Latest activity

  • E
    I see. Are there any goto solutions? I feel like this should be a fairly common scenario.
  • J
    We can share the resulting disk image between clusters via shared storage, but that does not establish template machine definitions in these clusters where we'd like to be able to "clone" from - think Hardware settings, cloud-init parameters...
  • Falk R.
    Ob du das virtuell oder Physisch betreibst ist erst einmal egal. Da würde ich mir mal die Carp Konfigurationen anschauen. Eigentlich sollte die interne FW nichts mitbekommen. Eventuell hast du auch etwas extremes Logging aktiv? Die beste Hilfe...
  • S
    southwalesowl reacted to bbgeek17's post in the thread Proxmox and iSCSI storage issues with Like Like.
    This article may be of some help: https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/ Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
  • R
    The Samsung 990 Pro SSDs are fixed using firmware upgrade: NVMe SSD-990 PRO Series Firmware *(8B2QJXD7) To improve read-operation stability. (Release : December 2025) *(7B2QJXD7) To address the intermittent non-recognition and blue screen issue...
  • bbgeek17
    Hi @etfz , As far as I know there is no network or storage monitor integrated into default PVE cluster distribution. You will need to create your own. Cheers Blockbridge : Ultra low latency all-NVME shared storage for Proxmox -...
  • K
    After an update today, promox is assigning/using hr vfio-pci driver when it should. I have a NIC that it is doing this to. 8c:00.0 0200: 15b3:1007 Subsystem: 15b3:0006 Physical Slot: 7 Flags: fast devsel, IRQ 901, NUMA...
  • G
    I managed to fix my talos cluster by running the following (or adding the args line manually to the config): qm set 195 --args '-global virtio-net-pci.host_tunnel_csum=off -global virtio-net-pci.csum=off'
  • E
    Hi, I have a cluster with separate networks for VM upstream traffic, Ceph and corosync. When a host loses corosync connectivity, fencing kicks in, as expected, but can I do the same for the VM and Ceph networks? A host without upstream or Ceph...
  • bbgeek17
    You can use Rescue Boot from the installation media and inspect the situation. https://pve.proxmox.com/pve-docs/chapter-pve-installation.html#installation_installer
  • YaZoal
    YaZoal replied to the thread Quorum angry.
    Seems similar to: https://forum.proxmox.com/threads/pve-cluster-lost-quorum.138901/post-621070 Double check the corosync.conf file if corosync_votequorum is included.
  • bbgeek17
    The unattended upgrades often lead to these types of posts in a forum: I had a power outage, all my host rebooted and now something is not working. I have not changed a thing! Oh there was a Kernel and QEMU and "something" upgrade a month ago...
  • W
    Here a short update: today i tried again to run my Lenvo m715q with the latest kernel 7.0 - but again after about one hours it freezes completely. A connected monitor and keyboard showed that the system did not responce, even no keyboard was...
  • bbgeek17
    This article may be of some help: https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/ Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
  • bbgeek17
    Hi @jtru , what are the exact issues are you trying to solve? Can you elaborate what are the remaining parts for you? Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
  • dcsapak
    dcsapak replied to the thread PBS and iSCSI Tape drive.
    what is the output of the pbs commands? what is the output of proxmox-tape status --drive <drive> ?
  • M
    mpit reacted to jtru's post in the thread One set of templates, multiple clusters with Like Like.
    Since our migration away from VCF and onto PVE, we've successfully remodeled template creation (both for containers using debootstrap and qemu VMs using hashicorp's packer) for the new environment, but are scratching our heads what's the most...
  • J
    Hi @fes-it-admin thanks for posting in the forum! Disclaimer: I haven't done any extensive digging into the root cause of the problem, but as a "quick to try" hunch: Try to disable the shared memory Features of the H240ar in the device...
  • M
    I have made bad experiences with LVM caching. It add another layer on the already very complex storage layers of LKVM and LVM thin. My server crashed every few months and I saw access issues to some dm devices. I decided to remove the cache as...
  • A
    That's a terrible idea and spoken like a true dev (who thinks that anybody can be a developer and thus take your job). Non-developers shouldn't be developing anything because it will most certainly be bad. I wouldn't want to be a dev anymore...
    • Screenshot_2026-06-09_07-36-15.png
    • Screenshot_2026-06-09_07-45-10.png
    • Screenshot 2026-06-08 191013.png
    • Screenshot 2026-06-08 192303.png