Latest activity
-
bbgeek17 replied to the thread Fencing/failover for upstream and Ceph networks?.This topic has been brought up multiple times in the forum, but I do not recall if there was a good outcome, at this moment. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
Nneutron82 reacted to cpineirogar's post in the thread VM Migration between two Proxmox Clusters with
Like.
Update, in case anyone needs it, if you have 2 Proxmox clusters in Proxmox Datacenter Manager, you can migrate between clusters by choosing the remote destination, node, storage, and network. -
FHi, I am trying to configure an iSCSI bridge to a tape drive (ATTO XstreamCore 8100T) on my PBS 4.2.1. My tape is seen by the PBS: lsscsi -g [0:2:0:0] disk DELL PERC H730P Mini 4.27 /dev/sda /dev/sg0 [12:0:0:0] tape IBM...
-
aaron replied to the thread repo certificate mismatch?.download.proxmox.com should be accessed via http, not https. Which is reserve to enterprise.proxmox.com as you see in the certs details. The packages themselves are signed via GPG and verified with the key present on the host via the package... -
You cannot use https for non enterprise repositories. Change https to http to fix the errors. https only available for enterprise as it needs to do auth but all other repositories do not need auth and thus the proxmox staff have decided a long... -
JJeffthomson890 replied to the thread Proxmox and iSCSI storage issues.Thanks for sharing the outcome. This is a useful finding for anyone testing HA with shared iSCSI storage. One additional recommendation for POC environments is to perform repeated failover and failback testing after changing the storage...
-
Daniel-Doggy replied to the thread repo certificate mismatch?.You cannot use https for non enterprise repositories. Change https to http to fix the errors. https only available for enterprise as it needs to do auth but all other repositories do not need auth and thus the proxmox staff have decided a long... -
YaZoal replied to the thread [SOLVED] System Log - Live Mode stopped working.Thanks for sharing the workaround. You can mark the thread as solved by editing your post and selecting '[SOLVED]' from the drop-down menu next to the title. -
JThis article may be of some help: https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/ Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
-
JJeffthomson890 reacted to j.theisen's post in the thread Proxmox and iSCSI storage issues with Like.
Ok, glad you figured that out on your own! For future reference there is a small guide on the possible ways to attach a SAN-type storage to Proxmox, see [1] [1] https://pve.proxmox.com/wiki/Migrate_to_Proxmox_VE#Storage_boxes_(SAN/NAS)
-
JJeffthomson890 reacted to southwalesowl's post in the thread Proxmox and iSCSI storage issues with Like.
@j.theisen Please don't spend anytime on this I am going to more this volume and start again with a non thin LVM
-
JJeffthomson890 reacted to southwalesowl's post in the thread Proxmox and iSCSI storage issues with Like.
@j.theisen. I have just read that LVM-Thin is NOT supported/recommended for shared iSCSI in a cluster (especially with HA). Metadata is not cluster-aware and this kind of corruption is a known risk. I am running LVM-Thin in this configuration...
-
JJeffthomson890 reacted to southwalesowl's post in the thread Proxmox and iSCSI storage issues with Like.
Hi Jonas, Thanks for the reply. Outputs attached.
-
JJeffthomson890 reacted to j.theisen's post in the thread Proxmox and iSCSI storage issues with Like.
Hi @southwalesowl thanks for posting in the forum! Can you please share your /etc/pve/storage.cfg and the journal for the time period of the simulated outage for both hosts? Yours sincerely Jonas
-
JJeffthomson890 reacted to southwalesowl's post in the thread Proxmox and iSCSI storage issues with Like.
I have 2 Proxmox hosts configured and an additional QDevice so that I can configure HA. Each host has 4 physical NICS. I have 2 of them configured with static I.Ps, on different subnets, for iSCSI and I have multipathing configured. I have HA...
-
Ffant replied to the thread Probleme mit apcupsd.Danke für den Tipp - ich hatte exakt das gleiche Problem. Update des Kernels - Alles gut.
-
JJeffthomson890 reacted to etfz's post in the thread Fencing/failover for upstream and Ceph networks? with Like.
I see. Are there any goto solutions? I feel like this should be a fairly common scenario.
-
JJeffthomson890 reacted to bbgeek17's post in the thread Fencing/failover for upstream and Ceph networks? with Like.
Hi @etfz , As far as I know there is no network or storage monitor integrated into default PVE cluster distribution. You will need to create your own. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
-
JJeffthomson890 reacted to etfz's post in the thread Fencing/failover for upstream and Ceph networks? with Like.
Hi, I have a cluster with separate networks for VM upstream traffic, Ceph and corosync. When a host loses corosync connectivity, fencing kicks in, as expected, but can I do the same for the VM and Ceph networks? A host without upstream or Ceph...
-
JJeffthomson890 reacted to gfngfn256's post in the thread [SOLVED] Are SSD NVMe issues resurfacing with the latest PVE kernel upgrade? with Like.
AFAIK that doesn't have any m.2 native controller/connection. You must be using some PCI-riser card as a controller - or some other shenanigans through something else. (A waste of that m.2 Gen 4 drive!). But my point being - I'm not sure you are...