Latest activity
-
Daniel-Doggy posted the thread [SOLVED] Backup and dedupe a VM with LUKS in Proxmox Backup: Installation and configuration.Hello everyone, I am current planning on adding LUKS to a VM that I also use as a desktop to access my internal VMs. I would think/asume that dedupe for the VM on PBS would still work with LUKS encryption apart from that it can only dedupe with... -
Aa.woll replied to the thread [SOLVED] PMG v9.0.7 versendet keine Spam-Reports.Ich hab den Fehler gefunden: Ich habe die letzte Zeile in /usr/lib/systemd/system/pmgspamreport.service wie unten angepasst: [Unit] Description=Send Daily Spam Report Mails ConditionPathExists=/usr/bin/pmgqm After=postfix.service...
-
Uunsichtbarre reacted to UdoB's post in the thread Update to Proxmox Installation and Configuration manual with
Like.
The content seems fine. I just picked a very few pages and read them quickly/fast - I dug into them only slightly. (And English is not my native language...) -
JNaja, Proxmox kann ja nicht unbedingt etwas für Hardware-Defekte. Und die PVE-Installation ist vermutlich schneller wieder eingerichtet, als die ioBroker-Installation, oder? Sehr gut, dass Du die Backups vom Server holen konntest. Falls Du ein...
-
cwt replied to the thread RTX 6000 Ada stuck in D3cold under vfio-pci, function .0 disappears from PCI tree after remove/rescan survives reboot but recurs.This „smells“ more like a PCIe/BIOS power management problem than a Proxmox config error. A quick test would be to swap the RTX cards in this slot and check, if the error persists with the swapped card. What you could check before and after the... -
JJohannes S replied to the thread ifupdown2 fun after upgrade.ProxmoxVE doesn't use ifupdown but ifupdown2. That's the reason you have do do it via an reinstall of ifupdown2 instead of ifupdown. I wonder however how such an error is even possible shouldn't the normal update Procedure take care you don't end...
-
JJohannes S reacted to aaron's post in the thread Gibt es mit PVE 2.x ggf. Änderungen bei der RAM-Nutzung, bzw. deren Anzeige bei VMs? with Like.
Was wenn du im "Monitor" der VM "info balloon" eintippst? Vergleich den Output mit einer VM wo die Gast Sicht der RAM Anzeige wie erwartet klappt. Denn der Guest Agent wird nicht für die Abfrage der RAM Auslastung aus Gast Sicht benötigt. Hier...
-
Dd.oishi reacted to unsichtbarre's post in the thread Update to Proxmox Installation and Configuration manual with Like.
Greetings! The Proxmox installation and configuration manual I published earlier this year (https://forum.proxmox.com/threads/proxmox-installation-and-configuration-manual.181116/#post-840113) has been updated with inclusions for critical...
-
Why not at least share that single line? I'd check this grep -sR "dss" /etc/ssh /root/.ssh /etc/pve -
UdoB replied to the thread Update to Proxmox Installation and Configuration manual.The content seems fine. I just picked a very few pages and read them quickly/fast - I dug into them only slightly. (And English is not my native language...)
-
UdoB reacted to drbeam's post in the thread CRS und Backups - CRS schiebt VM während Backup weg -> Job schlägt fehl with Like.
Erledigt: https://bugzilla.proxmox.com/show_bug.cgi?id=7622 Keine Ahnung, warum ich nicht an Bugzilla gedacht habe - ist halt Sonntag :)
-
UdoB replied to the thread Node Notes; blank after cluster join.See also https://forum.proxmox.com/threads/pve-node-note-blank.183816/
-
UdoB replied to the thread Node Notes; blank after cluster join.See also https://forum.proxmox.com/threads/pve-node-note-blank.183816/
-
HHerman1 replied to the thread ceph-osd crashes with kernel 6.17.2-1-pve on Dell system.Unfortunately still having the same issue even with 7.x kernel: Linux pve 7.0.2-6-pve #1 SMP PREEMPT_DYNAMIC PMX 7.0.2-6 (2026-05-20T08:55Z) x86_64 GNU/Linux 2026-05-25T04:56:28.342706+00:00 pve kernel: Call Trace...
-
ulf.kosack replied to the thread ifupdown2 fun after upgrade.That's it. Thanks a lot. -
If you lost connectivity after purging ifupdown (which removes stuff that also belongs to ifupdown2), manually creating /run/network/ and (re)starting networking services should get you going again. Once you have a working network connection...
-
tcabernoch replied to the thread UEFI 2011 certificates expire in June 2026!.Ah. I ran the PS thing on a VM that did NOT have UEFI. So ya. It choked. It works fine everywhere else I tried it. PS C:\Users\tcabernoch> [System.Text.Encoding]::ASCII.GetString((Get-SecureBootUEFI db).bytes) -match 'Windows UEFI CA 2 023'... -
Ppetzold007 replied to the thread RTX 5080 VFIO passthrough fails on Proxmox VE 9.1 with error getting device from group 13: No such device.Ran into similar issue, turned out the issue for me is that vfio_pci messed up with power state, below module param worked for me. # or just adding vfio-pci.disable_idle_d3=1 to the kernel cmdline sudo insmod vfio_pci.ko disable_idle_d3=1
-
MI hit the same problem. For me the solution was to use create a new instance of the zfs-import@.service with a symbolic link by running this command (pool was named mainpool, adjust accordingly): ln -s /lib/systemd/system/zfs-import@.service...
-
MThat helped me too