Latest activity
-
Mmow replied to the thread PBS testimonial (hardware requirements are a joke).ext4 on raid5 on a P420i with 1GB FBWC, which essentially acts as PLP for HDDs, is fine too. The cache is big enough to hold the metadata, and all the atime updates during a GC run will be caught by the cache, and eventually written in bulk.
-
RRainerM posted the thread ProxMox booting and zfs HD replacement in Proxmox VE: Installation and configuration.Hi all, I have several problems to replace a HD which is handed over by ProxMox to an OpenMediaVault (VM500) which handles the HDs by zfs. When ProxMox (8.4.19) boots, on the console I get the message: Port3: ST12000VN0007-2GS116...
-
JJohannes S reacted to Domino's post in the thread Glusterfs is still maintained. Please don't drop support! with
Like.
At the end of the day, only you can know what is good for you based on what you have tested, the way you tested it, with the hardware you own and if it made you happy in the sense it performs to your expectations. The problem is the variables... -
DDomino replied to the thread Proxmox Virtual Environment 9.2 available!.Ok, so I notice something strange after the 9.2.3 upgrade from 9.1. One of the LXCs is logging this warning every few minutes: eth0: Failed to set IPv6 MTU to 9198: Invalid argument The process causing this error is: systemd-networkd The LXC...
-
Cchristophe replied to the thread kernel 7.0 performance issue with zfs pools.Same here, garbage_collection tasks are (much) slower with 7.0.2-6 than with 6.17.13-11. Fastest verification on 7.0 kernel (6h35) is slower than slowest verification on 6.17 kernel (4h15). Christophe.
-
MFor reference: https://bugzilla.proxmox.com/show_bug.cgi?id=4420
-
Vvaschthestampede replied to the thread Unexpected backup failures.No, I do not. I also keep PBS up to date with the no-subscription repository. proxmox-backup: 4.2.0 (running kernel: 7.0.6-2-pve) proxmox-backup-server: 4.2.1-1 (running version: 4.2.1) proxmox-kernel-helper: 9.2.0 proxmox-kernel-7.0: 7.0.6-2...
-
Ppvedudez reacted to weuquibegruddi's post in the thread [TUTORIAL] Pass laptop's keyboard, touchpad and trackpoint into a VM with Like.
Hopefuly, it's ok to sum-it-up this way, as I was not able to find a post with complete summary on the topic - how to pass laptop's keyboard, touchpad and trackpoint into VM. Some of inputs were taken from this post. TLDR; for intel-based...
-
DDomino replied to the thread Glusterfs is still maintained. Please don't drop support!.At the end of the day, only you can know what is good for you based on what you have tested, the way you tested it, with the hardware you own and if it made you happy in the sense it performs to your expectations. The problem is the variables...
-
Ggernotmeyer67 posted the thread Firewall VM with network bridge with multiple different VLA configs in Proxmox VE: Networking and Firewall.Hi all, I need to migrate a virtual Firewall to PROXMOX from Hyper-V. My proxmox server has 3 NICs physical NICs (LAN1, DMZ, Internet). The Firewall VM has - one NIC to Internet - one to DMZ and - 7 NICs connected to LAN1: 3 NICs are without...
-
Vvaschthestampede replied to the thread Unexpected backup failures.I'm using my iSCSI target as local datastore. I'll explain what I did: I installed open-iscsi. I entered the credentials in the /etc/iscsi/iscsid.conf file. I discovered the iSCSI target's IP address. I logged in to the target and made it...
-
JFor reference: https://bugzilla.proxmox.com/show_bug.cgi?id=4420
-
Aalpha754293 replied to the thread Glusterfs is still maintained. Please don't drop support!.The most telling part about all of this is the answer to the question "what do you run, in your own personal homelab where you (often) don't have a multi-million dollar IT budget?" I'm going to go out on a limb here and surmise that what your...
-
-
Rraketmotor posted the thread Host hard-freezes with no logs on kernel 6.8.12-18-pve and forward, stable on kernel 6.8.12-16-pve, same hardware and workload, no BIOS change in Proxmox VE: Installation and configuration.Summary Hard host freeze / lockup regression between 6.8.12-16-pve and newer kernels. System is stable on 6.8.12-16-pve but experiences complete hangs on 6.8.12-18-pve and 7.0.2-6-pve. Environment Proxmox VE: 9.2 Current kernel exhibiting...
-
Jjekkelock posted the thread [SOLVED] SSL Certificate still not recognised after pvecm updatecerts --force in Proxmox VE: Installation and configuration.Im running on prox mox 4.2-5, When I tried to boot a VM I had offline it started throwing an error Failed to start VNC server: The server certificate /etc/pve/local/pve-ssl.pem has expired I run pvecm updatecerts -f and systemctl restart...
-
Sspleenftw reacted to Chris's post in the thread Switched from SMB to NFS and backups "disappeared" with Like.
These have however different permissions and seen to contain incorrectly encoded colons :. Is this just a formatting issue from your post or do you have this also in the raw output of ls? The last one has the right permissions and characters...
-
DDomino reacted to alpha754293's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
I played with gluster3.7 back in like 2018-2019 in an attempt to solve a very specific problem: burning through SSDs because of FEA scratch data. RAM doesn't have the same kind of finite write endurance limit like NAND flash based SSDs have. (If...
-
Sspleenftw replied to the thread Switched from SMB to NFS and backups "disappeared".Yup, that was it. spot on. I somehow only saw it when c/p here. fixed, ty :)
-
Dd-ing replied to the thread acme yandex360 dns-api.Where can I write to the developers to get this fixed? https://github.com/acmesh-official/acme.sh/issues/5213#issuecomment-4497145225
-
Sspleenftw replied to the thread Switched from SMB to NFS and backups "disappeared".Okay, for everyone that would have the same issue. I reread my post and looked at the filenames ; they had some weird unicode in them instead of the :: for the time data. Simply write a script that rename them and you should be fine. backup...
