Latest activity
-
BNun stelle ich fest, dass die Shellys sporadisch die Verbindung verlieren, während die eigentliche Verbindung stabil steht. Hier gibt es nämlich sogar auch genau ein zentrales Monitoring. Dinge die nicht konfiguriert wurden, werden natürlich...
-
gurubert reacted to Johannes S's post in the thread Clarification about Ceph suitability for a 2-node storage architecture with a witness/quorum node with
Like.
Don't. Ceph needs at least three nodes unless you change the defaults ( and doing this is a bad idea, see: https://forum.proxmox.com/threads/ceph-pool-size-is-2-1-really-a-bad-idea.68939/ ) The recommended requirements in the documentation are... -
gurubert reacted to MarkusKo's post in the thread Clarification about Ceph suitability for a 2-node storage architecture with a witness/quorum node with Like.
No, Ceph needs at least 3 nodes, for production 5 nodes or more (odd number) are recommended: PVE docs
-
gurubert reacted to UdoB's post in the thread Clarification about Ceph suitability for a 2-node storage architecture with a witness/quorum node with Like.
Two years ago I tried to use Ceph in my homelab. My experience: https://forum.proxmox.com/threads/fabu-can-i-use-ceph-in-a-_very_-small-cluster.159671/ I am not a Ceph user now. But I would not start with fewer than five active nodes. Just my...
-
Have you already purchased the motherboards? If not price out single cpu systems with plenty of memory. The savings over dual cpu ( assuming you were pricing that out) may leave cash to afford nvme’s or data a center grade ssd
-
It depends on your performance expectations, but ceph is quite capable to deal with this kind of mixed hardware- as long as you make sure that you have EQUIVALENT CAPACITY PER OSD TYPE on each osd server. In your case, assuming you want all 6...
-
Hi AllYourSmurf if you are able to do so, you should distribute your nvmes more equally across, the nvme nodes or even better across all nodes. With the current distribution only 3TB of your NVME-Storages will be usable (with the default 3-2...
-
Vvisioner-ua replied to the thread Proxmox Backup Server 4.2 on Hezner SX135..My server has 128GB of RAM and uses ZFS, so I needed to set `iommu=off`. You can try setting `iommu=pt`. This shouldn't break PassThrough.
-
JJohannes S replied to the thread [SOLVED] Copy a vm from one proxmox server to another over the internet with limited storage..You can also use pct remote-migrate or qm remote-migrate in the shell on the ProxmoxVE nodes. The shell can be reached from the GUI
-
JJohannes S reacted to VictorSTS's post in the thread dirty-bitmap status: existing bitmap was invalid and has been cleared - every.single.time! with Like.
IMHO it's better to use PBS sync to copy backups from one PBS to another instead of doing backup of the VM multiple times, even if PVE could use multiple dirty-maps for a few PBS. Less load on source PVE, less load on VMs and you offload the...
-
JOK, wenn du keine echten Latenzen misst sondern nur die Anzeige im Taskmanager meinst, da sind immer hohe Fantasiewerte. Guck mal mit Tools wie nmon oder iotop auf dem Host wie die Auslastung und Latenzen auf der LUN sind.
-
Jroot voll? was sagt df -h?
-
JJohannes S replied to the thread Clarification about Ceph suitability for a 2-node storage architecture with a witness/quorum node.Don't. Ceph needs at least three nodes unless you change the defaults ( and doing this is a bad idea, see: https://forum.proxmox.com/threads/ceph-pool-size-is-2-1-really-a-bad-idea.68939/ ) The recommended requirements in the documentation are...
-
Bberathram replied to the thread Proxmox Backup Server 4.2 on Hezner SX135..Interesting, unfortunately this solution is not for me since I require IOMMU.
-
MMarkusKo replied to the thread Clarification about Ceph suitability for a 2-node storage architecture with a witness/quorum node.No, Ceph needs at least 3 nodes, for production 5 nodes or more (odd number) are recommended: PVE docs
-
JJohannes S reacted to micneu's post in the thread Windows 11 VM in Domain - wie am Besten zur Vorlage? with Like.
Was ist mit dieser Lösung? Ich habe das bei mir schon mehrfach so gemacht (ohne Domäne): https://www.heise.de/ratgeber/Wie-Sie-Ihre-Windows-Installation-mit-c-t-WIMage-sichern-10423647.html
-
Llethuer replied to the thread Proxmox Oberfläche nach Stromausfall nicht mehr erreichbar.ist ja drin nano /etc/crontab update-smart-drivedb habe ich ausgeführt und es wurde was neues gezogen root@proxmox:~# for disk in /dev/sd[a-z]; do smartctl -a $disk; done Linux proxmox 5.15.131-2-pve #1 SMP PVE 5.15.131-3 (2023-12-01T13:42Z)...
-
-
Mmicneu replied to the thread Windows 11 VM in Domain - wie am Besten zur Vorlage?.Was ist mit dieser Lösung? Ich habe das bei mir schon mehrfach so gemacht (ohne Domäne): https://www.heise.de/ratgeber/Wie-Sie-Ihre-Windows-Installation-mit-c-t-WIMage-sichern-10423647.html
-
Kkoby replied to the thread Filter email using X-SPAM-LEVEL.Hi, I have the same problem, I'm racking my brains to solve it, after 4 hours of testing, still nothing. Poorly, PMG does not see what he has added....
-
TTErxleben replied to the thread Input/Output Fehler bei Upgrade.root voll? was sagt df -h?
