Latest activity
-
UdoB reacted to alexskysilk's post in the thread Hypervisor node freezes completely during backup with
Like.
You're likely starved for bandwidth. use rate limits to reduce the load. see https://pve.proxmox.com/pve-docs/chapter-vzdump.html#_bandwidth_limit -
LI have PVE host with 2 nvme drives, both are formatted in zfs and one is bootable - so extra bios and efi partitions. 2nd, non bootable drive is used as PBS storage. I have also an offline backup copies of VMs, including PBS lxc (stored on main...
-
MMadscientist replied to the thread ProxMox SDN.i have a hypothetical question, if anybody faced the situation kindly revert there is a healthy three node cluster with ceph installed, one 10g + one 1g switch is connected to the cluster, the 10g switch is for cluster + ceph network traffic...
-
Iimlk replied to the thread Proxmox + Older NVIDIA GPUs (GTX 1060 / P4000 / V100) LXC Passthrough Guide (Updated June 2026).580.159.04 is the latest driver which support nvidia v100, and DKMS compile failures on kernel 7 seems has been fixed in this version
-
Bbossanova808 replied to the thread Asymmetric Tailscale speed issue with Kernel 7 and multiple NIC types.So looks like Tailscale is releasing a workaround at their end: https://github.com/tailscale/tailscale/issues/19777#issuecomment-4694661648 ...but they do recommend cherry picking (the two!) changes if possible, and this may not only affect...
-
Wweskezm99 replied to the thread Change proxmox logo and link.after a few updates, I figured I would update this with a definitive one-liner that does consistently work for me. This updates the url tied to the top left corner logo to the root of the web server, so if you have a FQDN it will use that, or if...
-
BBu66as replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..Dein physisches Interface ist nic0 (das mit master vmbr0 in der Ausgabe, altname enx9c6b0031e1ee). Das ist dein Realtek 2.5GbE. Ist nicht von vfio versteckt, PVE bennent das manchmal um. Also: modprobe -r netconsole modprobe netconsole...
-
PPalathius replied to the thread Re-IP'd Hosts to a new network ssh finds old IP's and won't connect between hosts.Here is a synopsis of what we did as part of our Re-IP exercise. Proxmox Cluster IP Migration Summary Environment Proxmox VE 9.2.3 Two-node cluster: indi01 indi02 Original Management Network indi01: 192.168.2.222 indi02: 192.168.2.223...
-
Hhzk916 posted the thread All-in-One Offsite PBS with Integrated IPFire OpenVPN Appliance in Proxmox Backup: Installation and configuration.Subject: Guide / Success Story: (The AI Text, Thanks Grok) Hi everyone, I wanted to share a successful deployment of an all-in-one, plug-and-play offsite Proxmox Backup Server (PBS) solution. The goal was to build a self-contained box that could...
-
-
Kklabacita replied to the thread Proxmox 9.2.3 not sending email notification for degraded ZFS rpool.I have already noticed that this action does not generate any event and based on what I have read in other posts and groups. It seems that we need to create our own way to monitor this condition, which in my opinion is a high-priority event that...
-
Hhzk916 replied to the thread Remote PBS Backup.Wanted an off-site backup that was all-in-one. (PBS & VPN) I have built a proxmox backup server (PBS) to take offsite, can work in any location that has wired network. I Put the PBS inside a Proxmox Server where I also installed two other VM's...
-
-
tcabernoch reacted to Impact's post in the thread /etc/proxmox-backup/proxmox-backup.yaml with Like.
As far as I can tell this isn't a valid config file. I can't find references in the code either. So either I'm unable to properly search or the author or their LLM hallucinated something. strace or fatrace should be able to tell you for certain... -
Good day so I just upgraded my PVE host to version 9 and it worked super nice. pve8to9 gave no warnings or errors and so I figured the update will be fine. Which it was to 99.9% ;-) After this upgrade, my dmesg gets flooded with the messages like...
-
tcabernoch replied to the thread dmesg flooded by SysV generator.This is still a thing in PVE 9.2.3 Removing and reinstalling openipmi does not fix it. I guess the advice is still to ignore it. Ok.
-
Aaedancullen replied to the thread [SOLVED] QEMU exited with code 1 - PCIE Passthrough not working..It's the AGESA update that breaks it. The situation is similar on MSI PRO X870-P, where versions before MSI's update to pre-1.3.0.0 work (they do not require IOMMU identity mapping).
-
Ttbarker1989 replied to the thread [SOLVED] LXC/VM Migration errors..Based on your idea, I transitioned into looking into network related. Both machines were programmed for jumbo frames (9000 MTU) but one was in a switch not configured for jumbo frames. Moving to a switch with jumbo frames solved the issue. Thank...
-
tcabernoch replied to the thread PVE 9 apparmor errors.This appears to have worked. nano /etc/apparmor.d/usr.sbin.ntpd Insert this after the comments, before the code. Save. Reboot. abi <abi/3.0>, I have a 4 node ceph cluster. None of those had the ntpd file. I've not modified ntpd on these...
-
tcabernoch replied to the thread MSSQL Differential Backups, VSS, and PBS.This fix appears to have worked. The differential MSSQL backups are no longer corrupted.
-
Aalexskysilk replied to the thread Hypervisor node freezes completely during backup.exactly.
-
G_gabriel replied to the thread Proxmox 9.2.3 not sending email notification for degraded ZFS rpool.https://forum.proxmox.com/threads/no-email-notification-for-zfs-status-degraded.87629/post-385017 To check ZFS status at boot, you need a crontab @reboot
