Latest activity
-
Ufixed kernels for 6.8 and 6.17 are now on pve-no-subscription
-
Uand now on enterprise as well.
-
Jjohn-tapestry replied to the thread Utilizing PMG with Office 365.I had the port sent to 587. I set it to 25 and restarted it, but I won't be able to test until after work hours. I'll update when done.
-
Bbrnogu replied to the thread VM freezes when passthrough RTX 3080 to Windows 11 on Proxmox 9.2.3.Hello @driley , Sorry for the delay. Just added the exceptions as suggested, and ran update-initramfs -u Then pinned the new kernel again by running proxmox-boot-tool kernel pin 7.0.12-1-pve. The machine froze again, so I had to pin...
-
Kkangaroo72 posted the thread LXC (Paperless-NGX) stürzt von Zeit zu Zeit ab... in Proxmox VE (Deutsch/German).Hallo zusammen. ich selbst nutze Paperless (2.20.15) als LXC - mit Docker Compose auf PVE 9.1.9 ohne Probleme (auch unter PVE 8 problemlos). Ein Freund von mir (leider im März verstorben) hat auch PVE (8.4.19). Auch dort läuft Paperless-NGX...
-
Uuiffiu replied to the thread Access to download proxmox cdn is problematic.A Proxmox Offline Mirror might help? Except when you also want to limit outbound access for POM...
-
fba reacted to julianfegert's post in the thread PVE 9.2.4 – Neue Kernel 6.17.13-15 / 7.0.14-4 starten auf Legacy-BIOS-Systemen nicht, UEFI-Host funktioniert with
Like.
Problem gelöst und behoben! Ursache: Der Legacy-BIOS-Bootpfad (INT13, bei uns hinter LSI 9271-4i bzw. Fujitsu EP420i) kann nur die ersten 2 TiB der Disk lesen. Da /boot auf dem 7-TB-Root-LV liegt, hatte der ext4-Allocator die neuen... -
Ffloh8 replied to the thread Stupid question...how do you backup, the backup server?.For easy desaster recovery use "rear".
-
Jjulianfegert replied to the thread PVE 9.2.4 – Neue Kernel 6.17.13-15 / 7.0.14-4 starten auf Legacy-BIOS-Systemen nicht, UEFI-Host funktioniert.Problem gelöst und behoben! Ursache: Der Legacy-BIOS-Bootpfad (INT13, bei uns hinter LSI 9271-4i bzw. Fujitsu EP420i) kann nur die ersten 2 TiB der Disk lesen. Da /boot auf dem 7-TB-Root-LV liegt, hatte der ext4-Allocator die neuen...
-
Bbyndgrv replied to the thread New Install PVE GUI loss when VM starts.Looking at the wireshark results, it sems to be a DHCP or multicast. I think at this point the best option for me is to get a Intel NIC. Is there any issues with setting up a i226 or is it pretty plug and play? I also have an open SFP+ on my...
-
-
MMisterW replied to the thread [SOLVED] Invalid packets from Proxmox causes Proxmox server to be unreachable.and that was the problem , with no subnet specified , it would seem Proxmox/debian didnt think it was in the same subnet and therefore routed it via the specified gateway. In this case the gateway was Openwrt which didnt expect the packet to be...
-
fba replied to the thread TPM Modell ändern.Hi, Ohne Code-Änderung geht das nicht. Das TPM-Modell wird in PVE/QemuServer/TPM.pm festgelegt und außer der Version gibt es für den Aufruf von QEMU auch keinen anderen übergebenen Parameter.
-
MMisterW reacted to arnoproxmox's post in the thread [SOLVED] Invalid packets from Proxmox causes Proxmox server to be unreachable with Like.
Added /24 service networking restart enable "drop invalid packages" on OpenWRT router. Proxmox server stays reachable. Issue solved. Thanks
-
Aalexskysilk replied to the thread Feature request - zfs delegation with lxc.Thats why. it isnt possible to expose JUST the resources allocated to the container. Which means the container has the capability to read other datasets (the security hole) and damage/destroy them (the practical risk.) The whole point of the...
-
Aarnoproxmox replied to the thread [SOLVED] Invalid packets from Proxmox causes Proxmox server to be unreachable.Added /24 service networking restart enable "drop invalid packages" on OpenWRT router. Proxmox server stays reachable. Issue solved. Thanks
-
Aarnoproxmox replied to the thread [SOLVED] Invalid packets from Proxmox causes Proxmox server to be unreachable.Added How is a device called that routes (wifi) traffic between (and the same) subnets? There is a device between client and server.
-
Ssnullp posted the thread Qemu-kvm upstream has a regression bug on emulated intel-iommu (vIOMMU) in Proxmox VE: Installation and configuration.Culprit: https://gitlab.com/qemu-project/qemu/-/commit/c7b2e22bd95710e404c393e9f563cfe7404220c1 Fix: https://gitlab.com/qemu-project/qemu/-/commit/dbc0ed56223011281e14b5cb8c02453915d35d12 The bug is included in the v11 release, fix was just...
-
OOnslow replied to the thread [SOLVED] Invalid packets from Proxmox causes Proxmox server to be unreachable.This vague description seems contrary. If all is the same subnet, then the traffic doesn't use a router, by definition. So, exactly, what are the IP addresses of the client, the router, the Proxmox server? [ addition ]: and what are the netmasks...
-
Ddevilrunner replied to the thread Feature request - zfs delegation with lxc.Not on those platforms but happy to keep this thread going.
-
FForgemaster98 replied to the thread Windows Server 2025 random READ I/O's.We have found that Oracle’s VirtIO drivers are currently the most stable option for server 2k25 (Oracle VirtIO Drivers for Microsoft Windows Version 2.3.2)
