Latest activity
-
LnxBil replied to the thread [SOLVED] Crowdstrike Falcon Sensor on PVE 9 Host?.Install deb via apt and take care of the dependencies with (path can also be relative) apt install /path/to/deb/file/install.deb I don't know since when this works, but it does. -
Uuzumo replied to the thread MEMDB_MAX_FILE_SIZE on pmxcfs is too small (1 MiB).It’s usually unthinkable for up to 6,000 users to access the hypervisor directly to perform tasks. It’s unclear exactly what permissions users are granted, but there’s no reason they should need to perform operations directly through the Proxmox...
-
LnxBil replied to the thread Adding emulated NVME drive to Virtual machine in LVM Disk storage.It should be visible via ls in the CLI. Is it really datasore instead of datas_t_ore? Edit: Please also check if the volume is active via lvm
-
abied-charreton replied to the thread PDM cross-cluster migration: prerequisites checklist I wish I had before my first attempt.Hey, remote migration precondition checks are currently being worked on. If you have a checklist, it would be highly appreciated if you could share it in a Bugzilla [0] entry, as this is where we can best keep track of the progress. [0]... -
JJeffthomson890 replied to the thread PDM cross-cluster migration: prerequisites checklist I wish I had before my first attempt.That's a useful idea for a checklist. One thing I'd be interested to see included is whether you verified CPU compatibility between the source and destination clusters before migrating. I know differences in CPU features can affect live migration...
-
JJeffthomson890 reacted to atlas32's post in the thread PDM cross-cluster migration: prerequisites checklist I wish I had before my first attempt with
Like.
Hi, I just did my first cross-cluster live migration via PDM (between two PVE 8.x clusters, both enrolled in the same PDM instance). It worked, eventually, but I hit several "obvious in hindsight" prerequisites that aren't all in one place in... -
CCRCinAU posted the thread [SOLVED] Boot failure on NVMe drive on kernel 7.0.12-1 in Proxmox VE: Installation and configuration.I'm in the middle of troubleshooting this. I was doing a smart test on my nvme drive (Seagate FireCuda 510 SSD ZP500GM30001) when the drive went unresponsive. dmesg showed errors like: [ 337.272885] nvme nvme0: I/O tag 757 (12f5) opcode 0x2...
-
TTaledo replied to the thread PVE7 / PBS2 - Backup Timeout (qmp command 'cont' failed - got timeout).Hi, As this thread is quite old you'll have better luck creating a new one to get help!
-
Jj.theisen replied to the thread unable to restore an privileged CT as unprivileged 2026.Ah i see, thanks for clearing that up! Still i don't see the issue then. unprivileged 1 means the container is unprivileged. A privileged container would have no unprivileged directive at all in its config file. So what is the config you would...
-
RRobFantini replied to the thread unable to restore an privileged CT as unprivileged 2026.I see , had thread name wrong. Just fixed that unable to restore an privileged CT as unprivileged is the issue
-
Aatlas32 posted the thread PDM cross-cluster migration: prerequisites checklist I wish I had before my first attempt in Proxmox VE: Installation and configuration.Hi, I just did my first cross-cluster live migration via PDM (between two PVE 8.x clusters, both enrolled in the same PDM instance). It worked, eventually, but I hit several "obvious in hindsight" prerequisites that aren't all in one place in...
-
shanreich replied to the thread SDN stopped forwarding.Would be interesting to see the FRR status before restarting: vtysh -c 'show bgp l2vpn evpn route' vtysh -c 'show bgp neighbor' + the corresponding SDN config: cat /etc/pve/sdn/zones.cfg cat /etc/pve/sdn/vnets.cfg cat /etc/pve/sdn/subnets.cfg... -
bbgeek17 replied to the thread [SOLVED] Crowdstrike Falcon Sensor on PVE 9 Host?.Great! You can mark the thread as solved by editing the first message and selecting the appropriate subject prefix. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
PPALLBHV replied to the thread [SOLVED] Crowdstrike Falcon Sensor on PVE 9 Host?.Hey guys. thank you for your reply. I hab a typo with installing libnl-genl-3-200 ... My fault... after installing it i can install the falcon sensor without problems. thank you
-
Falk R. replied to the thread Probleme mit apcupsd.Entweder die USV meldet Blödsinn (Firmwarebug) oder die Batterie ist tatsächlich nicht mehr so gut. Wie alt ist die Batterie? Produktionsdatum und nicht installation. Was sagt ein Selbsttest der USV? Das Tool ist doof und gibt nur die Infos der... -
bbgeek17 replied to the thread [SOLVED] Feature request: add column "VLAN" in overview of VMs/CTs.Just keep in mind that there are installations with 100s if not thousands VLANs. There are already TAGs that can address your need in a way. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
Ffabian69420 replied to the thread [SOLVED] Can't get Nvidia GPU passthrough to work on LXC.no i don't use Secure Boot. I did have the package but before installing it your way i removed it with apt remove nvidia* so it removes everything even related to nvidia and its drivers. and the result to your commands: # modprobe nvidia modinfo...
-
Ccyruspy replied to the thread SDN stopped forwarding.What I found: 1. Changes in reverse path filter behavior (8 to 9 or 9.0 to 9.1, couldn't tell). Fixed once, shouldn't repeat 2. East west traffic didn't work with some nodes or with specific segments or specific VMs. Happened several times. FRR...
-
Das ist in der Tat eine witzige Antwort und wird hiermit für die Nachwelt archiviert, nur falls wer die Originalantwort löscht ;)
-
Falk R. replied to the thread Proxmox Oberfläche nach Stromausfall nicht mehr erreichbar.Wenn das System nicht in die Influx schreiben kann, schreibt der das als Caching auf die lokale Disk. Daher unbedingt die Influx Connection kontrollieren.