- Dont't use apt upgrade
- Why is /etc/interfaces formatted so poorly? No identation at all
- Why is your host commented out in /etc/hosts?
- tap* is most certainly not the right interface but I see no real one. Please share lspci -nnk
- Did you...
Ich habe es bisher so verstanden: Wenn die VM seine IP per DHCP bezieht, läuft die Installation durch, und sobald du die IP manuell ohne DHCP setzt, funktioniert es nicht.
Das deutet für mich darauf hin, dass bei der statischen Konfiguration...
If your "rpool" is connected to the Dell PERC H310, then I would try adding the kernel parameter "pcie_aspm=off" for a test.
Those LSI-based HBAs used to have massive issues with ASPM, resulting in basically an unusable card in the worst case.
Ok, wenn deine SSD tatsächlich defekt ist, würde ich einfach das vorhandene Backup zurückspielen - damit hast du das System am schnellsten wieder sauber am Laufen.
In deiner Schilderung sehe ich aktuell kein Proxmox-Problem, sondern eher Themen...
Ok, wenn deine SSD tatsächlich defekt ist, würde ich einfach das vorhandene Backup zurückspielen - damit hast du das System am schnellsten wieder sauber am Laufen.
In deiner Schilderung sehe ich aktuell kein Proxmox-Problem, sondern eher Themen...
Please excuse the poor formatting. Last time this happened I was able to fix it by just updating the interface names in /etc/interfaces.
The host was commented out in /etc/hosts as a testing method. That's when I still thought it was a DHCP...
Not screwed at all, but you will have downtime. The way forward depends on whether the payload (virtual disks) are located on the same disk as your system or not.
IF the virtual disks are on a seperate filesystem you're home free- just reinstall...
This is amazing! Thanks for doing this and also for including aarch64 packages.
Is there any reason why you're not getting this included in upstream repo, though?
Hi, @Yerni
It's usually not possible without a reboot.
"D" state means "uninterruptible sleep state". Unless the I/O device recovers (so not your situation), only a reboot removes such a process.
As for the rest of your issue, I don't quite...
Please explicitly mention in your projects that this (and other Proxmox products) are not official builds but rather community maintained and that you are not affiliated with Proxmox Server Solutions Gmbh. Thanks.
Aber Claude und Mistral schon? Da werde ich schon übellaunig.
Die Steuerung gehört DIREKT auf den PVE-Host. Der regelt dann das geordnete Herunterfahren. In welcher Reihenfolge VMs heruntergefahren werden, kannst du sogar nach Gusto definieren...
@fabian @t.lamprecht
Trying to contact HP was a dead end so I made a backup of my boot drive and then tried using this UEFI Shell that includes Mosby which allowed me to use the BIOS Setup Mode to deploy the new Microsoft UEFI CA keys along with...
@MichalCirrus or @Stoiko Ivanov, could you please update the post title to mention that the issue appears after the 9.2 upgrade specifically on OVHcloud servers (and fix the typo in rEFInd)? It may help search engines find the post more easily.
Hi, guys I have the same issues on my pve02. I had an empty lune, so I tried to delete it.
History of my commands that i used.
1. Deleted from data center storage.
2. vgremove vg_lun016
3. pvremove /dev/mapper/lun016
4. vgremove vg_lun016
5...