Latest activity
-
LLonelyLou reacted to Davidegb's post in the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares with
Like.
@hybridencounter Thanks for your data. Let's see if with data from both cases we can narrow down the issue so developers can finally fix it Update — further investigation, more data for developers After more testing today, I can refine the... -
LLonelyLou reacted to Davidegb's post in the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares with Like.
Update 2 — deeper investigation, the rabbit hole goes further More testing today revealed something unexpected that significantly refines the diagnosis. Root cause: two independent but chained bugs. After extensive testing across multiple kernels...
-
Aalexskysilk replied to the thread Seeking advice on best practices.You should also be aware that the vsphere portfolio doesnt overlap completely with PVE. I would begin by mapping out what your guests do, and what services do you depend on; do you use dswitches, vrops, storage plugins, nsx, etc. 1. Storage-...
-
Nsorry wrong feature to check ;) ceph osd pool autoscale-status
-
Llethuer replied to the thread Proxmox Oberfläche nach Stromausfall nicht mehr erreichbar.In meinem letzten Post habe ich jetzt einen funktionierenden Weg beschrieben wie ich ein HomeAssistant Backup wieder in eine neue VM einspielen kann, Hier geht es letztlich aber noch um den Weg auch über proxmox selber das gesamte System schnell...
-
-
Mmichaelc posted the thread [SOLVED] PVE 8 random reboots with kernel 6.8.12-19+ on Epyc v4 (just for the record) in Proxmox VE: Installation and configuration.With the deprecation of PVE 8 coming in August, this is for general informational purposes in case something similar arises again with other kernel builds. Running PVE 8 with up to kernel 6.8.12-8 on two servers (AMD Epyc v4 processors) the...
-
Aalex3025 replied to the thread Blacklisting a specific PCIe device (HBA).Thanks for the reply, however I had to use the following rules to make it work: ACTION=="add", SUBSYSTEM=="pci", ENV{PCI_SLOT_NAME}=="0000:01:00.0", ATTR{driver_override}="vfio-pci" ACTION=="add", SUBSYSTEM=="pci"...
-
Llethuer replied to the thread Proxmox Oberfläche nach Stromausfall nicht mehr erreichbar.Die VM habe ich einfach mal aufgesetzt, analog zu dieser Video Anleitung: https://youtu.be/CXBqeis7fgc?si=MCxiRGLzp-KdBM0D Und Simon42 beschreibt hier was bei der Migration von einem HomeAssistant Backup zu beachten ist...
-
-
OHi @TVKP , welcome to the forum. All your questions are valid to ask. The answers, as usual, depend on variables that are too many to list them all. 1 Storage: the choices between centralized SAN and Distributed storage will be influenced by...
-
Ddot. replied to the thread dirty-bitmap status: existing bitmap was invalid and has been cleared - every.single.time!.Even though this is an old thread, I think this is a great idea to support dirty-bitmaps per target: This would allow 2 (or more) completely separated and fully independent backups sets.
-
bbgeek17 replied to the thread Seeking advice on best practices.Hi @TVKP , welcome to the forum. All your questions are valid to ask. The answers, as usual, depend on variables that are too many to list them all. 1 Storage: the choices between centralized SAN and Distributed storage will be influenced by... -
Ddot. reacted to fiona's post in the thread dirty-bitmap status: existing bitmap was invalid and has been cleared - every.single.time! with Like.
Hi, currently, there is no such feature yet. It can be done of course and something similar is needed for a "backup provider API" that was proposed a while ago: https://lore.proxmox.com/pve-devel/20241114150754.374376-1-f.ebner@proxmox.com/ For...
-
BBenDrankin posted the thread Intel ARC Passthrough to linux VM works, Sata HBA passthrough to Truenas Works, running both at the same time crashes host in Proxmox VE: Installation and configuration.I have been attempting to do hardware passthrough where I pass my Intel ARC GPU through to a Ubuntu Server VM, and two Sata HBAs to a separate Truenas Scale VM. One or the other works fine, but if I attempt to start both VMs with the passthroughs...
-
LPaessler is working on it : Exciting news! Your idea is now in progress! Our team has started working on bringing this feature/improvement to life. We're diligently developing and testing, and we'll keep you updated on our progress. We're...
-
Ffabian69420 replied to the thread [SOLVED] Can't get Nvidia GPU passthrough to work on LXC.this happened after #12 as i mentioned in #14 btw. also there is no backup, bc it wouldnt let me backup bc of "insufficient space" in a temp folder or something. and where do i find that config file again?
-
TTVKP posted the thread Seeking advice on best practices in Proxmox VE: Installation and configuration.Long-time Windows administrator making the jump into a VMWare shop that is looking to migrate out to PVE. I'm trying to get my head around Proxmox and am working on a few experimental servers so that I can make recommendations on the environment...
-
Falk R. replied to the thread Bootloop in Windows 11 VM nach Update auf PVE 9.2.2.Microsoft schreibt das einfach nur in die Doku. Wenn etwas nicht wie gewollt funktioniert berufen die sich immer auf die Doku. Bei Redhat 10 wird der x86-64-v3 sogar erzwungen, sonst startet das System nicht. Der V3 Standard ist jetzt auch nicht... -
Cconfused27 reacted to UdoB's post in the thread [SOLVED] Copy a vm from one proxmox server to another over the internet with limited storage. with Like.
No, that's definitely the wrong tool for your task. If you want to use a supported method with a GUI you may look at https://pdm.proxmox.com/docs/ - you can connect multiple PVE installations with this. As I am not using that one, I can only...
-
Cconfused27 reacted to Kingneutron's post in the thread [SOLVED] Copy a vm from one proxmox server to another over the internet with limited storage. with Like.
Echoing UdoB, setup a PDM VM and connect both PVE servers to it. Under the Remotes in the left pane, click on source server and in the middle pane you should see a little paper-airplane icon ( the icons in order are power, start, airplane...
-
Falk R. replied to the thread Proxmox Oberfläche nach Stromausfall nicht mehr erreichbar.Du hast eine Verbindung zu der Influx DB wo auch immer eingerichtet. Bitte prüfe ob die InfluxDB deine Daten empfängt. Wenn die Daten alle in der InfluxDB abrufbar sind, ist alles OK. Sonst schaue mal wie du die InfluxDB eingerichtet hast, ob...
