Latest activity
-
Jjabuzzard replied to the thread Server hardware recommendations for new 3–4 node Proxmox VE / Ceph cluster.Where did I suggest that other vendors' firmware was "better"? What I said is based on the frequency of updates to Dell/Lenovo/HPE firmware and the absolutely minimal, if any, updates for Supermicro firmware; then, in the current cybersecurity...
-
SSelfMan replied to the thread Proxmox 6.8.12-9-pve kernel has introduced a problem with e1000e Driver and network connection lost after some hours.I am running PVE 9.2.3 for few weeks now. It uses the Linux 7.0.6-2-pve (2026-05-29T11:08Z) kernel and I had no issues so far. But also I still have the offload turned off and the reset script running. If you need more detail, I can provide that...
-
Jjabuzzard replied to the thread Server hardware recommendations for new 3–4 node Proxmox VE / Ceph cluster.I think anything is going to be horribly over budget right now. The AI bubble has made RAM and SSDs, in particular, very expensive, and there are pandemic-level delays for ConnectX network cards. Even though our order was placed in a mad scramble...
-
Ttimresi replied to the thread SDN Access rights.Tell me if this is suppose to work : I created a new role, SDN-Role, with theses privileges : SDN.Audit, SDN.Allocate, SDN.Use, Sys.AccessNetwork, Sys.Audit Then I created a new permission, with the path /sdn/zones/my-zone , the group with my...
-
ggoller replied to the thread SDN BGP Controller - How to tune BFD parameters?.Sadly this is currently not possible because we only merge "sections" that we also create. So bfd sections won't be added -- we're working on this. -
TTomNick replied to the thread Boot problem after update.This is it. Thank you
-
TMaybe it's this: https://pve.proxmox.com/wiki/Upgrade_from_8_to_9#GRUB_Might_Fail_To_Boot_From_LVM_in_UEFI_Mode ?
-
Wwerter replied to the thread [Feature Request] Proxmox 9.0 - iothread-vq-mapping.@spirit This feature is really, really important for NVMe drives
-
Jj.theisen replied to the thread A PVE v7 install gets corrupted to the point of hanging regularly (would like some input).Hi @kernull thanks for posting in the forum! First of all i have to stress the fact that PVE 7 is EOL since 07/2024 and such poses a security risk. Please consider upgrading to PVE 9. To answer your question, we need a little more details on...
-
Wwerter replied to the thread [Feature Request] Proxmox 9.0 - iothread-vq-mapping.@spirit Please hear our request!
-
cheiss replied to the thread Proxmox 9 and nftables status.First, please post the output of pveversion -v, best from all three nodes. Does /usr/libexec/qemu-server/dbus-vmstate exist on your systems? This is a prerequisite helper for conntrack state migration. No, conntrack state migration is possible... -
SSteen_A replied to the thread IO Pressure Stall issue after upgrade to 9.1.Hi Fiona I think you can be right about your assumption because this VM has been there in Proxomx 8.x too However I do not really understand your suggestion. I did turn on "SSD Emulation" on and that solved the problem with the very high IO...
-
Wwerter replied to the thread [Feature Request] Proxmox 9.0 - iothread-vq-mapping.@dominiaz They're ignoring you :mad:
-
Wwerter reacted to dominiaz's post in the thread [Feature Request] Proxmox 9.0 - iothread-vq-mapping with
Like.
I’d be thrilled to see my patches merged into the official Proxmox repository. -
Wwerter replied to the thread [Feature Request] Proxmox 9.0 - iothread-vq-mapping.@fiona Hi! Just one question - when??
-
shanreich replied to the thread [SOLVED] SDN error status.It seems like you still have an IP address configured on vmbr0: 10.7.20.10/24 which causes the ifquery check to fail. Is this a leftover from a previous configuration, since you seem to have the same subnet configured as well on vmbr0.20? In... -
Ddominiaz replied to the thread [Feature Request] Proxmox 9.0 - iothread-vq-mapping.I’d be thrilled to see my patches merged into the official Proxmox repository.
-
Mmcpdev80 reacted to ciax's post in the thread LLMs auf Proxmox mit AMD AI CPUs (Strix): iGPU funktioniert – NPU aktuell nicht with Like.
Wunderbar, nach ein paar Schwierigkeiten anfangs hat es nun auch geklappt - Danke für die Tipps! # flm validate [Linux] Kernel: 6.17.13-1-pve [Linux] NPU: /dev/accel/accel0 with 8 columns [Linux] NPU FW Version: 255.0.11.69 [Linux] amdxdna...
-
44ge78f3ff replied to the thread Anpassung des Spam-Reports.Niemand eine Idee hierzu? oder auch gerne Alternativen zur Umsetzung
-
Eetfz replied to the thread [SOLVED] SDN error status.Certainly. [ { "name": "lo", "addr_method": "loopback", "addr_family": "inet", "auto": true, "config": {}, "config_status": {}, "status": "pass" }, { "name": "ens2f1np1", "addr_method": "manual"...