Latest activity
-
FWhile you can mix the old and the new format, the new (deb822) format has been supported since (at least) bullseye and is recommended since trixie. You can convert all your sources to the new format using: apt modernize-sources See...
-
Ddaanw replied to the thread Upgrade from 3.3 to 3.4.While you can mix the old and the new format, the new (deb822) format has been supported since (at least) bullseye and is recommended since trixie. You can convert all your sources to the new format using: apt modernize-sources See...
-
Jjanus57 replied to the thread Upgrade from 3.3 to 3.4.Hi, Is it, it's the now format. My PBS (installed from ISO) has this configuration file and it can update : deb http://ftp.fr.debian.org/debian bookworm main contrib deb http://ftp.fr.debian.org/debian bookworm-updates main contrib #...
-
-
Hharunk replied to the thread S3 Hetzner failures with Gargbage collection.since the issue is not recurring consistently it's not easy to debug. Currently we have set PBS to access internet directly via firewall instead of via proxy and have also deactivated the verify job since it was taking days. Both the changes...
-
Ffhagemann replied to the thread Upgrade from 3.3 to 3.4.I did, it starts with upgrading top 3.4. Here is what I missed: File: /etc/apt/sources.list.d/proxmox.sources I created the file, and changed "trixie" to "bookworm". Now the upgrade works as expected. I assumed this different format was only...
-
shanreich replied to the thread [SOLVED] SDN Fabric issues since update 9.1.14.ARP requests seem to be sent properly over the correct interfaces, but there's no response. This is on the other interfaces as well - which is odd. Can you post the output of ip route show table all We could also check the respective sysctls... -
Ggfngfn256 replied to the thread UEFI 2011 certificates expire in June 2026!.AFAIK, on a Linux VM you need only to run the qm enroll-efi-keys <vmid> to update the certs. The update will take effect on the next boot.
-
Jjanus57 replied to the thread Upgrade from 3.3 to 3.4.Hi, Have you read and followed the upgrade doc[0] ? [0]https://pbs.proxmox.com/wiki/Upgrade_from_3_to_4 Best regards,
-
Ffhagemann posted the thread Upgrade from 3.3 to 3.4 in Proxmox Backup: Installation and configuration.Hi! I am trying to upgrade a server ver. 3.3 to 3.4 (and later to 4.x). Original install from ISO in VM, no subscription... /etc/apt/sources.list apt-get update apt-get dist-upgrade What am I missing to upgrade to 3.4? I think I am...
-
Iio2345 replied to the thread Kann Container aus Backup nicht zurückspielen: unable to restore CT - unable to detect disk size - please specify rootfs (size).Der Fehler liegt wohl in der Konfiguration der Backup-Einstellungen in ioBroker. Der sichert momentan lokal statt auf der NAS, und da war dann natürlich irgendwann platzmäßig "Ende Gelände". Muss mal sehen, wo man das einstellt. Nur noch...
-
Ggfngfn256 replied to the thread Issue with maintenance mode in custer.Expected behavior, as shown in the docs:
-
Hi, With a status of "HA state - none" it seems that it is a normal behavior. Best regards, -
UdoB replied to the thread Backup tool for standalone ZFS datasets to Proxmox Backup Server.No. PBS is tolerant: any "normal" filesystem is sufficient. It just stores a large number of 4 MiB "large" files. That's all it does... Edit: https://pbs.proxmox.com/docs/storage.html#disk-management -- mentions ext4 and xfs...
-
Ddea posted the thread Problem on LTO-9 with kernel 7.0.x in Proxmox Backup: Installation and configuration.Hello everyone, I hope I’m not creating a duplicate thread. On PBS 4.2.0, equipped with an LTO-9, I have no issues with kernel 6.17.13-11, whereas with 7.0.x it isn’t recognised. Name HP-LTO9 Vendor HPE Model Ultrium_9-SCSI Many...
-
Jjanus57 replied to the thread Issue with maintenance mode in custer.Hi, With a status of "HA state - none" it seems that it is a normal behavior. Best regards,
-
Ccelemine1gig replied to the thread RTX 6000 Ada stuck in D3cold under vfio-pci, function .0 disappears from PCI tree after remove/rescan survives reboot but recurs.If not already done, give the kernel parameter "vfio-pci.disable_idle_d3=1" a try.
-
Eerdius replied to the thread Backup tool for standalone ZFS datasets to Proxmox Backup Server.Thanks, the only concern was that i have over 50TB of zfs pool data on my pve. on my backup server i don't know if I have enough drives to get a zfs pool that size up, which is why i originally went with unraid (ability to use diff drive sizes)...
-
DThat's it. Thanks a lot.
-
NNickyDoes replied to the thread Backup tool for standalone ZFS datasets to Proxmox Backup Server.I'm pretty sure PBS only backs up to ZFS datastores. Edit: PBS is tolerant of any "normal" filesystem (per UdoB below). But I don't understand your concern. ZFS is, I think, the best way to make leftover drives into one or more pools, even...
-
Uuzumo replied to the thread UEFI 2011 certificates expire in June 2026!.As for Linux, I suppose shim is replaced using apt or something similar, but judging from other threads, I’m a bit concerned about whether it will work properly. Linux mokutil --sb-state mokutil --db | grep -A13 "\[key" mokutil --dbx | grep -A13...
