Latest activity
-
dcsapak replied to the thread USB microphone passthrough: recognized, but does not work.hi, this is probably not easy to debug, but one thing that could help is to try the microphone with a linux guest (if it works at all on linux). If it also does not work there the journal from the host and the guest might be helpful to see what... -
Ppmbaeum posted the thread Win Server 2025 VM: DPC_WATCHDOG_VIOLATION 0x133 after upgrade to Kernel 7.x in Proxmox VE: Installation and configuration.I recently ran into a problem that gave me quite a headache, and since I haven't fully resolved it yet, I wanted to share my findings here and ask if anyone has seen something similar. Environment PVE9.2.3, Kernel 7.0.2-7-pve (since...
-
Cchralt replied to the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine.Moin, Die 64 GB im /mnt sind nun weg, da lagen einige Backups, die eigenlich auf die USB-Festplatte gehören - wo sie auch sind.. Leider hat das aber nicht ein dem Problem mit dem nicht sprechen VM geändert. Wundert mich auch nicht, da die...
-
fiona replied to the thread Kubernetes overlay networking breaks when upgrading from PVE 9.1 to PVE 9.2.3.Hi @xrobau, seems like this does not work on our local reproducer. Are you sure that you have the same issue and it was not just the interface being down for you? Or maybe there was still some effect from an earlier command you tried active... -
shanreich replied to the thread Asymmetric Tailscale speed issue with Kernel 7 and multiple NIC types.The fix should be available in all repositories with kernel version 7.0.6-2 [1] [2]. [1] https://git.proxmox.com/?p=pve-kernel.git;a=commit;h=d2d9756ca14a15139aab070d98572ec11537c30c [2]... -
shanreich replied to the thread SDN EVPN zone stuck "pending" on a single node.Can you post your configuration files from the offending node? cat /etc/network/interfaces cat /etc/network/interfaces.d/sdn
-
and why shut this work with two interface names on one vmbr0? what about a nic0, nic1 -> bondX -> vmbr0 setup with some bond mode? # https://pve.proxmox.com/wiki/Network_Configuration -
UdoB replied to the thread ProxMox SDN.I do not use SDN, so I can not help. For "risky" experiments (originally with Ceph, in my case) I've setup a virtual PVE cluster. Inside that cluster one can run dangerous experiments without the fear to destroy something important - just create...
-
dakralex reacted to t.lamprecht's post in the thread Proxmox Virtual Environment 9.2 available! with
Like.
Even then, AMD <-> Intel live migrations can break due to too many subtle differences and vendor-specific optimizations to guarantee that this could work independent of the used vCPU type; some types (like host) will make breakage much more... -
Look at Datacenter --> HA --> Affinity Rules --> HA Node Affinity Rules. Read about the "Strict" flag shown there. Probably you can create two rules, one with the AMD nodes and one with the Intel nodes. Select the VMs to be "in" the...
-
When using iSCSI with Proxmox, it is generally used as LVM over iSCSI. In this case, LVM is provisioned using Thick provisioning, not Thin provisioning. Note that Snapshots are provided as snapshot-as-volume-chain, which differs from typical...
-
UdoB replied to the thread PVE9.2 Mount ISCSI.See also: https://pve.proxmox.com/pve-docs/chapter-pvesm.html#_storage_types for a top level overview.
-
Dd.oishi replied to the thread PVE9.2 Mount ISCSI.When using iSCSI with Proxmox, it is generally used as LVM over iSCSI. In this case, LVM is provisioned using Thick provisioning, not Thin provisioning. Note that Snapshots are provided as snapshot-as-volume-chain, which differs from typical...
-
fiona replied to the thread Updated to 8.2 - DMA error.Oh, so I don't count as an actual developer? In fact, most of the devs do read and answer in the forum regularly ;)
-
news replied to the thread No internet in new LXCs.and why shut this work with two interface names on one vmbr0? what about a nic0, nic1 -> bondX -> vmbr0 setup with some bond mode? # https://pve.proxmox.com/wiki/Network_Configuration -
Rrprengel replied to the thread Benchmark für Windows-VMs gesucht.Du müsstest schon beschreiben was die VM funktional liefern soll. Persönlich empfehle ich synthetische Tests mit z.B. RobotMK um User-Interaktionen zu simulieren. Da sieht man dann zügig ob Wunsch und Wirklichkeit zueinander passen,
-
GGrueziwoll beinand, sagt mal, wenn Ihr auf einem neuen System eine VM aufsetzt, prüft Ihr das ganze auch auf Geschwindigkeit? Ich meine, nur rumklicken auf der Oberfläche verrät ja nichts über die Geschwindigkeit einer VM und damit, ob sie...
-
MMadscientist replied to the thread ProxMox SDN.very few article is available in details .... all are like over the counter type ....... only thing visiable is "contact us" https://www.virtualizationhowto.com/2024/03/proxmox-sdn-configuration-step-by-step/...
-
PPr_Minix replied to the thread Übersichtsanzeige.Aah, ok, dann ist das eben so. Vielen Dank.
-
MMichalCirrus posted the thread Memtest as default rEFInd option after upgrade to PVE 9.2 in Proxmox VE: Installation and configuration.Server with: pve-manager/9.2.3/d0fde103346cf89a (running kernel: 7.0.6-2-pve) when booted goes into memtest. Main menu looks like this: How to remove memtest from this menu or move memtest under systemd-bootx64?
-
