Der OP hat seine Situation doch geschildert. Da sind so viele Fußfehler drin, dass es sinnlos ist ein log zu analysieren. Nebenbei hat er nur sporadische Fehler.
Hi Thomas
Thanks for the follow up.
This is what I got from my boss.
All he originally wanted from me was to setup the Influx data collection so it could be piped to our own reporting database.
(I went ahead and built out the Grafana stuff...
While I would agree with RAIDZ1 for obvious reasons, RAID5 can still be useful if (and only if!) the controller has a battery cache to speedup the HDD access. Although it would propably still perform better with a switch to RAID1/RAID10
PBS is mostly metadata read, so instead of svdev I would go with L2ARC.
There you are free to use one drive or three drive in RAID0 or whatever.
PS: please not that I would highly discourage you from such a wonky setup in general. RAID5 or...
Ich glaube dein Hauptproblem ist tatsächlich Kopfsache.
Wenn Speicher knapp wird, stecke einfach eine oder mehrere Disks nach.
Getrennt sichern, erhöht die Komplexität, aber diese gefühlte Sicherheit ist keine, denn wenn ein Backup kaputt geht...
Ich sehe jetzt nicht den Widerspruch, der OP sollte doch beides tun: Einerseits, um überhaupt wieder Backups zu haben (finde ich nicht sooo unwichtig) und zum anderen um solche Fehler zu vermeiden. Aber ohne Taskslogs kann man da halt schlecht...
Beantworte erst mal die Frage von Dominik.
Ja die backups sind defekt, aber retten kann man eventuell die Daten. Wenn die defekten Chunks noch auf der Quellseite (PVE) vorhanden sind und die noch einmal gesichert werden können, ist es eventuell...
Warum an Sicherungen puzzlen, wenn die Hütte nicht brennt?
Die gleiche Zeit sollte man lieber investieren um zu verstehen, warum die Probleme überhaupt entstehen und bestenfalls beseitigen.
That's right but only 4 hdd's are given. raid1+raid10 with hybrid-xfs works too as for a raid1+raid6 you want much more hdd's.
But anyway doing raid1/raidz/raid5 without configured hot-spare is quiet risky !!
Warum an Sicherungen puzzlen, wenn die Hütte nicht brennt?
Die gleiche Zeit sollte man lieber investieren um zu verstehen, warum die Probleme überhaupt entstehen und bestenfalls beseitigen.
Das hättest du auch in zwei Sätzen schreiben können:
Wir wollen viel, aber bei uns isses wie es ist und daran können wir nichts ändern.
Wir schrauben aber sicherheitshalber schon mal an Dingen, von denen wir keine Ahnung haben.
Beantworte erst mal die Frage von Dominik.
Ja die backups sind defekt, aber retten kann man eventuell die Daten. Wenn die defekten Chunks noch auf der Quellseite (PVE) vorhanden sind und die noch einmal gesichert werden können, ist es eventuell...
Ich glaube dein Hauptproblem ist tatsächlich Kopfsache.
Wenn Speicher knapp wird, stecke einfach eine oder mehrere Disks nach.
Getrennt sichern, erhöht die Komplexität, aber diese gefühlte Sicherheit ist keine, denn wenn ein Backup kaputt geht...
There's another option, you know. On the PERC, you make single-disk-raid0 for each drive you want to be member of the ZFS pool.
Folks will tell you that's horrible. But, they will tell you its horrible to even use HDD, throw up their hands and...
Ich glaube dein Hauptproblem ist tatsächlich Kopfsache.
Wenn Speicher knapp wird, stecke einfach eine oder mehrere Disks nach.
Getrennt sichern, erhöht die Komplexität, aber diese gefühlte Sicherheit ist keine, denn wenn ein Backup kaputt geht...
PBS is mostly metadata read, so instead of svdev I would go with L2ARC.
There you are free to use one drive or three drive in RAID0 or whatever.
PS: please not that I would highly discourage you from such a wonky setup in general. RAID5 or...
Well that was a strange one. 3 hours later, restore has resumed.
Still no idea what the cause of the delay was - the previous (failed) attempt to restore that same VM started restoring chunks within a few minutes.
Hi, @CycloneB
Is there a possibility that in the browser you have some add-on (e.g. Stylus) which customizes the GUI depending on the node? And some time in the past you customized the older nodes' look but you haven't applied the same settings...