Latest activity
-
LLeopold31 replied to the thread PBS failure with kernel 7.0.OK, So I've been pretty busy and hadn't got back to this yet. Until yesterday. I was going through all my backup devices and doing test restores and making sure the VMs that were restored were bootable. And guess what? We had a restore...
-
MMartin.B. replied to the thread [SOLVED] Cluster 2 node + qdevice, different pvecm status.setup of qdevice: pve3:~# pvecm qdevice setup 192.168.2.10 /bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub" /bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already...
-
Dd.oishi replied to the thread Update impossible after upgrade to PDM 1.1.1.I've encountered a similar phenomenon. 2026-06-02T21:42:00+09:00: starting apt-get update 2026-06-02T21:42:03+09:00: Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3...
-
fiona replied to the thread fs-agent warning.Hi, please see: https://forum.proxmox.com/threads/after-pve-8to9-upgrade-unable-to-check-guest-fs-freeze-status.183810/post-854913 -
Jjvliere posted the thread Update impossible after upgrade to PDM 1.1.1 in Datacenter Manager: Installation and configuration.After we upgrade from PDM 1.0 to 1.1.1 it's seems impossible to run de updates. We have a valid Base subscription and with the pdm-enterprise repository, we get the following error: 2026-06-02T14:37:47+02:00: starting apt-get update...
-
Thanks daanw, much appreciated! I ran the following command and will keep monitoring PVE for any potential hardware unit hangs. ethtool -K eno1 gso off gro off tso off -
spirit replied to the thread Proxmox 9.2.2 with Ceph Squid bad write performance.200MB/S with which block size ? iodepth ?
-
fiona replied to the thread TPM State problems with CEPH / Proxmox 9.2.Hi, are you using dual-stack networking https://forum.proxmox.com/threads/rbd-sysfs-write-failed-on-tpm-disks.131233/ ? Please share the storage configuration cat /etc/pve/storage.cfg, Ceph config /etc/pve/ceph.conf, VM config qm config 123 and...
-
Jjacky0815 replied to the thread [SOLVED] Fehler Aktivierung.Hallo Impact, danke. Jetzt habe ich zumindest den Fehler. Im Gegensatz zu den anderen möchte dieser Node shop.proxmox.com via IPv6 erreichen, obwohl er ebenso die IPv4-Adresse aufgelöst bekommt. Jetzt suche ich mal weiter.
-
YaZoal reacted to RobFantini's post in the thread [SOLVED] unable to read '"/etc/subscription"' - Permission denied (os error 13) (500) with
Like.
After today's updates I get that message when I click on a node on pve screen # ll /etc/subscription -rw-r----- 1 root root 367 Jun 1 03:58 /etc/subscription this fixed the issue chmod 644 /etc/subscription -
TTaupsi replied to the thread Proxmox 9.2.3 - 2-Node Cluster Join: pve2 stays grey, pve-ssl.pem missing despite quorum.Here are the logs from both nodes after a clean join attempt (pvecm add 192.168.188.10 --force on pve2):
-
CChrisTG74 replied to the thread Roll out "custom certificate" updates via shell / api?.Oh, the pvenode commands are also valid for PMG? I didn't expect that. I thought they're only for PVE Nodes.
-
MMaltePScheuss replied to the thread Running Cisco UC Appliances In Proxmox (i.e., CUCM, CUCS, Expressway, IM&P, CMS, CSR1000v).Made ova import by using newest ova from cisco and followed ome of them https://forum.proxmox.com/threads/import-ova-or-virtual-image.114095/ CPU is set to host, becaue i use Intel Xeon Gold 6240, it has multiple avx512 flags in lscpu output and...
-
-
CChrisTG74 reacted to cheiss's post in the thread Roll out "custom certificate" updates via shell / api? with Like.
Hi, you are looking for this API endpoint: https://pve.proxmox.com/pve-docs/api-viewer/index.html#/nodes/{node}/certificates/custom Or on the shell with pvenode cert set: https://pve.proxmox.com/pve-docs/pvenode.1.html#cli_pvenode_cert_set
-
MMartin.B. replied to the thread [SOLVED] Cluster 2 node + qdevice, different pvecm status.reading a few more threads to crosync with qdevice and removing/setting it up some more times, it is still not voting. collected some more information. so on the pve nodes i have the follwing packages installed: pve3:~# dpkg -l | grep corosy ii...
-
JHallo zusammen, ein Node möchte keine Subscription mehr annehmen. Fehlermeldung lautet: "Error checking subscription: io: No route to host (os error 113) (500)". Er hat aber - wie alle anderen - auch ganz normal Internetzugriff. Weiß jemand wie...
-
Gguruevi replied to the thread Glusterfs is still maintained. Please don't drop support!.I thought I was reading a 10yo post. How do you get Win11 to run on a 4th gen Intel?
-
shanreich replied to the thread sdn Config. gateway not reachable.How does the routing table on the hosts (in particular the exit node) look like? ip r Did you disable rp_filter on the exit nodes? Does the firewall have a return route for external traffic? How does a tcpdump look like when trying to reach the... -
shanreich replied to the thread SDN zone shows "pending" on peer nodes after node reboot (9.2.x).I'll see if that doesn't trigger any edge cases with some OVS configurations and then update the detection accordingly!
-
cheiss replied to the thread Roll out "custom certificate" updates via shell / api?.Hi, you are looking for this API endpoint: https://pve.proxmox.com/pve-docs/api-viewer/index.html#/nodes/{node}/certificates/custom Or on the shell with pvenode cert set: https://pve.proxmox.com/pve-docs/pvenode.1.html#cli_pvenode_cert_set
