Latest activity
-
BBu66as replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..Der nc Befehl ist okay. Das Problem ist vermutlich dass netconsole das Netzwerk-Interface nicht automatisch findet. Probier mal explizit mit Interface und MAC-Adresse vom Ziel: Erstmal auf dem LXC die MAC rausfinden: ip link show eth0 (oder wie...
-
G_gabriel replied to the thread NATed proxmox host, DSL with dynamic IP.accept_ra 2 seems ignored/overrided ( found in many PVE topics ) config below seems working here, (will confirm tomorrow ) on a host which was static IPv6. iface vmbr0 inet6 auto pre-up /sbin/sysctl net.ipv6.conf.vmbr0.accept_ra=2
-
UdoB reacted to SteveITS's post in the thread Ceph 3-node cluster, VM I/O freeze after node reboot/update with
Like.
Are you setting Ceph flags before reboot? And/or waiting for full recovery before updating/rebooting the second node? Our notes for updating PVE include: in Ceph set checkboxes for: (any node > Ceph > OSD > Manage Global Flags) nodeep-scrub... -
SteveITS replied to the thread Ceph 3-node cluster, VM I/O freeze after node reboot/update.Are you setting Ceph flags before reboot? And/or waiting for full recovery before updating/rebooting the second node? Our notes for updating PVE include: in Ceph set checkboxes for: (any node > Ceph > OSD > Manage Global Flags) nodeep-scrub... -
RRaylane replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..so ich hab auf einem meiner Proxmox Server einen LXC Container als 2. PC erstellt und die IP nun in den modprobe eingeben: root@Raylane:~# modprobe netconsole netconsole=@/,@192.168.100.192/ root@Raylane:~# auf dem "2. Rechner hab ich nun...
-
UdoB reacted to anna_pve_berlin's post in the thread Proxmox Cluster oder Backup Server oder andere Lösung with Like.
Ich würde die PBS-VM selbst und den PBS-Datastore nicht auf dasselbe Volume legen, wenn du es vermeiden kannst. Das trennt zwar keinen Hardwareausfall der Synology, aber es begrenzt Fehler durch volllaufende Datastores/Snapshots und macht...
-
UdoB reacted to Johannes S's post in the thread Proxmox Cluster oder Backup Server oder andere Lösung with Like.
Für die Sicherung auf der Synology auf jeden Fall. Ob man dann zusätzlich noch ein Backup auf dem Mini-PC hat, muss man sich halt überlegen. Vorteil wäre halt, dass man nicht nur ein Backup hätte. Wenn man den Zeitpunkt für die syncs richtig...
-
Ccrawrj replied to the thread Firewall Problem.OK, it looks like the issue was me not having a VMBR for the migration network. I created one on each host, reconfigured the firewall, and now it is working. Here is what I currently have. Cluster looks stable. Is there anything else I need to...
-
Rromek92 replied to the thread Opt-in Linux 7.0 Kernel for Proxmox VE 9 available.Do you have any new updates or solutions other than reverting to the previous kernel version?
-
TTErxleben replied to the thread Proxmox Cluster oder Backup Server oder andere Lösung.Sehe ich anders. Warum mehr Komplexität für einen vernachlässigbaren "Wurmfortsatz"? Backup eines fetten PBS ist auch schon per vzdump immer ein (Zeit)Problem, da ja bereits komprimiert. Schon die lokale, interne und schnelle Sicherung ist nicht...
-
BBu66as replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..OK, ACS-Override war's also nicht. Damit haben wir so ziemlich alles ausgeschlossen, was konfigurationsseitig schiefgehen könnte: IOMMU-Gruppen identisch, vfio-pci bindet sauber, alle Functions auf vfio-pci, kein ACS-Override, nur die RTX in...
-
Mmikeely replied to the thread How to split chunks and snapshots off into different storage repos?.Workflow is pretty simple: backup to local -> offload to s3 -> (outside PBS) sync s3 mutable bucket to s3 immutable bucket Restore is similar: sync s3 immutable bucket to s3 mutable bucket -> attach PBS to that bucket -> restore What I'm trying...
-
Mmikeely reacted to UdoB's post in the thread How to split chunks and snapshots off into different storage repos? with Like.
The term "snapshot" has multiple and technically different meanings, like four or five or so. "Somebody" should write an FAQ article we could point to...
-
UdoB replied to the thread How to split chunks and snapshots off into different storage repos?.The term "snapshot" has multiple and technically different meanings, like four or five or so. "Somebody" should write an FAQ article we could point to...
-
RRaylane replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..So hier die Daten vom vfio: root@Raylane:~# uname -r 7.0.6-2-pve root@Raylane:~# dmesg | grep -i vfio [ 12.161952] VFIO - User Level meta-driver version: 0.3 [ 12.184064] vfio-pci 0000:17:00.0: vgaarb: VGA decodes changed...
-
UdoB reacted to _gabriel's post in the thread How to split chunks and snapshots off into different storage repos? with Like.
argh ... not native English here. is not correct. ZFS special device stores metadata of all files and can store small files. There is no data in snapshots, they are about MBs , they are not the "diffirential data". Snapshots are "just"...
-
UdoB reacted to torbho's post in the thread When node "reboot" automatic "ceph osd set noout" command ? with Like.
Hello Francis, I think there may be a misunderstanding. With a normal reboot, setting noout is usually not required. When the OSDs on a node stop, they are first marked as down. They are only marked as out after the mon_osd_down_out_interval...
-
Ddgsnb reacted to Bu66as's post in the thread [SOLVED] PVE 8.4 zu 9.1.6 - Upgrade schlägt fehl with Like.
Freut mich dass es wieder läuft! Das passiert meistens wenn die Installation noch mit dem alten Installer gemacht wurde und die ESP nicht über proxmox-boot-tool registriert wurde. Ältere PVE-Versionen haben GRUB direkt installiert, ohne...
-
Pproxxie replied to the thread Backup error - Warning: unable to close filehandle GEN163 properly: Input/output error at /usr/share/perl5/PVE/VZDump/QemuServer.pm line 777.....pretty old post, this made my day :) THANKS I can confirm this error still happens with PVE 9.2.3 and kernel 7.0.6.2 and my pretty old but running Synology NAS devices DS218+ NFS V4 and DS413j NFS (w/o) forcing V4 The Solution was to...
-
Pproxxie reacted to kiotech's post in the thread Backup error - Warning: unable to close filehandle GEN163 properly: Input/output error at /usr/share/perl5/PVE/VZDump/QemuServer.pm line 777. with Like.
I encountered a similar error using SMB & proxmox 8.3.1. The problem was solved by using gzip compression mode instead of ZSTD. INFO: transferred 32.00 GiB in 127 seconds (258.0 MiB/s) zstd: /*stdout*\: Software caused connection abort...