Latest activity
-
MMateo_123 posted the thread shim-signed update - should new shim be copied to ESP automatically? in Proxmox VE: Installation and configuration.After upgrading shim-signed (1.48+pmx1) on a bare metal PVE host (9.1 -> 9.2) I noticed that /boot/efi/EFI/debian/shimx64.efi was not updated automatically. The new shim signed with both Microsoft UEFI CA 2011 and 2023 was available at...
-
Ggeormanth replied to the thread [SOLVED] [pve8] kernel: EDID has corrupt header.Hello, The problem still exists, here is my solution. (UEFI Boot) Create a blacklisting configuration file: nano /etc/modprobe.d/blacklist-matrox.conf Paste the following line to prevent the Matrox video driver from loading: blacklist...
-
TTarbouif posted the thread [SOLVED] resizing PMG HDD root in Mail Gateway: Installation and configuration.Hi everybody I have a problem with my PMG (VM on vmware) : the dev/mapper/pmg-root is near to be full (95% full) if in ssh console I do un "df -h" : but with fdisk -l : /dev/sda3 49,5G I woud like to extend /dev/mapper/pmg-root to the max...
-
-
Ffruchtzwerg replied to the thread [TUTORIAL] Developer Workstation (Proxmox-VE 9) with cinnamon (LMDE7).I installed an openwrt-VM that manages all the network's WAN by passing through the wifi-card and the usb-device that usually provides internet. The upside of this setting is, that openwrt as a router/ gateway also handles all the network...
-
Daniel-Doggy posted the thread [SOLVED] Backup and dedupe a VM with LUKS in Proxmox Backup: Installation and configuration.Hello everyone, I am current planning on adding LUKS to a VM that I also use as a desktop to access my internal VMs. I would think/asume that dedupe for the VM on PBS would still work with LUKS encryption apart from that it can only dedupe with... -
Aa.woll replied to the thread [SOLVED] PMG v9.0.7 versendet keine Spam-Reports.Ich hab den Fehler gefunden: Ich habe die letzte Zeile in /usr/lib/systemd/system/pmgspamreport.service wie unten angepasst: [Unit] Description=Send Daily Spam Report Mails ConditionPathExists=/usr/bin/pmgqm After=postfix.service...
-
Uunsichtbarre reacted to UdoB's post in the thread Update to Proxmox Installation and Configuration manual with
Like.
The content seems fine. I just picked a very few pages and read them quickly/fast - I dug into them only slightly. (And English is not my native language...) -
JNaja, Proxmox kann ja nicht unbedingt etwas für Hardware-Defekte. Und die PVE-Installation ist vermutlich schneller wieder eingerichtet, als die ioBroker-Installation, oder? Sehr gut, dass Du die Backups vom Server holen konntest. Falls Du ein...
-
cwt replied to the thread RTX 6000 Ada stuck in D3cold under vfio-pci, function .0 disappears from PCI tree after remove/rescan survives reboot but recurs.This „smells“ more like a PCIe/BIOS power management problem than a Proxmox config error. A quick test would be to swap the RTX cards in this slot and check, if the error persists with the swapped card. What you could check before and after the... -
JJohannes S replied to the thread ifupdown2 fun after upgrade.ProxmoxVE doesn't use ifupdown but ifupdown2. That's the reason you have do do it via an reinstall of ifupdown2 instead of ifupdown. I wonder however how such an error is even possible shouldn't the normal update Procedure take care you don't end...
-
JJohannes S reacted to aaron's post in the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs? with Like.
Was wenn du im "Monitor" der VM "info balloon" eintippst? Vergleich den Output mit einer VM wo die Gast Sicht der RAM Anzeige wie erwartet klappt. Denn der Guest Agent wird nicht für die Abfrage der RAM Auslastung aus Gast Sicht benötigt. Hier...
-
Dd.oishi reacted to unsichtbarre's post in the thread Update to Proxmox Installation and Configuration manual with Like.
Greetings! The Proxmox installation and configuration manual I published earlier this year (https://forum.proxmox.com/threads/proxmox-installation-and-configuration-manual.181116/#post-840113) has been updated with inclusions for critical...
-
Why not at least share that single line? I'd check this grep -sR "dss" /etc/ssh /root/.ssh /etc/pve -
UdoB replied to the thread Update to Proxmox Installation and Configuration manual.The content seems fine. I just picked a very few pages and read them quickly/fast - I dug into them only slightly. (And English is not my native language...)
-
UdoB reacted to drbeam's post in the thread CRS und Backups - CRS schiebt VM während Backup weg -> Job schlägt fehl with Like.
Erledigt: https://bugzilla.proxmox.com/show_bug.cgi?id=7622 Keine Ahnung, warum ich nicht an Bugzilla gedacht habe - ist halt Sonntag :)
-
UdoB replied to the thread Node Notes; blank after cluster join.See also https://forum.proxmox.com/threads/pve-node-note-blank.183816/
-
UdoB replied to the thread Node Notes; blank after cluster join.See also https://forum.proxmox.com/threads/pve-node-note-blank.183816/
-
HHerman1 replied to the thread ceph-osd crashes with kernel 6.17.2-1-pve on Dell system.Unfortunately still having the same issue even with 7.x kernel: Linux pve 7.0.2-6-pve #1 SMP PREEMPT_DYNAMIC PMX 7.0.2-6 (2026-05-20T08:55Z) x86_64 GNU/Linux 2026-05-25T04:56:28.342706+00:00 pve kernel: Call Trace...
-
ulf.kosack replied to the thread ifupdown2 fun after upgrade.That's it. Thanks a lot. -
If you lost connectivity after purging ifupdown (which removes stuff that also belongs to ifupdown2), manually creating /run/network/ and (re)starting networking services should get you going again. Once you have a working network connection...
