Latest activity
-
Bbl1mp reacted to Rollux's post in the thread Help to fix Proxmox access issues after power cut with
Like.
Sorry for the long duration between posts - I *think* I may have found the issue - the PSU has given up the ghost - the 4pin power connector near the CPU has no power output now - so Im wondering if low power/current supply at this over time has... -
Bbl1mp replied to the thread Restoring backup on another system does not work.Hi Peter, can you elaborate a little bit on the commands and results of your steps? And also some interesting information to understand your issue can be provided by lsblk; cat /etc/pve/storage.cfg BR, Lucas
-
GGMBauer replied to the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs?.Ich glaube, genau hier liegt der jumping point. Wenn ich eine Synology kaufe, dann kaufe ich nicht eine Hardware mit ein paar Massenspeicherslots und einer für Home-Lab-User zu schwachen CPU, sondern ich kaufe - und ich glaube, dass da niemand...
-
maxprox reacted to fireon's post in the thread [TUTORIAL] ZFS-Autosnaptshot inkl. Rollback und Daten direkt recovern (Windows/Linux) with Like.
Hab den Header nun angepasst. Ich benutze das Verfahren seit Jahren. Funktioniert hier immer noch sehr gut :cool:. -
Uuzumo replied to the thread [feature suggestion] Degraded ZFS pools should be reflected in node state.I don’t think your feature request will likely be implemented even if you post it on the forum. Please check the URL below to see if your request already exists. If it does, please add your comment to the existing thread; if not, please submit a...
-
Uuzumo replied to the thread Proxmox GUI hang - not response.If replacing the CPU with the one you used previously resolves the issue, you should contact the CPU manufacturer rather than checking the Proxmox forums. When dealing with hardware issues, running any commands will not resolve the problem. I...
-
KKeeper of the Keys posted the thread [feature suggestion] Degraded ZFS pools should be reflected in node state in Proxmox VE: Installation and configuration.Recently one of my PVE machines had a degraded RAIDz2 pool where 2 disks just disappeared, since the redundancy level is 2 I did not notice this at all in day to day work. The disks returned to being detected with a reboot and resilvered in a few...
-
PPeterZ posted the thread Restoring backup on another system does not work in Proxmox VE: Installation and configuration.Hi all Running PVE v 8.4.19, I want to upgrade to V9 and replace the disk so I created a backup from 1 LXC and offloaded it with SCP. Moving the 3 files to my previous server with a fresh install, first 9.1, later 8.4.0 This keeps going wrong...
-
guletz replied to the thread [SOLVED] Backup and dedupe a VM with LUKS.Hi, As far as I know, luks does not know to use trim, so the size of the backup will be bigger. In any case, the restore I think with/without luks must be finished without any errors ... if you do not have any problems. Some time ago I have such... -
OOnslow replied to the thread [SOLVED] Cannot Install Proxmox on T610 Poweredge with H700 PERC card.@Brodesps For further testing you can also try Ubuntu and Debian as these are most similar to PVE (PVE uses a kernel derived from Ubuntu [1] and PVE is based on Debian [2]). [1] https://pve.proxmox.com/wiki/Proxmox_VE_Kernel#Proxmox_VE_9 [2]...
-
We will re-evaluate it, but cannot make any promises. What we also look into periodically is reducing the attack surface in general, like we started rolling out some simple but relatively effective approach to block autoloading of various niche... -
Ggfngfn256 replied to the thread About 100% error reporting due to pveproxy.service hooks.Adjust your repos - and I imagine that error will disappear on reboot.
-
Ggfngfn256 reacted to Markku's post in the thread About 100% error reporting due to pveproxy.service hooks with Like.
No. Its purpose is to update the APT package repository information, for reporting to the admin if there are updates available. The actual installation of the available upgrades is not part of the pveupdate (or apt update) step.
-
Ddaanw replied to the thread Network issues on kernel-6.8.12-28-pve causing cluster to fail.Check the output of journalctl -b of a problematic boot for errors. Specifically look for (network) devices failing to initialize properly (udev / kernel modules) causing services to fail.
-
RRaylane replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..Okay aber das sollte soweit ich das verstanden habe noch nicht mein Problem sein da ich die VM's händisch per Weboberfläche am Handy auswähle. Aber der Kernel Build schon vorab nicht funktioniert. Ich nutz auch nur diese Variante da das Resource...
-
MMarkusKo replied to the thread [SOLVED] Backup and dedupe a VM with LUKS.True but my point is if your VM disk is thin provisioned and you don't overwite it at install completely with random data it won't use the full disk size (at least in the beginning).
-
MMarkku replied to the thread About 100% error reporting due to pveproxy.service hooks.No. Its purpose is to update the APT package repository information, for reporting to the admin if there are updates available. The actual installation of the available upgrades is not part of the pveupdate (or apt update) step.
-
RRaylane replied to the thread Kernel panic VFS: Unable to mount root fs on unknown-block (0,0) sobald ein 7.x Kernel verwendet wird..Vielen Dank für die schnellen Antworten. Okay werde ich mir mal anschauen. Wie gesagt mein Wissen ist ehr das eines Anfängers. Ich hab damals einfach einen Guide bei Reddit ausprobiert. Gibt es einen Einfachen Befehl um Zwischen dem Proxmox...
-
-
FFrank-75 replied to the thread Proxmox GUI hang - not response.Good morning, I didn't enter the result of cat /proc/mdstat because it doesn't return any results. The sdb disk is mounted as a directory in Proxmox because the logical volume is a hardware array. The CTRL is hardware-based; it's an HPE P420 2GB...
-
MMarkku reacted to BobhWasatch's post in the thread The PVENode task list in PVE9 is partially obscured due to the terminal font being too large. with Like.
Just to be clear...the way terminals work is they use fixed-size character cells. So many lines by so many columns. This information is communicated to the remote end so it knows how much room there is on the display. The remote end has limited...
