Latest activity
-
JJohannes S reacted to toffer84's post in the thread Bestpratice Frage: Proxmox Host "clustern" with
Like.
Hallo zusammen, kurzes Update. Habe nen zweiten PVE Host hochgezogen, auf den gleichen Stand gebracht wie der erste, zwei LXCs gedumpt, dann auf dem ersten gestoppt und auf dem zweiten Host wiederhergestellt... Das hat alles wunderbar geklappt... -
JJohannes S reacted to proxuser77's post in the thread Quality of life update - Ram selection with Like.
Also, nothing will break if you enter 1000 instead of 1024 or 3000 instead of 3072. The applications in the container won't care, as long as the number is roughly the same as what you actually need. And you can always change it later if you...
-
Pproxuser77 replied to the thread Quality of life update - Ram selection.Yeah that would be nice. :)
-
GGavino reacted to Bent's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
Testing since 2026-04-11 on four hosts. So far so good overall — io_wait accounting issue still present / data unreliable, but aside from that stable (no crashes) on 3/4 hosts. The fourth host (used for game streaming to a client via...
-
JJPA replied to the thread s-tui fails intermittently with TypeError on fresh Proxmox 9.1 install.Hi, had the same issue, installed psutils - fixed the problem (that I might have caused myself with apt autoremove). - JP
-
GGavino reacted to jaminmc's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
The issue occurs because the bootloader interprets the version 7.0.0-1-rc7-pve as greater than 7.0.0-1-pve when comparing versions. The simplest solution is to run apt purge proxmox-{kernel,headers}-7.0.0-1-rc* to remove the affected packages...
-
GGavino reacted to Uturn's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
I've just updated to the final 7.0.0-1-pve and everything's running fine, except that after installation i had to pin this kernel, as the system would always choose the "old" 7.0.0-1-rc7-pve" one (tried on different machines without luck) So i...
-
GGavino reacted to jaminmc's post in the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available with Like.
To fix this, all you need to do is downgrade the pve-qemu-kvm like this: apt install pve-qemu-kvm=10.1.2-7 The Proxmox team should have pulled 10.2.1-1 off the test server once the high IO pressure was discovered.
-
Pproxuser77 replied to the thread Quality of life update - Ram selection.Also, nothing will break if you enter 1000 instead of 1024 or 3000 instead of 3072. The applications in the container won't care, as long as the number is roughly the same as what you actually need. And you can always change it later if you...
-
PRunning a calculator and typing X (for GB) * 1024 shouldn‘t be a hard task…
-
UdoB reacted to Impact's post in the thread Create thinpool "Name" and "Volume Group" same. Why? with Like.
Not missing anything. There is no such option in the GUI. I'd create the thin pool via the CLI anyways for reasons. Just out of curiosity, why not ZFS? -
UdoB reacted to dietmar's post in the thread Create thinpool "Name" and "Volume Group" same. Why? with Like.
The why is easy to answer: To make things simpler (there is no need for that).
-
HHariSeldon posted the thread Intel 12400 iGPU Passthough suddenly stops to work. in Proxmox VE: Installation and configuration.Hi everyone, I’ve my pve working perfectly for 3 years or so. After I decided to update to proxmox 9, everything was working good at a first glance. The only issue I have is that my Debian 13 VM, after few days it’s running and using the igpu...
-
dietmar replied to the thread Create thinpool "Name" and "Volume Group" same. Why?.The why is easy to answer: To make things simpler (there is no need for that). -
Jjohnblue posted the thread Create thinpool "Name" and "Volume Group" same. Why? in Proxmox VE: Installation and configuration.I read in the admin guide that when creating a thinpool from the command line the name of the thinpool (vmstore) can be different from the Volume Group (vmdata): However, when I create a thinpool from the UI there is no option to choose a...
-
-
OMV sollte auf einer virtuellen Festplatte keine Probleme machen (SMART fehlt halt) sofern man ext4 benutzt. Ich hatte es damals auch so verwendet bevor ich auf mein debian CT mit manueller Verwaltung umgestiegen bin.
-
Aber besser geeignet als die hier ebenfalls diskutierte Variante den Fileserver (NFS/Samba) direkt auf dem Host zu betreiben. Und unpriviligiert ist auf jeden Fall schon mal besser isoliert als priviligiert, da das System dort ja by Design keine...
-
Hallo zusammen, kurzes Update. Habe nen zweiten PVE Host hochgezogen, auf den gleichen Stand gebracht wie der erste, zwei LXCs gedumpt, dann auf dem ersten gestoppt und auf dem zweiten Host wiederhergestellt... Das hat alles wunderbar geklappt...
-
UdoB replied to the thread ERROR: job failed with err -61 - No data available.If I understand it correctly the physical source-device has denied reading defect sectors which are inside the virtual disk. The last resort would be to use a tool like ~$ apt show gddrescue Package: gddrescue Homepage...
-
Ttoffer84 replied to the thread Bestpratice Frage: Proxmox Host "clustern".Hallo zusammen, kurzes Update. Habe nen zweiten PVE Host hochgezogen, auf den gleichen Stand gebracht wie der erste, zwei LXCs gedumpt, dann auf dem ersten gestoppt und auf dem zweiten Host wiederhergestellt... Das hat alles wunderbar geklappt...
