen to Proxmox – Stuck in Initramfs with
Like.
There are tools like https://github.com/libguestfs/virt-v2v and StarWind V2V that can convert your Xen VM, load the kernel and drivers etc into a Xen image. The problem with Xen is that it uses a ‘special’ kernel that gets access (through a... -
TTecnolobo replied to the thread Better way to idmap and control devices permissions in LCX.I have tried to pass the /dev/input and the /dev/input/* and don't work, probably I have made some error, or these way don't allow to pass a full directory. Can you explain better how I can do it? Thanks.
-
shanreich replied to the thread No Network / Internet after Reboot!.Could you post a full journal of a boot where the problem occurred. If it happens every time, then the journal of the current boot should be sufficient: journalctl -b | gzip > journal.txt.gz -
Francois Baillargeon reacted to Robin_T's post in the thread [SOLVED] Can't see USB ethernet on "reboot" BUT PowerOFF/ON laptop can see USB in Proxmox with Like.
Merci my man. Upgraded the firmware (2018 last version) but same result. Since I have a working solution and laptop maybe to old to solve this issue, we'll close the case. Thanks for the help, really appreciate it! -
IITCowboy posted the thread No Network / Internet after Reboot! in Proxmox VE: Networking and Firewall.I recently upgraded from 8.x PVE to 9.x PVE and during the upgrade it failed (cant remember the error message) and it will not find internet on reboot. no apps will load and no services will install. I can get the network to boot manually using...
-
Jjacobrale replied to the thread [SOLVED] W: Couldn't identify type of root file system '/dev/pve/rootu/dev/pve/root' for fsck hook.Thanks!
-
Aalexskysilk replied to the thread [SOLVED] NVIDIA 580.x + Kernel 7.0 incompatibility on Trixie.I have 580.173 working fine. I dont use the apt packages as nvidia doesnt seem to care about Trixie support, but the NVIDIA*.run installer works without a hitch.
-
Aalexskysilk replied to the thread High Latency on a new HDD-disks (ceph).Latency in the 80-100 range is normal. Just means the drives are busy. are they currently rebalancing?
-
Ggfngfn256 replied to the thread Proxmox 8.4.19 to 9.2.4 failure.You probably could add those commands at the end of /etc/grub.d/40_custom & then run update-grub Note: I personally have never done this nor have any experience with it.
-
RRobin_T replied to the thread [SOLVED] Can't see USB ethernet on "reboot" BUT PowerOFF/ON laptop can see USB in Proxmox.Merci my man. Upgraded the firmware (2018 last version) but same result. Since I have a working solution and laptop maybe to old to solve this issue, we'll close the case. Thanks for the help, really appreciate it!
-
RAre you sure you want to interact with Proxmox VE SDN feature through Proxmox Datacenter Manager? Those are separate products and Proxmox Datacenter Manager currently only exposes a certain subset of Proxmox VE's SDN API. The API documentation...
-
JYou may want to take a look at our hosting partner [1]. Though, testing against PDM should be fairly straight forward on local hardware too. You can grab the ISO from our website [2] and spin up a VM. The minimum system requirements aren't that...
-
JAre you sure you want to interact with Proxmox VE SDN feature through Proxmox Datacenter Manager? Those are separate products and Proxmox Datacenter Manager currently only exposes a certain subset of Proxmox VE's SDN API. The API documentation...
-
Moayad replied to the thread Proxmox 8.4.19 to 9.2.4 failure.Hi, If you are use mdraid for `/boot` I would suggest migrating or reinstalling a supported layout, e.g., ZFS. Because mdraid is not supported [0]. [0] https://pve.proxmox.com/wiki/Software_RAID -
Moayad reacted to t.lamprecht's post in the thread New Debug Symbol (dbgsym) Package Repository with Like.
Today we're introducing a dedicated repository for debug symbol packages, reachable at https://dbgsym.proxmox.com/. Debug symbol packages (named <package>-dbgsym) contain the detached debug information for their matching binary package. They are...
-
Jjtru reacted to t.lamprecht's post in the thread New Debug Symbol (dbgsym) Package Repository with Like.
Today we're introducing a dedicated repository for debug symbol packages, reachable at https://dbgsym.proxmox.com/. Debug symbol packages (named <package>-dbgsym) contain the detached debug information for their matching binary package. They are...
-
Ttschmidt replied to the thread How to configure DSCP ?.Before DSCP / RFC 2474 there was the original TOS from RFC 1349. This still is in use in some places like iptables and apparently corosync. There the (set bit of the) observed value of 000-1000-0 means Minimize-Delay.
-
Francois Baillargeon reacted to Robin_T's post in the thread [SOLVED] Can't see USB ethernet on "reboot" BUT PowerOFF/ON laptop can see USB in Proxmox with Like.
François you have a twisted mind!!! It worked, I can soft-reboot and the USB port is UP. BUT this laptop only has 3.0 and 2.0 USB ports. The port that is working fine on soft reboot is 2.0, the 3.0 is not coming up. And the speed decrease from...
-
Ssudomaster.ljs replied to the thread VM becomes unresponsive during Veeam backup.Yes, we have opened a support case with Veeam and are awaiting a response.
-
Rrvencu replied to the thread Datacenter Manager API Dev Guide.Yes, I am not worried about the actual hosting requirements. I need to be able to simulate CRUD ops when creating networks, subnets, security groups and routing tables which I suppose require to rent some routers. Do you have a SDN primer...