Latest activity
-
DDer Harry replied to the thread Problem with time within vms.```txt https://access.redhat.com/documentation/de-de/red_hat_enterprise_linux/7/html/virtualization_deployment_and_administration_guide/chap-kvm_guest_timing_management > When a guest is resumed after a pause or a restoration process, a command...
-
Pproxuser77 replied to the thread Problem with time within vms.Okay, okay, you got me with that. I should probably have read the Bugzilla report more carefully. Also someone already gently nudged it again yesterday. ;) But one more perhaps stupid question before I disappear: what about that Red Hat guide...
-
Llsichert replied to the thread lxc ssh out (9.1.9).Hi, first of all, do you have any SDN configuration on the PVE host or is the Container just connected to the default bridge of the host? If both are on the same bridge: Does ssh work from the proxmox host to the outside server? Otherwise, could...
-
AAndrew-ANS replied to the thread PDM Installer Freezes at 66%.I ran Get-FileHash "C:\Path\To\Your\file.iso" -Algorithm SHA256 in Powershell on my PC and the checksum matched. I downloaded the PDM ISO from the Proxmox website. It has been sitting since Thursday and it is still stuck at 66%. I am...
-
Ttomten replied to the thread QEMU 11.0 available on pve-test and pve-no-subscription as of now.@fiona It's an alpine linux vm (6.18.33-0-lts) running k3s with a flannel network config. agent: 1 balloon: 0 bios: seabios boot: order=scsi0;net0 cores: 4 cpu: host memory: 6144 meta: creation-qemu=7.1.0,ctime=1673013831 name: k3s-node4 net0...
-
DDer Harry replied to the thread Problem with time within vms.I mentioned it the ticket and here multiple times. It is in the ticket. Proxmox GmbH needs to just implement this. Red Had has a "set-clock" in QEmu Guest Agent. That is not as awesome as the VMware solution but - we in this thread and in the...
-
-
Pproxuser77 replied to the thread Problem with time within vms.I mean, yeah, the discussion is kind of pointless as long as nobody comes up with a specific proposal for how to actually fix the problem, which you apparently don't have either. And no, "VMware does it", "NTP is bad", or "using the hardware...
-
S---------- [Mon May 18 11:28:24 2026] UBSAN: shift-out-of-bounds in drivers/i3c/master/dw-i3c-master.c:1646:21 [Mon May 18 11:28:24 2026] shift exponent 18446744073709486145 is too large for 64-bit type 'long unsigned int' [Mon May 18 11:28:24...
-
-
PNo worries, I don't need anybody to defend me. Plus, I didn't read the thread very carefully or I would have seen that the OP was using NTP but noted that his issue was the gap between VM startup and when NTP noticed the wrong time. The hook...
-
DDer Harry replied to the thread Problem with time within vms.In the bugzilla ticket, I mentioned that NTP is very clumsy. The hwclock approach is much better. But it's still not a 100% solution.
-
DDer Harry replied to the thread Problem with time within vms.... i have no more words for you.
-
JJohannes S reacted to SteveITS's post in the thread PVE 8.4 — anyone just... not upgrading? with
Like.
Re repos, https://forum.proxmox.com/threads/new-archive-cdn-for-end-of-life-eol-releases.178957/ -
JNo worries, I don't need anybody to defend me. Plus, I didn't read the thread very carefully or I would have seen that the OP was using NTP but noted that his issue was the gap between VM startup and when NTP noticed the wrong time. The hook...
-
JI'm not denying that there are situations where this can be critical. Although in such cases, you might simply avoid making any changes to the VM until you have a maintenance window, put the application into maintenance mode, take the snapshot...
-
JSo, what is the question then? I mean, your post isn't providing any concrete suggestions on how to fix it eitehr. And If it did, it would probably be better placed in the existing Bugzilla report. Complaining, "nagging", and statements such as...
-
BBobhWasatch replied to the thread Problem with time within vms.No worries, I don't need anybody to defend me. Plus, I didn't read the thread very carefully or I would have seen that the OP was using NTP but noted that his issue was the gap between VM startup and when NTP noticed the wrong time. The hook...
-
JSorry if I accidentally stepped on your bad mood. Was just trying to solve the immediate problem.
-
JYou have to configure NTP to correct the time when the delta is large, else it won't correct this problem. How you do that varies by NTP server. For chrony you need something like "makestep 0.1 -1" in the config file. Apparently you don't all...
-
Pproxuser77 replied to the thread Problem with time within vms.I'm not denying that there are situations where this can be critical. Although in such cases, you might simply avoid making any changes to the VM until you have a maintenance window, put the application into maintenance mode, take the snapshot...
-
SteveITS replied to the thread SSD Optimize not working inside Windows 2022 server.Yes. A detailed explanation is on the alldiscoveries.com site linked in that thread, which suggests 2M since it's the Hyper-V default, though that post you quoted suggests the 8M. YMMV I guess. 2M solved the issue for us.
