Latest activity
-
When using iSCSI with Proxmox, it is generally used as LVM over iSCSI. In this case, LVM is provisioned using Thick provisioning, not Thin provisioning. Note that Snapshots are provided as snapshot-as-volume-chain, which differs from typical... -
UdoB replied to the thread PVE9.2 Mount ISCSI.See also: https://pve.proxmox.com/pve-docs/chapter-pvesm.html#_storage_types for a top level overview.
-
Dd.oishi replied to the thread PVE9.2 Mount ISCSI.When using iSCSI with Proxmox, it is generally used as LVM over iSCSI. In this case, LVM is provisioned using Thick provisioning, not Thin provisioning. Note that Snapshots are provided as snapshot-as-volume-chain, which differs from typical...
-
fiona replied to the thread Updated to 8.2 - DMA error.Oh, so I don't count as an actual developer? In fact, most of the devs do read and answer in the forum regularly ;) -
news replied to the thread No internet in new LXCs.and why shut this work with two interface names on one vmbr0? what about a nic0, nic1 -> bondX -> vmbr0 setup with some bond mode? # https://pve.proxmox.com/wiki/Network_Configuration -
Rrprengel replied to the thread Benchmark für Windows-VMs gesucht.Du müsstest schon beschreiben was die VM funktional liefern soll. Persönlich empfehle ich synthetische Tests mit z.B. RobotMK um User-Interaktionen zu simulieren. Da sieht man dann zügig ob Wunsch und Wirklichkeit zueinander passen,
-
GGrueziwoll beinand, sagt mal, wenn Ihr auf einem neuen System eine VM aufsetzt, prüft Ihr das ganze auch auf Geschwindigkeit? Ich meine, nur rumklicken auf der Oberfläche verrät ja nichts über die Geschwindigkeit einer VM und damit, ob sie...
-
MMadscientist replied to the thread ProxMox SDN.very few article is available in details .... all are like over the counter type ....... only thing visiable is "contact us" https://www.virtualizationhowto.com/2024/03/proxmox-sdn-configuration-step-by-step/...
-
PPr_Minix replied to the thread Übersichtsanzeige.Aah, ok, dann ist das eben so. Vielen Dank.
-
MMichalCirrus posted the thread Memtest as default rEFInd option after upgrade to PVE 9.2 in Proxmox VE: Installation and configuration.Server with: pve-manager/9.2.3/d0fde103346cf89a (running kernel: 7.0.6-2-pve) when booted goes into memtest. Main menu looks like this: How to remove memtest from this menu or move memtest under systemd-bootx64?
-
-
news replied to the thread No internet in new LXCs.Please show your network Setup, because you don't use the bond Setup
-
Wwoma replied to the thread No internet in new LXCs.If you can ping your gateway 192.168.1.1 your LXC is OK as gateway is already located outside of PVE. So if your routers do not block anything of this client / IP you should be fine. Maybe some old entries that belong to this IP?
-
news replied to the thread No internet in new LXCs.Please show you lxc configuration.
-
Aanna_pve_berlin replied to the thread Promox Oberfläche und Plex LXC nicht erreichbar, VMs aber schon.Wenn die Windows-VM auf derselben NIC weiter erreichbar ist, würde ich zuerst trennen zwischen „Netzwerk weg“ und „Host-Dienste hängen“. Beim nächsten Auftreten per vPro/Console prüfen: - ist der PVE-Host noch per ping/ssh erreichbar? - laufen...
-
JHello Everyone PVE9.2 mount iscsi, Does support Thin Provisioning and Snapshots ？ from 9.0. if use iscsi protocol, allow use snapshot. but i don't whether allow use thin provision ? thanks
-
UdoB reacted to buildmylab's post in the thread Feedback wanted: lightweight NOC monitoring for Proxmox VE and homelab environments(Apologies if this is the wrong section — please redirect if neede) with
Like.
Hi everyone, I’m working on a lightweight NOC monitoring platform called OPSHOME NOC, and I would like to get some feedback from Proxmox VE users, especially from homelab and small infrastructure environments. The idea is to provide a simple... -
EllerholdAG replied to the thread Proxmox / Ceph / Backups & Replica Policy.So Just using the command above would do nothing? Because the clients dont know which osd to contact? -
EllerholdAG reacted to fstrankowski's post in the thread Proxmox / Ceph / Backups & Replica Policy with Like.
Exactly why i proposed the change back in 2025.
-
driley reacted to ltctech's post in the thread High VM-EXIT and Host CPU usage on idle with Windows Server 2025 with Like.
Adding my findings from testing Windows Server 2025 / Windows 11 VBS guests on a mixed Intel Proxmox cluster. Cluster CPUs involved in my testing: Cascade Lake: Intel Xeon Gold 6244 @ 3.60 GHz Ice Lake: Intel Xeon Gold 6348 @ 2.60 GHz Emerald...
