Latest activity
-
fiona replied to the thread Kubernetes overlay networking breaks when upgrading from PVE 9.1 to PVE 9.2.3.If you see the VIRTIO_NET_F_HOST_UDP_TUNNEL_GSO_CSUM with QEMU 11.0, see also the following post: https://forum.proxmox.com/threads/qemu-11-0-available-on-pve-test-and-pve-no-subscription-as-of-now.183494/post-855731 -
Ddaanw replied to the thread [SOLVED] Cluster 2 node + qdevice, different pvecm status.chown root:coroqnetd /etc/corosync/nssdb/ chown root:coroqnetd /etc/corosync/nssdb/cert9.db chown root:coroqnetd /etc/corosync/nssdb/key4.db chmod 750 /etc/corosync/nssdb/ chmod 640 /etc/corosync/nssdb/*.db /etc/corosync/nssdb/*.txt systemctl...
-
JJohannes S reacted to guruevi's post in the thread Glusterfs is still maintained. Please don't drop support! with
Like.
I thought I was reading a 10yo post. How do you get Win11 to run on a 4th gen Intel? -
JJohannes S reacted to UdoB's post in the thread Glusterfs is still maintained. Please don't drop support! with Like.
Interesting read! Though I am not sure about your goal. Using pre-historic software for learning or as an experiment is... nice. Not more. (( PVE 7.x is out-of-support for two years now...
-
fiona reacted to tomten's post in the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now with Like.
@fiona It's an alpine linux vm (6.18.33-0-lts) running k3s with a flannel network config. agent: 1 balloon: 0 bios: seabios boot: order=scsi0;net0 cores: 4 cpu: host memory: 6144 meta: creation-qemu=7.1.0,ctime=1673013831 name: k3s-node4 net0...
-
fiona replied to the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now.Unfortunately, we were not able to reproduce the issue locally yet. When you have the chance, could you test again with QEMU 11.0 and with the following patch applied: [I] root@pve9a1 ~# cat tunnel-csum.patch @@ -1419,6 +1419,10 @@ sub...
-
MMartin.B. replied to the thread [SOLVED] Cluster 2 node + qdevice, different pvecm status.There is no corosync-qdevice service, only corosync-qnetd But looks like this is not running. pveq:/etc/corosync/qnetd# systemctl status corosync-qnetd.service × corosync-qnetd.service - Corosync Qdevice Network daemon Loaded: loaded...
-
Kkodamap replied to the thread SDN zone shows "pending" on peer nodes after node reboot (9.2.x).Thank you for looking into this! I'm looking forward to the update.
-
Ddaanw replied to the thread [SOLVED] Cluster 2 node + qdevice, different pvecm status.corosync-qnetd service is running (without problems) on 192.168.2.10? Can you telnet 192.168.2.10 5403 from the nodes?
-
PGenerally PBS retention and expiration works fine. However, if you recycle vms frequently, and don't reuse vmid numbers the last backups never go away. This is somewhat related to https://bugzilla.proxmox.com/show_bug.cgi?id=6074 which isn't...
-
LLeopold31 replied to the thread PBS failure with kernel 7.0.OK, So I've been pretty busy and hadn't got back to this yet. Until yesterday. I was going through all my backup devices and doing test restores and making sure the VMs that were restored were bootable. And guess what? We had a restore...
-
MMartin.B. replied to the thread [SOLVED] Cluster 2 node + qdevice, different pvecm status.setup of qdevice: pve3:~# pvecm qdevice setup 192.168.2.10 /bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub" /bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already...
-
Dd.oishi replied to the thread Update impossible after upgrade to PDM 1.1.1.I've encountered a similar phenomenon. 2026-06-02T21:42:00+09:00: starting apt-get update 2026-06-02T21:42:03+09:00: Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3...
-
fiona replied to the thread fs-agent warning.Hi, please see: https://forum.proxmox.com/threads/after-pve-8to9-upgrade-unable-to-check-guest-fs-freeze-status.183810/post-854913
-
Jjvliere posted the thread Update impossible after upgrade to PDM 1.1.1 in Datacenter Manager: Installation and configuration.After we upgrade from PDM 1.0 to 1.1.1 it's seems impossible to run de updates. We have a valid Base subscription and with the pdm-enterprise repository, we get the following error: 2026-06-02T14:37:47+02:00: starting apt-get update...
-
Thanks daanw, much appreciated! I ran the following command and will keep monitoring PVE for any potential hardware unit hangs. ethtool -K eno1 gso off gro off tso off -
spirit replied to the thread Proxmox 9.2.2 with Ceph Squid bad write performance.200MB/S with which block size ? iodepth ?
-
fiona replied to the thread TPM State problems with CEPH / Proxmox 9.2.Hi, are you using dual-stack networking https://forum.proxmox.com/threads/rbd-sysfs-write-failed-on-tpm-disks.131233/ ? Please share the storage configuration cat /etc/pve/storage.cfg, Ceph config /etc/pve/ceph.conf, VM config qm config 123 and...
-
Jjacky0815 replied to the thread [SOLVED] Fehler Aktivierung.Hallo Impact, danke. Jetzt habe ich zumindest den Fehler. Im Gegensatz zu den anderen möchte dieser Node shop.proxmox.com via IPv6 erreichen, obwohl er ebenso die IPv4-Adresse aufgelöst bekommt. Jetzt suche ich mal weiter.
-
YaZoal reacted to RobFantini's post in the thread [SOLVED] unable to read '"/etc/subscription"' - Permission denied (os error 13) (500) with Like.
After today's updates I get that message when I click on a node on pve screen # ll /etc/subscription -rw-r----- 1 root root 367 Jun 1 03:58 /etc/subscription this fixed the issue chmod 644 /etc/subscription