Latest activity
-
Mmax1337 reacted to Psilospiral's post in the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve with
Like.
daanw - you are correct. It seems an upgrade to the newest kernel and my fusion-io drivers did not agree. Thanks to Vladimir for helping with DKMS driver removal and reinstallation. I had to: Get the versions installed with DKMS by requesting... -
Mmax1337 reacted to daanw's post in the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve with Like.
This bootlog shows Linux kernel 6.8.12 belonging to Debian 12/bookworm and PVE 8? I do see zfs 2.4.2-pve1 though, indicating PVE 9, which might also explain a number of zfs errors in the bootlog. Please check with cat /etc/debian_version and...
-
Mmax1337 replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.Hi daanw, thanks for the tips. I think I was able to move forward a bit but could not solve my issue, yet. Here is the link to the new thread. Max
-
FFearless-Grape5584 replied to the thread Optimizing Proxmox VE for Low-Latency Game Hosting (Geometry Dash-Style Server).Since you're focused on a clean, reliable setup without overcomplicating things, here's my take — especially on the network and security side, which hasn't been covered much in this thread. Network isolation first With a public-facing game...
-
Mmax1337 posted the thread [SOLVED] PVE loses network connection after update from 8.x to 9.x in Proxmox VE: Networking and Firewall.I updated my two PVEs recently and one of the servers did not come back to the network. The update itself went smooth and I followed the update guidelines step by step. I followed this thread for a while but it was a different problem to mine in...
-
Nnv.nguyen replied to the thread Unbound faild after upgrade..Turn off apparmor service
-
abied-charreton reacted to janus57's post in the thread Way more NAGware, very little functionality, bugs galore with Like.
Hi, Well, if you use the enterprise license, that is not the question, since you have access to enterprise PDM, and NO community license is not an enterprise license. From my POV the community license is here to help pay for the IT... -
abied-charreton reacted to Johannes S's post in the thread Way more NAGware, very little functionality, bugs galore with Like.
So you basically announce to spam the same arguments again and again in the hope you will get your wish instead of a moderator intervention? Masterful gambit, sir
-
abied-charreton reacted to janus57's post in the thread Way more NAGware, very little functionality, bugs galore with Like.
Hi, No, but with almost every reply you nag about the PDM enterprise not included inside the PVE community subscription, which was already replied by proxmox team and will not change, so why try again and again ? You are just trying to convince...
-
JThe more generic way e.g. used by the Debian installer is cryptsetup +LUKS ( e.g. you can follow https://reintech.io/blog/configuring-luks-encrypted-disk-debian-12 ) I would not recommend to use encryption within the VMs, you will need to handle...
-
dcsapak replied to the thread Tried PDM for the first time (version 1.1) - had issues.hi, AFAIK there is no special setup done on the first boot, so just let it boot and shutdown should have the same effect as directly shutting down. adding a shutdown button at the end of the installation is IMO a rather niche use case. you... -
dcsapak replied to the thread LXC container migration using Proxmox Datacenter Manager.what is the error you get? it might be that currently not all source storage type -> target storage type migrations are supported, this must be implemented on the pve side
-
BBrodesps replied to the thread [SOLVED] Cannot Install Proxmox on T610 Poweredge with H700 PERC card.Hi again Onslow, Ubuntu gave me an unknown error the last time I tried to install but it seems that it's fixed itself? After trying different USBs and taking sweet time, Proxmox 9.2-1 seems to be working, even in UEFI with ability to use my PERC...
-
Yyrzorg replied to the thread Unbound faild after upgrade..Hi, I recently updated PMG to version 9.0.7, and since then unbound refuses to start Here's the current situation: Running on Hyper-V VM The service fails immediately with exit code 1. I've already tried disabling the remote-control interface...
-
Uuzumo replied to the thread SSD Optimize not working inside Windows 2022 server.Is this the solution? Change the settings so that the system recognizes the slab as 8 MB https://forum.proxmox.com/threads/server-2022-defrag-trim-pegging-cpu-and-ram.161514/post-818884
-
cwt reacted to Keeper of the Keys's post in the thread [feature suggestion] Degraded ZFS pools should be reflected in node state with Like.
@daanw I know I can have mail alerts, my point is that a pve/pbs node that has a degraded pool or smart errors for that matter should not be showing "all green/OK" in the summary or PDM dashboards, the system is NOT ok and may be teetering on a... -
abied-charreton replied to the thread Workaround needed for default PVE self-signed CA/certs and python3.13's new strict cert checking.Hey! This has been fixed with pve-cluster 9.1.2 [0]: pve-cluster (9.1.2) trixie; urgency=medium * fix #6701: setup: add keyUsage extension to root CA for RFC 5280 compliance. Python 3.13 now enforces strict X.509 validation, which broke...
-
Mmax1337 replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.Actually not. Just two nvme ssds and a sata one.
-
The more generic way e.g. used by the Debian installer is cryptsetup +LUKS ( e.g. you can follow https://reintech.io/blog/configuring-luks-encrypted-disk-debian-12 ) I would not recommend to use encryption within the VMs, you will need to handle... -
Hello, please read openzfs encryption too. on the net are many references about this. Our is: # https://openzfs.org/wiki/ZFS-Native_Encryption And see the result of a search: # https://openzfs.org/w/index.php?search=Encryption I use outside...