Latest activity
-
RAre you sure you want to interact with Proxmox VE SDN feature through Proxmox Datacenter Manager? Those are separate products and Proxmox Datacenter Manager currently only exposes a certain subset of Proxmox VE's SDN API. The API documentation...
-
JYou may want to take a look at our hosting partner [1]. Though, testing against PDM should be fairly straight forward on local hardware too. You can grab the ISO from our website [2] and spin up a VM. The minimum system requirements aren't that...
-
JAre you sure you want to interact with Proxmox VE SDN feature through Proxmox Datacenter Manager? Those are separate products and Proxmox Datacenter Manager currently only exposes a certain subset of Proxmox VE's SDN API. The API documentation...
-
Moayad replied to the thread Proxmox 8.4.19 to 9.2.4 failure.Hi, If you are use mdraid for `/boot` I would suggest migrating or reinstalling a supported layout, e.g., ZFS. Because mdraid is not supported [0]. [0] https://pve.proxmox.com/wiki/Software_RAID -
Moayad reacted to t.lamprecht's post in the thread New Debug Symbol (dbgsym) Package Repository with
Like.
Today we're introducing a dedicated repository for debug symbol packages, reachable at https://dbgsym.proxmox.com/. Debug symbol packages (named <package>-dbgsym) contain the detached debug information for their matching binary package. They are... -
Jjtru reacted to t.lamprecht's post in the thread New Debug Symbol (dbgsym) Package Repository with Like.
Today we're introducing a dedicated repository for debug symbol packages, reachable at https://dbgsym.proxmox.com/. Debug symbol packages (named <package>-dbgsym) contain the detached debug information for their matching binary package. They are...
-
Ttschmidt replied to the thread How to configure DSCP ?.Before DSCP / RFC 2474 there was the original TOS from RFC 1349. This still is in use in some places like iptables and apparently corosync. There the (set bit of the) observed value of 000-1000-0 means Minimize-Delay.
-
Francois Baillargeon reacted to Robin_T's post in the thread [SOLVED] Can't see USB ethernet on "reboot" BUT PowerOFF/ON laptop can see USB in Proxmox with Like.
François you have a twisted mind!!! It worked, I can soft-reboot and the USB port is UP. BUT this laptop only has 3.0 and 2.0 USB ports. The port that is working fine on soft reboot is 2.0, the 3.0 is not coming up. And the speed decrease from... -
Ssudomaster.ljs replied to the thread VM becomes unresponsive during Veeam backup.Yes, we have opened a support case with Veeam and are awaiting a response.
-
Rrvencu replied to the thread Datacenter Manager API Dev Guide.Yes, I am not worried about the actual hosting requirements. I need to be able to simulate CRUD ops when creating networks, subnets, security groups and routing tables which I suppose require to rent some routers. Do you have a SDN primer...
-
Dder_Marcus posted the thread Anfrage zur Migration des Proxmox Corosync/Heartbeat-Netzwerks ohne Betriebsunterbrechung in Proxmox VE: Installation and configuration.Sehr geehrtes Proxmox Support-Team, wir betreiben aktuell einen Proxmox VE 8 Cluster mit zwei Nodes und einer gemeinsamen SAN-Infrastruktur. Die aktuelle Umgebung: Proxmox VE Version: 8.x Cluster: 2 Nodes Storage: gemeinsames SAN...
-
Francois Baillargeon replied to the thread [SOLVED] Can't see USB ethernet on "reboot" BUT PowerOFF/ON laptop can see USB in Proxmox.Well I have my share of weird stuff with cheap Realtek USB dongles so I figured it! Enjoy it mate, it may change your career (like it did for me)
-
Francois Baillargeon replied to the thread Migration from VMware.Great stuff, I will do a fistbump to the author!
-
HI. I tried your fix now, and it seemed to revolve it! (+ changing the controller to VirtIO SCSI single". It did a "Getting ready", reboot and now i have a screen I will follow up tomorrow.
-
RRobin_T replied to the thread [SOLVED] Can't see USB ethernet on "reboot" BUT PowerOFF/ON laptop can see USB in Proxmox.François you have a twisted mind!!! It worked, I can soft-reboot and the USB port is UP. BUT this laptop only has 3.0 and 2.0 USB ports. The port that is working fine on soft reboot is 2.0, the 3.0 is not coming up. And the speed decrease from...
-
Gguruevi replied to the thread High Latency on a new HDD-disks (ceph).Are they seated well in an appropriate bay with shock mounts? High latency specific to a spinning drive could be due to vibrations. Are they formatted to their 4Kn, because they can also be formatted to 512b sector size which would affect...
-
Jjacobrale replied to the thread [SOLVED] W: Couldn't identify type of root file system '/dev/pve/rootu/dev/pve/root' for fsck hook.Thanks Onslow! You're are undoubtedly right! Interestingly, I hadn't noticed before, but in fstab there is a NOTE above this line (the "/etc/fstab:/dev/pve/rootu/dev/pve/root / ext4 errors=remount-ro 0 1" line) that says "# Below added in...
-
gyptazy reacted to ManDal's post in the thread BackupPilot - Desktop Backup Client für Proxmox Backup Server with Like.
BackupPilot 1.0.7 ist ab sofort verfügbar. Mit diesem Update wurde vor allem die Verwaltung von Pre- und Post-Backup-Hooks deutlich verbessert. Neu können bestehende Hooks direkt bearbeitet werden. Name, Befehl und optional das... -
Ffmnamado replied to the thread Possible regression in PVE 9.2.x: unable to remove physical passthrough disks using "qm set --delete".Thank you very much for your time, and having been able to reproduce it. And thank you for dealing with the bugzilla reporting. I'll just wait for the fix to arrive in the future!
-
JJens-Complea replied to the thread Migration from VMware.HI. I tried your fix now, and it seemed to revolve it! (+ changing the controller to VirtIO SCSI single". It did a "Getting ready", reboot and now i have a screen I will follow up tomorrow.