Latest activity
-
Nnethub replied to the thread Unable to destroy LXC container after CloudPanel installation (Logical volume contains a filesystem in use).Please find attached the output generated from running the command below: grep vm--101--disk--0 /proc/*/mounts
-
BBalcony7199 posted the thread How to boot an existing VM with a live ISO? in Datacenter Manager: Installation and configuration.Hello this is probably a dumb question but I'm having trouble understanding how to do this. I have an Ubuntu server VM that I accidentally gave 3000GB of space instead of 300GB and the partition I'm trying to shrink inside the VM is an LVM that's...
-
Uunblinded reacted to jdancer's post in the thread Server hardware recommendations for new 3–4 node Proxmox VE / Ceph cluster with
Like.
At work, been migrating 13th & 14th-gen Dell VMware clusters over to Proxmox Ceph. Swap out the PERC RAID controllers for Dell HBA330s IT-mode controllers, since Ceph/ZFS don't work with RAID controllers. If I was buying new, I will go with... -
Ssnino replied to the thread Host Freeze When GPU Passthrough VM Reboot.Are some AMD generations generally free of this issue? I also ran into the same reset problem with an RX 5500 XT, so I'm wondering if it's still affecting newer RDNA cards or if I was just unlucky with that particular setup.
-
Hhvisage replied to the thread Proxmox reboots after "Purging GPU memory".Intel(R) Celeron(R) CPU N3150 @ 1.60GHz after kernel 7.0 upgrades, I got hit by this GPU purging bug thingy ;( I've been hit with it before, can't recall what I changed back then. I had like 50% RAM free in a 16GB system, yeah seemed swap (on...
-
HHarryGi reacted to Onslow's post in the thread Replacement faulty HDD which is part of a ZFS data volume with Like.
After this point I would add this: If possible, stop the VMs and LXCs. Or before powering down the server disable autostart of VMs and LXCs. To reduce the load of the host and the risk.
-
RRice and Soy Sauce replied to the thread Upgraded from 8.4 to 9.x - two main issues from webgui.When I try to login at the physical console, after entering root at the login prompt and pressing enter, it returns me right back to the login prompt again. No prompt for password.
-
bbgeek17 replied to the thread Upgraded from 8.4 to 9.x - two main issues from webgui.What about physical console? It's possible that you ran out of space. Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox -
RRice and Soy Sauce replied to the thread Upgraded from 8.4 to 9.x - two main issues from webgui.I tried to SSH from putty. I'm allowed to enter the password but immediately get a popup from putty saying 'Remote side unexpected closed network connection.'
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.@t.lamprecht Don't you use the GlusterFSPlugin.pm to be able to add the GlusterFS storage backend (if you're adding it via the PVE GUI)?
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.@kayson just told you that Debian (which PVE is built on top of) is testing GlusterFS 11.2 three months ago. Since Proxmox VE 8.4, the 6.14 kernel has been made available as an option.This kernel version is derived from Ubuntu 25.04. (Source...
-
-
Ttbarker1989 posted the thread [SOLVED] LXC/VM Migration errors. in Datacenter Manager: Installation and configuration.I had this working perfectly on a lower version. I think 0.8 or 0.9 of PDM and my PVE servers were version 8. Now they are both version 9.2.3 and PDM version is 1.1.1 I get the same error when I try to migrate a vm/lxc from host 1 to host 2 or...
-
Ccomplexplaster27 reacted to dan291r's post in the thread VM Reboot Issue - VM stuck on Proxmox start boot option screen with Like.
It worked for me !!! Men you just saved my life !!!! 2 days im on this problem with a critical server out of production ........Thank you so much !!
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.Oh....there are a lot of things that you clearly don't understand neither, which I've already outlined previously. I mean, you're literally arguing with the ceph devs - to which I say, "good luck with that one". e.g. middleware (Which you can...
-
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.100% agree. My point is that Proxmox dropping support for Gluster because QEMU is dropping the libgfapi where it treats it as a block device rather than as a FUSE-base client just provides more data demonstrating the silliness of Proxmox...
-
RRice and Soy Sauce replied to the thread Upgraded from 8.4 to 9.x - two main issues from webgui.I didn't copy any error logs out at the time. Currently, I can't login from the node console, ssh immediately disconnects, and shell access is not available. I think my only available option at this point may be to just scrap it and reinstall a...
-
bbgeek17 replied to the thread Upgraded from 8.4 to 9.x - two main issues from webgui.Hi @Rice and Soy Sauce , Since you mentioned "some hiccups" it would have been great if you provided some information on what those were. Any log outputs from the upgrade time would help as well. In general, given potential upgrade issues, this...
-
Ddaanw replied to the thread Install Proxmox VE on ARM64 host.See: https://forum.proxmox.com/threads/proxmox-ve-on-aarch64-arm64.182409/ https://bugzilla.proxmox.com/show_bug.cgi?id=1314 https://bugzilla.proxmox.com/show_bug.cgi?id=5764
-
RRice and Soy Sauce posted the thread Upgraded from 8.4 to 9.x - two main issues from webgui in Proxmox VE: Installation and configuration.Update: I ended wiping and start with a fresh install. Hi all, I updated all existing updates on my 8.4.19 then upgraded to 9. A few hiccups along the way but it completed. Now, when I connect via the webgui, I'm not able to use Shell on the...
-
AAdrien_D posted the thread Install Proxmox VE on ARM64 host in Proxmox VE: Installation and configuration.Hello, Just got a MINISFORUM MS-R1, an ARM64 machine with CP8180 CPU (ARM64 architecture) I want to test Proxmox on ARM64. I didn't find ISO and i saw on repositories that arm64 looks available on pve-test repo. After installing a clean Debian...
