Latest activity
-
Ddaanw replied to the thread Device names on linux guest, change between machine versions.It was not clear from your post you were talking about a guest. Interface naming conventions change in other distro's too. Which distro is on the guest? Is it a VM or LXC?
-
RolandK replied to the thread [SOLVED] DegradedArray alert day after upgrading pve8 to 9.in general - be careful with mdadm raid1 in conjunction with direct-io. there is a reason why proxmox discurages using it and is not supporting it either https://bugzilla.kernel.org/show_bug.cgi?id=99171 -
RolandK replied to the thread file system issue with block device passthrough.what does lsblk -f /dev/disk/by-id/usb-TO_Exter_nal_USB_3.0_2015033100081-0:0 tell ? and lsblk --version on host and inside vm ? also print fdisk -l for usb drive and for mapped drive inside vm
-
Ccrawrj replied to the thread Noob with weird network issue.OK, I think I see my mistake. I will do some additional testing tomorrow and report back. Thanks for your help!!!!!!
-
Ccrawrj replied to the thread Noob with weird network issue.Also, I can confirm it is LACP-related. I removed all LACP on both ends, and it is working. Right now, I just have one management NIC and two cluster nics active. Rebooted host1, and it is working. auto lo iface lo inet loopback auto...
-
Ccrawrj replied to the thread Noob with weird network issue.OK, maybe I am completely misremembering how I last set up VMware, since it has been about 6 years since then. My current VMware install was done before me and only has one NIC. So, what is the proper way to use Proxmox with multiple NIC's? Can...
-
bbgeek17 replied to the thread Noob with weird network issue.The system reported the above message, we have no reason to doubt this. If something changed since then - we have no evidence of it. An LACP bond that is misconfigured between two network nodes leads to an unpredictable behavior. Trying to... -
Ccrawrj replied to the thread Noob with weird network issue.First of all, I don't take offense. I know you are trying to help. I am a noob to raw Linux and have never used Proxmox. I have used VMware, Cisco, and a ton of other technologies for more than 20 years, so I'm not at all new on the technology...
-
Ooptical posted the thread Proxmox 8 to 9 introduced LXC terminal problems in Proxmox VE: Installation and configuration.What's up with this? Only half my screen is usable, it's cut off 50% of my terminal at the bottom and a bunch at the right side too Was not a problem until 8 to 9 Thanks!!
-
-
Ttomasich replied to the thread PBS backup space grow up constantly.As I wrote, I run GC avery night... but the curve grow up as you can see, why? Can I provide you some logs to understand? Vm are the same, just one has a small database but modification by day are very small, many other vm has no data incremets...
-
Jjanus57 replied to the thread PBS backup space grow up constantly.Hi, Now you need to run the GC and wait 24h5min or 1445min (default setting). Prunning doesn't free the space immediately, it's only the GC that can free the space. And have you check your backup log to see the size of data backup ? Best regards,
-
bbgeek17 replied to the thread Troubles Connecting Tintri NFS to Proxmox HA GUI.Most likely there is an issue (network or configuration) with RPC requests. The exports are probed via "showmount" and "rpcinfo". Try these commands manually, if they fail - the PVE probes will be unsuccessful and you will not be able to manage...
-
WWe're pleased to announce the release of Proxmox Backup Server 4.2. This version is based on Debian 13.4 ("Trixie"), uses Linux kernel 7.0 as the new stable default for improved hardware support, and comes with ZFS 2.4 for reliable...
-
Ttomasich replied to the thread PBS backup space grow up constantly.You have to look at 4th...
-
bbgeek17 replied to the thread Noob with weird network issue.To be on the same page, none of this is PVE specific. You are dealing with basic Linux network management. At one point in the thread you mentioned that there is a "direct" connectivity between the clients, is there an actual direct cable? Your...
-
Jjanus57 replied to the thread PBS backup space grow up constantly.Hi, Between your 2nd and 3rd posts, there is a huge difference. You should look at the prune log back in time to find out why the pruning was not happening, because your screen on the 2nd post is not "well done" like you thought (because you...
-
Ttomasich replied to the thread PBS backup space grow up constantly.I run now the prune instead of 11pm and here the result: I attach prune logs but it seems all well.
-
-
Ttomasich replied to the thread PBS backup space grow up constantly.Hi here you have: And if you check a vm backup for example: It seems all well done.
-
-
Ccrawrj replied to the thread Noob with weird network issue.I stripped it down to just this, and it is still happening. I don't understand. And it is only interconnectivity between the hosts. I can access and ping both hosts from my PC, just not from host1 to host2. auto lo iface lo inet loopback auto...
