Latest activity
-
Eelendiir replied to the thread LCX not starting after upgrading PVe from 9.1.x to 9.2.2 - Mount fails.As far as I know the only changes that have been made can be found in /etc/modprobe.de: One is dirty-frag.conf install esp4 /bin/false install esp6 /bin/false install rxrpc /bin/false And for copy-fail called disable-algif.conf install...
-
GGratified4693 posted the thread Failed to find logical volume vm-13649-disk-0 after reverting snapshot StarLVM plugin, FC storage in Proxmox VE: Installation and configuration.Hello, We've recently migrated from ESXi to Proxmox. We are using the same storage we used at ESXI EV, it's FC SAN mounted as usual in such case. We have two disks 15Tb each. We use Proxmox as cluster with multuple nodes, 4 nodes now active...
-
-
BBu66as reacted to fabian's post in the thread proxmox-kernel-6.8.12-29 causing array controller errors with
Like.
-30 contains the fix, see https://bugzilla.proxmox.com/show_bug.cgi?id=7671 -
Jj.theisen replied to the thread Ceph 3-node cluster, VM I/O freeze after node reboot/update.Thanks for the logs. So to me it seems like there was a network communication issue where the nodes 1 and 2 couldn't communicate with each other over the Ceph interfaces. Corosync seems fine according to the log. My reason to believe this: Log of...
-
Ok, got it. I can access the Ceph RBD directly through qemu-img. Great! - Shrink partition inside the VM (Windows, gparted, etc.) - Shutdown VM - Resize the image: qemu-img resize -f raw --shrink rbd:<pool>/<disk-img> <size> (example: qemu-img... -
Eelendiir replied to the thread LCX not starting after upgrading PVe from 9.1.x to 9.2.2 - Mount fails.Hm, not sure if this setting has been touched. Here is the wanted output: root@proxmox-2:~# sysctl kernel.yama.ptrace_scope kernel.yama.ptrace_scope = 3
-
Cclash replied to the thread set an ip address for a vxlan bridge.Ive created a subnet (10.10.10.0/24, gw. 10.10.10.1) for Vnet wan1. After applying I cannot find an ip address assigned to the bridge. I was search in /etc/network recursivley. Maybe there is another routing table or namespace where the ip is...
-
Eelendiir replied to the thread LCX not starting after upgrading PVe from 9.1.x to 9.2.2 - Mount fails.Thanks Daniel for providing the correct command syntax. Here is the correct output from journalctl that does contain the failed start of LXC. Just the clearify: it is not only this container that fails. I see all containers not working on our 3...
-
Cczechsys replied to the thread DKIM signing only PMG generated mails.@Stoiko Ivanov any reply please?
-
Aadmingsi replied to the thread [SOLVED] Multiple DKIM.Separate DKIM keys for each domain are a must-have for security, as they prevent email spoofing and ensure that each domain's emails are cryptographically verified independently, reducing the risk of a single compromised key affecting multiple...
-
dakralex replied to the thread LCX not starting after upgrading PVe from 9.1.x to 9.2.2 - Mount fails.Have you started the affected container during the time of this log? You can use journalctl --since '2026-06-12 09:38:00' --until '...' to capture the output between some time span (I filled in the --since with the rough start time of the LXC... -
LLonnie replied to the thread In 7.0, I Can't backup a container to a NFS that worked in 6.0.SOLUTION FOUND ------------------------------ After further investigation, I can now confirm the root cause and working solution for LXC container backups failing to NTFS NFS shares in Proxmox 7+. THE PROBLEM (TWO-PART) 1. NTFS filesystem...
-
dcsapak replied to the thread PBS and iSCSI Tape drive.ok what error do you get if you try to use it? (the status command looks fine for a drive with no tape inserted) -
RHere's a simple script I wrote for our Nagios that monitor errors with the replications #!/bin/bash # Script to check Proxmox storage replication # ExitCode: # 0 = Ok # 1 = Warning # 2 = Critical # 4 = Ok (No replicatons configured)...
-
UdoB reacted to anna_pve_berlin's post in the thread Proxmox 9 cloud-init and Debian 13 (Trixie) fails to set DNS with Like.
Small caveat with that workaround: on Debian 13 `/etc/resolv.conf` is often a symlink managed by resolvconf or systemd-resolved, so writing it directly can be overwritten later or bypass the resolver stack. If this is only for a template, I would... -
UdoB reacted to anna_pve_berlin's post in the thread set an ip address for a vxlan bridge with Like.
If you mean an IP on the PVE host side, I would not edit the generated `wan1` bridge directly; SDN will overwrite that again. Add it as a subnet/gateway in Datacenter -> SDN -> VNets/Subnets, then Apply SDN and check `ip addr show wan1` plus the...
-
Kkeeka replied to the thread PVE 9 apparmor errors.I switched to chrony at some point but I cannot remember if I was using systemd-timesyncd or full ntpd. Either way AIUI `apt install chrony` will warn about removal of a conflicting package. My preference would be for switching time daemon rather...
-
Eelendiir replied to the thread LCX not starting after upgrading PVe from 9.1.x to 9.2.2 - Mount fails.Good morning, apt -U dist-upgrade works fine. No errors. I just have updated librabbitmq4. systemctl --failed shows me those two LXCs that I tried to restart on this server: root@proxmox-2:~# systemctl --failed UNIT LOAD...
-
ASince search brought me here while I was looking for some answers, I'm posting back here with more details as well. The ID refers to the Relying Party ID and must be the specific domain of the node, or a parent domain for all nodes. The Name is...
-
Aatrain reacted to aj@root's post in the thread [TUTORIAL] Howto: WebAuthn Passkeys across Cluster or on single Node with Like.
Live Training Video (40m) https://www.youtube.com/watch?v=Qhm8NsYq6dc WARNING: Follow Carefully, You May Only Get 1 Try As per our experimentation, it is possible to misconfigure WebAuthn in a way that cannot easily be fixed by using the...
