Latest activity
-
Jjonahftw replied to the thread Proxmox VE Install and Boot problems with ASUS GT710 2gb Low Profile GPU.Okay I did correct and clarify that its not the 730 but the 710 and corrected lots words. Somewhy the post was messy and I do not know why the fixes made before posting did not register but meh. So yeah boot parameters did not work, and would be...
-
Ttjh replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.EDIT: Please ignore previous message if you saw it. It's my fault, i'm doing this echo scan-time > /sys/kernel/mm/ksm/advisor_mode which was the cause
-
Gguruevi replied to the thread HP Agentless Management Service for proxmox VE 9 ( Debian 13).The problem with these and Dell OME has the same problem is that they often presume an Ubuntu LTS or a stable Debian and generally come very late as to support. That being said, usually you can unpack the latest package, unpack and manually...
-
Jjonahftw replied to the thread Proxmox VE Install and Boot problems with ASUS GT710 2gb Low Profile GPU.I got display output as normal, and after initating the installer freezes at "loading drivers" stage. When booting with the GPU installed on the motherboard and Proxmox already on de ssd, I got the most complete random errors, bust mostly just...
-
BBu66as replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..Das liegt am Realtek-Treiber. Der r8169 (der auch die RTL8125 bedient) unterstützt netpoll nur halbherzig bis gar nicht. Deswegen kommt der nc -u Test durch (normaler Netzwerk-Stack), aber /dev/kmsg → netconsole nicht (netpoll geht direkt über...
-
Ddaanw replied to the thread Proxmox VE Install and Boot problems with ASUS GT710 2gb Low Profile GPU.Doublecheck; you did boot the installer with nomodeset kernel parameter? I have some systems with ASUS GeForce GT 730 (GT730-4H-SL-2GD5) PCIe x1 4xHDMI passive cooled videocard that installs fine with nomodeset. Is it that card? What exactly...
-
RRaylane replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..Wenn ich den Befehl losschicke kommt leider wieder nur der 2. an. Sender: root@Raylane:~# modprobe -r netconsole root@Raylane:~# modprobe netconsole netconsole=6666@192.168.100.80/nic0,6666@192.168.100.192/bc:24:xx:xx:xx:xx root@Raylane:~# echo...
-
Nnpeca75 replied to the thread [nfs] how to use correct source address.@bbgeek17 , @j.theisen hi, sorry for late reply ok, here is config nfs: s1_vmbackups export /mnt/backup2 path /mnt/pve/s1_vmbackups server 2a00:e90:ffe:51e::c0a8:fedd content backup prune-backups...
-
Jjonahftw posted the thread Proxmox VE Install and Boot problems with ASUS GT710 2gb Low Profile GPU in Proxmox VE: Installation and configuration.I have been getting a very nice headache with this very specific problem or "bug" some might with a GPU making the Proxmox VE installer and OS boot for some reason. I think this could be a bug with the drivers that are included with the PVE...
-
Bburkinar posted the thread HP Agentless Management Service for proxmox VE 9 ( Debian 13) in Proxmox VE: Installation and configuration.Hi, Does anyone have installed HP Agentless Management Service for proxmox VE 9 ( Debian 13)? My server is an HPE gen 11, I can't find the good packages for this configuration.
-
Ccelemine1gig replied to the thread ASUS P9D-E/4L + RX 6700 XT prevents Proxmox from booting (black screen / blinking cursor).Your board has BMC video output capability. How did you configure the corresponding jumper (VGA_SW1) on the board? Where did you connect the cable to the actual phyiscal display? Aspeed (BMC) video output or the AMD card?
-
OOnslow replied to the thread How to upgrade from VE 9.1.1, Kernel: 6.17.2-1-pve to latest versions.With apt full-upgrade in place of apt upgrade :cool:
-
Ttmbiv56 posted the thread How to upgrade from VE 9.1.1, Kernel: 6.17.2-1-pve to latest versions in Proxmox VE: Installation and configuration.I am unsure of the upgrade path from VE 9.1.1, Kernel: 6.17.2-1-pve to latest versions. My VE hardware has been down for 6 months and I just now have it going again, and wanted to update it. I did apt update & apt upgrade. That got me to...
-
Philipp replied to the thread Proxmox Virtual Environment 9.2 available!.Where did they find version 9.2.3? -
Sssrt7626 reacted to briantho's post in the thread [SOLVED] Windows Guest Boot Hangs after Enabling Hyper-V in Windows Guest on 13th Gen Intel CPU with
Like.
This has been running for some time now, however for me this solution no longer seems to work. It seems somewhere it broke. I recently updated Proxmox to 9.2.3 and now my windows 11 vm that used to boot with host and hv_passtrough enabled no... -
Rrprengel posted the thread auto install missing answer file in Datacenter Manager: Installation and configuration.Hallo, Has anyone a link for a simple step by step tutorial. I try to test the auto install feature with a simple one disk vm using vmware workstation. The iso works and the setuop starts but stop with mssing answer file. Is there a way to...
-
WMy only point here is that the term “snapshot” has different meanings, heavily depending on the contextual point-of-view: PVE VM snapshot This is the native Proxmox function. It freezes the current status of a VM. This state can be “unfrozen”...
-
TTErxleben replied to the thread Bestehendes Proxmox von NoName 512GB SSD auf eine Samsung 980 PRO NVMe M.2 SSD, 1 TB SSD umziehen..Also entweder: Das hier mehrfach genannt Clonezilla mit evtl. nötiger Anpassung der Partitionen oder schmerzlose Neuinstallation auf dem neuen Medium und anschließendes Rückspielen, der vorher angefertigten Dump- oder PBS-Sicherungen. Oder du...
-
MMarkusKo replied to the thread ASUS P9D-E/4L + RX 6700 XT prevents Proxmox from booting (black screen / blinking cursor).It's possible that this combination of Mainboard/CPU (from 2014) and this GPU (from 2021) won't work together. I assume this GPU does not support legacy BIOS / CSM boot anymore, so you should use UEFI boot. What you can try: - remove ALL...
-
Eethit replied to the thread Renew Certificate task hangs (acme-renew-cert) after update to proxmox-backup-server 4.1.2-1 (AcmeApiConfig is not initialized).Looks like this bug is still present in 4.2.1. I just ran into the issue after setting up ACME on my PBS servers and the cert renewals were hanging. I'll switch to DNS long-term, but for the near future this is going to be annoying to deal with.