Latest activity
-
CSolved thanks to bbgeek17. LACP misconfiguration on my end. I am not new to technology, but I have never used Proxmox before. I have been setting up my first cluster. I have two Dell servers and a QDevice. Cluster is active. The weird issue I am...
-
Mmrskeed reacted to Davidegb's post in the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares with
Like.
I have updates on my installation stability. With the upgrade to pve-qemu-kvm 11.0 from 10.2.1, proxmox 8 kernel (6.8.12) was having trouble with i/o threading. Suddenly every vm was queueing I/o, to the point that global iodelay was greater... -
RRobFantini replied to the thread [SOLVED] backup fails: Unable toacquire lock "/var/log/proxmox-backup/tasks/.active.lock.also during backups other nodes had the following errors. however the backups succeeded May 26 00:00:12 pve7 pve-ha-lrm[3892712]: VM 101 qmp command failed - VM 101 qmp command 'query-status' failed - got timeout May 26 00:00:10 pve2...
-
Ppille99 replied to the thread connecting sdn to edge firewall.i figured it already i need to configure bgp on the firewall part.
-
Ddas1996 reacted to Davidegb's post in the thread Severe system freeze with NFS on Proxmox 9 running kernel 6.14.8-2-pve when mounting NFS shares with Like.
I have updates on my installation stability. With the upgrade to pve-qemu-kvm 11.0 from 10.2.1, proxmox 8 kernel (6.8.12) was having trouble with i/o threading. Suddenly every vm was queueing I/o, to the point that global iodelay was greater...
-
YYuri_AR posted the thread Improving performance of RaidZ1 in Proxmox VE: Installation and configuration.Hi! One of the nodes I'm using Proxmox in is experiencing high IOwait from time to time, and I'm very confident this is because physical disk bandwidth limitation. The storage being affected is a 3 disk raidZ1 pool, all of them 2.5" SSDs (Mix of...
-
Hhungryhamster092 replied to the thread Proxmox 9.2 installer hangs: waiting for /dev to be fully populated.using nomodeset worked for me
-
AAleXSR700 reacted to Impact's post in the thread PVE becomes unreachable via ethernet but OS is running with Like.
Check journalctl -k.
-
AAleXSR700 reacted to UdoB's post in the thread PVE becomes unreachable via ethernet but OS is running with Like.
Triple check if there is an IP address conflict. Your systems have static addresses, right? I've seen conflicts too often...
-
Ddevzero replied to the thread [SOLVED] Proxmox, openvswitch and no vlan setting in container is letting see the container all vlans.All clear, thanks.
-
AAleXSR700 replied to the thread PVE becomes unreachable via ethernet but OS is running.Okay, so, `journcalctl -k` of this morning'S incident: I think the server becomes unreachable only when i am connected to it and using it (either the proxmox ui or one of the vms/lxcs. It does not seem to happen just because I was offline for a...
-
Fflax8334 replied to the thread Expanded Support for PBS Client (Arm64, Ubuntu).Since there are currently no deb-src available one would need to build these from source from your git.proxmox.com repo? This is not exactly easy or user friendly. Would it be possible to compile it for arm at the same time you build the static...
-
shanreich replied to the thread SDN, IPAM & DHCP.It allocates IPs per NIC and should also distribute them via DHCP - if the zone is configured to do so. -
DDerekG replied to the thread High boot disk usage on Proxmox 9.2 node (Ext4).Thanks Impact, that command seems to be working the same as ncdu -x, except it also shows the mounted stores. The total usage is as I said 13GB of 26Gb indicted in the Proxmox GUI. The problem is that the usage seems to have grown after the...
-
shanreich replied to the thread [SOLVED] PVE loses network connection after kernel upgrade to proxmox-kernel-7.0.0-3-pve.as the previous poster already said, logs of the boot as well as an overview of the network configuration would be interesting: journalctl -b > syslog.txt cat /etc/network/interfaces cat /etc/network/interfaces.d/sdn
-
RolandK replied to the thread building pve kernel fails with make[2]: *** [debian/rules:281: abicheck] Fehler 1.thank you very much! will retry and report. -
shanreich replied to the thread [SOLVED] Proxmox, openvswitch and no vlan setting in container is letting see the container all vlans.Not setting any VLAN Tag is always equivalent to creating a trunk port with all VLANs allowed, there's currently no other option other than not attaching the interface in the first place or setting the 'disconnect' parameter instead.
-
CChrisTG74 replied to the thread HD space (root) zu 93% voll.Eigentlich blöd, dass die Update-Funktion bei den Proxmox-Tools nie selbst ein "autoremove" ausführt. Das ist weder beim PVE, noch beim PMG so. Oder gibt es einen Grund, warum dies nicht getan wird? Autoremove sollte ja eigentlich safe sein...
-
Mmicneu replied to the thread Bester Weg für Fileserver (samba).Hast du schon bei Google oder in der Forensuche geschaut?
-
UdoB reacted to jdancer's post in the thread ZFS with PERC H745: is RAID0 the same as JBOD? with Like.
On 13th- & 14th-gen Dells PERCs, have to delete the virtual disks before switching it to HBA-mode. Call it a quirk. I've also had issues with the megaraid_sas driver in the past, so I just swap out the PERCs for Dell HBA330s, which is a true...