Latest activity
-
VHello, please read openzfs encryption too. on the net are many references about this. Our is: # https://openzfs.org/wiki/ZFS-Native_Encryption And see the result of a search: # https://openzfs.org/w/index.php?search=Encryption I use outside...
-
Vvirtualizerforlife replied to the thread How to encrypt new disk in PVE?.thank you So I have my PVE installed on top of debian with luks on the main disk but how do I get get my second disk encrypted with luks and then attach it to pve?
-
VThe more generic way e.g. used by the Debian installer is cryptsetup +LUKS ( e.g. you can follow https://reintech.io/blog/configuring-luks-encrypted-disk-debian-12 ) I would not recommend to use encryption within the VMs, you will need to handle...
-
VI am using ZFS exclusively, so I can not (and should not) say much about the other storage solutions. Encrypting a disk from the inside of a VM? Sounds wrong to me as it adds additional attack vectors and key management problems. From my...
-
Mmaxim.webster replied to the thread Recommended hardware for modest upgrade of 3 PVE nodes.To close this thread properly: I went the CWWK way and ordered 3 pieces of 11th Generation Boards with i5 CPU. With 4C/8T APU, 4x 2.5GbE and the option to re-use existing DDR4 memory and other hardware, it was the most reasonable way to gain...
-
PBei der Ûbersichtsanzeige einer VM zeigt mir Proxmox an: CPU 1% und RAM verbrauch 7,2 von 8,8GB Der Taskmanager von Ubuntu zeigt CPU 2 bis 3 %, aber RAM nur 1,5 von 8,5GB an. Ist das so ok? Proxmox 8.3.3 auf N100 , 4CPU, 16GB
-
Aalexskysilk replied to the thread [SOLVED] One node cant access NAS shared storage.continuing diagnostics: ping 10.0.0.4 (look for time anomalies) showmount -e 10.0.0.4 attempt to mount -vvv //10.0.0.4/mnt/bertha/pvebackup (assuming you see it in showmount) manually. paste the output here.
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.This supposes and/or assumes that qm(1) uses qemu's native support for gluster, but that's not actually necessarily true, is it? Again, unless I'm missing something here -- qemu img-create is not the same thing as pvesm alloc. right? If I'm...
-
JJayK replied to the thread [SOLVED] One node cant access NAS shared storage.Interfaces file: auto lo iface lo inet loopback iface eno1 inet manual iface eno2 inet manual auto enp2s0f0 iface enp2s0f0 inet static address 10.0.1.4/24 #Corosync auto enp2s0f1 iface enp2s0f1 inet static address 10.0.2.4/24...
-
Yyunmkfed replied to the thread Proxmox hangs after upgrade to v9.I finally created a write up to document my story: https://www.alanbonnici.com/2026/05/when-your-cpu-dies-my-journey-with.html
-
Jjdancer replied to the thread Server hardware recommendations for new 3–4 node Proxmox VE / Ceph cluster.At work, been migrating 13th & 14th-gen Dell VMware clusters over to Proxmox Ceph. Swap out the PERC RAID controllers for Dell HBA330s IT-mode controllers, since Ceph/ZFS don't work with RAID controllers. If I was buying new, I will go with...
-
Rrct posted the thread Occasional inbound SMTP timeout, postscreen_cache: unable to get exclusive lock: Resource temporarily unavailable in Mail Gateway: Installation and configuration.I'm trying to track down the source of occasional SMTP timeouts for inbound connections. The connection is accepted but the real SMTP greeting is never sent. The timeouts correlate to these error in the logs: 2026-06-06T22:47:03.519916-04:00...
-
Wwirez replied to the thread Web gui not working after 8 to 9 upgrade.root@pve:~# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo...
-
Wwirez posted the thread Web gui not working after 8 to 9 upgrade in Proxmox VE: Installation and configuration.Hi, I did an in place upgrade from version 8 to 9 and now I can't seem to access the web gui. The autostart VMs start up and I can get ssh access to proxmox. I tried troubleshooting from prior posts but having no luck so far. Can anyone please...
-
JJohannes S reacted to news's post in the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine with
Like.
Ich biete Dir noch dieses Bash-Script an, welche alle Installationseste des Debian Sysstem enfernt. for f in $(dpkg -l | grep "rc " | cut -d " " -f 3); do echo $f; apt purge -y $f; done Das löscht mehr, als man erwartet. -
SI've been having this weird issue today. I've tried rebooting my server several times, and have read quite a few posts to no avail. My LXCs and VMs have internet but if I try to create a new LXC, I have no internet. Not a DNS issue either, as...
-
-
Ddrxenonbloom replied to the thread [noob needs help] Can't get Proxmox working with Linstor DRBD.Did you get this figured out? I just set up a Linstor cluster with 2 PVE storage nodes and my Raspi 4 (which had already been serving as my PVE HA qdevice) as a the Linstor controller as well diskless tiebreaker node for Linstor quorum. My PVE...
-
TTErxleben replied to the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine.Zeigt dir aber nicht, welche veralteten Pakete nur noch im System rumlümmeln.
-
JJohannes S reacted to TErxleben's post in the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine with Like.
Wie @ThoSo sagte, müllt dir /mnt gerne dein / zu, wenn ein PVE dorthin Daten schreibt, während irgendwas nicht gemountet ist. Also dort alles unmounten und nochmal prüfen, wieviel Speicher der Ordner belegt. Sollte kaum messbar sein... P.S...
-
21Matze replied to the thread [SOLVED] Kein Zugriff auf Konsole einer Virtuellen Maschine.systemctl list-units --type=service da werden Server Dienste geprüft online sind oder offline sind dieser geht bei Debian oder Ubuntu apt install htop htop aufrufen und prüfen was da lost ist im System
