Latest activity
-
Mmason64 posted the thread Changed IPs on my cluster before reading anythings in Datacenter Manager: Installation and configuration.Hi, I made a bit of a mistake :) I changed my ips on my two nodes which were on a 10.0.0.x, for reasons i had to change my network to 192.168.1.x, Stupidly i thought i could just go in to each node on my cluster and change ip in the GUI and...
-
DDomino replied to the thread Glusterfs is still maintained. Please don't drop support!.Thats good to know! Thanks! I've always just ran a strip of thermal across the lot. Although in this case it is a U.3 drive, so not really something you think about regarding opening and re-padding, plus with it being a Samsung pm1733, they do...
-
DDomino reacted to alpha754293's post in the thread Glusterfs is still maintained. Please don't drop support! with
Like.
Sorry to hear about that man. That really sucks! (If you ever need me to run the CFD studies for you, just hit me up. I've already studied the optimal placements for thermal pads (on NVMe SSDs), using CFD. (It's better if you place individual... -
DDomino reacted to alpha754293's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
Right. Again, this is why I tested both, on the same physical box and with six HDDs rather than just three. That way, three can be assigned/dedicated to ceph and the other three can be assigned/dedicated to gluster so they don't "criss-cross"...
-
Jjabuzzard replied to the thread Server hardware recommendations for new 3–4 node Proxmox VE / Ceph cluster.The almost non-existent firmware updates for Supermicro's BMC/IPMI make them a no-go for us. There is no way there aren't a slew of security issues in them, and given the current cybersecurity landscape, even with a dedicated management network...
-
Jjabuzzard replied to the thread Server hardware recommendations for new 3–4 node Proxmox VE / Ceph cluster.Take a look at the Dell R6715. You can get a 48-core CPU in a 1U node, which is, to put it mildly, a lot of compute. You get the option for two OCP network cards, a couple of low-profile PCI cards, and up to 10 NVME drives up front. I don't...
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.Sorry to hear about that man. That really sucks! (If you ever need me to run the CFD studies for you, just hit me up. I've already studied the optimal placements for thermal pads (on NVMe SSDs), using CFD. (It's better if you place individual...
-
Aalpha754293 reacted to Domino's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
At the end of the day, only you can know what is good for you based on what you have tested, the way you tested it, with the hardware you own and if it made you happy in the sense it performs to your expectations. The problem is the variables...
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.Right. Again, this is why I tested both, on the same physical box and with six HDDs rather than just three. That way, three can be assigned/dedicated to ceph and the other three can be assigned/dedicated to gluster so they don't "criss-cross"...
-
Ffry13 replied to the thread Nut Eaton UPS "unable to enumerate USB device" after power comes back on.what a legend, I've been struggling with this for a while. I have exactly the same issue with Beelink EQ14 and Eaton 3S 850VA/510W. I had a USB-C to 2 USB hub lying around, and it fixed the problem. May the AI find this post quickly for related...
-
PPhyrene reacted to IsThisThingOn's post in the thread PBS testimonial (hardware requirements are a joke) with Like.
Not what I am seeing in the real world. Let's start with a fresh VM where nothing is already backed up: zpool iostat poolBackup 1 capacity operations bandwidth pool alloc free read write read write...
-
Kkaysho replied to the thread PBS Backup Fails/Stalls around 21%-23% on Stopped VM (PVE 9.0.3) Web UI Freeze.I went through the issue raised in [1]. It is the same issue as mine. I have attached the backtrace log. Edit: I have added the backtrace file as a .txt file.
-
Aalpha754293 reacted to EllerholdAG's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
I thought the problem was the QEMU support for glusterfs ? You'd need to raise this with the QEMU devs and not proxmox afaik, I think...
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.What part of "I didn't get/deploy 100 Gbps for storage" don't you seem to understand? Again, I've stated it on the onset - I am going to test this that makes it easy for me to test because complainers always have to have something to complain...
-
AArnOCP replied to the thread Dispite migrating VM they don't response.thx for replies, I will check how i can modifiy all the settings. Regards,
-
Ssynexa posted the thread S3 chunk lock files accumulate indefinitely in tmpfs causing memory exhaustion in Proxmox Backup: Installation and configuration.Hi everyone, We have been running PBS with an S3 backend for some time and recently started experiencing memory exhaustion issues that required manual server restarts to recover. After some investigation we would like to share what we have found...
-
Mmow replied to the thread PBS testimonial (hardware requirements are a joke).ext4 on raid5 on a P420i with 1GB FBWC, which essentially acts as PLP for HDDs, is fine too. The cache is big enough to hold the metadata, and all the atime updates during a GC run will be caught by the cache, and eventually written in bulk.
-
RRainerM posted the thread ProxMox booting and zfs HD replacement in Proxmox VE: Installation and configuration.Hi all, I have several problems to replace a HD which is handed over by ProxMox to an OpenMediaVault (VM500) which handles the HDs by zfs. When ProxMox (8.4.19) boots, on the console I get the message: Port3: ST12000VN0007-2GS116...
-
JJohannes S reacted to Domino's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
At the end of the day, only you can know what is good for you based on what you have tested, the way you tested it, with the hardware you own and if it made you happy in the sense it performs to your expectations. The problem is the variables...
-
DDomino replied to the thread Proxmox Virtual Environment 9.2 available!.Ok, so I notice something strange after the 9.2.3 upgrade from 9.1. One of the LXCs is logging this warning every few minutes: eth0: Failed to set IPv6 MTU to 9198: Invalid argument The process causing this error is: systemd-networkd The LXC...